{"title":"Inductive Proximity Sensors NZ","description":"\u003cp\u003eInductive proximity sensors detect metal without touching it. They work as end stops, for position sensing and for counting metal parts. NZN stocks the M12 LJ12A3-4 in two output types: the LJ12A3-4-Z\/BX is NPN normally open and the LJ12A3-4-Z\/BY is PNP normally open. Both sense steel up to 4 mm away, other metals at a shorter distance, and run from 6 to 36 V DC. Pick the output type your controller or PLC input expects. Stock is held in New Zealand and orders are dispatched within 24 hours.\u003c\/p\u003e","products":[{"product_id":"lj12a3-4-zby-inductive-proximity-sensor-pnp-no","title":"LJ12A3-4-Z\/BY Inductive Proximity Sensor - PNP NO, 4 mm","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\u003cp class=\"nznpd__intro\"\u003eThe LJ12A3-4-Z\/BY is an M12 inductive proximity sensor for detecting metal without contact. Its PNP normally-open output switches on when a suitable metal target enters the nominal 4 mm sensing range. Use it for position sensing and end-stop detection with a compatible DC control input.\u003c\/p\u003e\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eLJ12A3-4-Z\/BY\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput\u003c\/span\u003e\u003cstrong\u003ePNP, normally open, three-wire\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSupply\u003c\/span\u003e\u003cstrong\u003e6 to 36 V DC; nominal 12 to 24 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eNominal sensing distance\u003c\/span\u003e\u003cstrong\u003e4 mm ±10% with iron target\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRecommended set distance\u003c\/span\u003e\u003cstrong\u003e0 to 3.6 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaximum output current\u003c\/span\u003e\u003cstrong\u003e300 mA\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eResponse frequency\u003c\/span\u003e\u003cstrong\u003e500 Hz\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting\u003c\/span\u003e\u003cstrong\u003eM12 threaded barrel, non-flush\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody length\u003c\/span\u003e\u003cstrong\u003e56.7 mm nominal, excluding cable relief\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing \/ sensing face\u003c\/span\u003e\u003cstrong\u003eNickel-plated brass \/ ABS\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eEnclosure rating\u003c\/span\u003e\u003cstrong\u003eIP67 (supplier rating); protect cable joints separately\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTemperature\u003c\/span\u003e\u003cstrong\u003e-30 to +65 °C, no condensation or freezing\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/LJ12A3-4-ZBY-Datasheet-v1.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the LJ12A3-4-Z\/BY datasheet (PDF)\"\u003e\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLJ12A3-4-Z\/BY sensor with attached cable\u003c\/strong\u003e\u003cp\u003eIncludes two mounting nuts and two lock washers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eMetal part detection\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003ePosition sensing on jigs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCNC end stops with a compatible PNP input\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck the input and wiring\u003c\/strong\u003e\u003cp\u003eConfirm the diagram on the supplied sensor. Standard three-wire PNP wiring is brown to positive, blue to 0 V and black to the compatible input or load, with its return at 0 V.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMount and power it\u003c\/strong\u003e\u003cp\u003eKeep the blue sensing face proud of surrounding metal. With power off, connect a regulated DC supply within the stated range. Apply power and bring an iron target within the set distance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck detection\u003c\/strong\u003e\u003cp\u003eThe input should activate near the target and release when it is removed. Allow for a shorter detection range with non-magnetic metals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e When the sensor switches on, its black output wire sits close to the supply voltage. Connect it to an input rated for that voltage, such as a 12 to 24 V PLC input. An Arduino or ESP32 needs an interface that brings the signal down to 3.3 V or 5 V, so do not connect the black wire straight to a GPIO pin. If your controller expects an NPN sensor, fit the \u003ca href=\"\/products\/lj12a3-4-zbx-inductive-proximity-sensor-npn-no\"\u003eLJ12A3-4-Z\/BX NPN version\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LEFIRCKO","offers":[{"title":"Default Title","offer_id":50519515234400,"sku":"SEN-LJ12A3-PNP-NO","price":5.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/lj12a3-4-zby-full-kit-hero-r3.png?v=1795230875"},{"product_id":"lj12a3-4-zbx-inductive-proximity-sensor-npn-no","title":"LJ12A3-4-Z\/BX Inductive Proximity Sensor - NPN NO, 4 mm","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThe LJ12A3-4-Z\/BX is an M12 inductive proximity sensor that detects metal without touching it. Its NPN normally-open output pulls the black wire to 0 V when steel comes within about 4 mm of the blue face, which suits CNC and 3D printer end stops, part counters and PLC inputs that expect a sinking signal. For a sourcing (PNP) input, choose the \u003ca href=\"\/products\/lj12a3-4-zby-inductive-proximity-sensor-pnp-no\"\u003eLJ12A3-4-Z\/BY PNP version\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eLJ12A3-4-Z\/BX\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput\u003c\/span\u003e\u003cstrong\u003eNPN, normally open, 3-wire\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSupply\u003c\/span\u003e\u003cstrong\u003e6 to 36 V DC (12 to 24 V nominal)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSensing distance\u003c\/span\u003e\u003cstrong\u003e4 mm ±10% with a steel target\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSet distance\u003c\/span\u003e\u003cstrong\u003e0 to 3.6 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput current\u003c\/span\u003e\u003cstrong\u003e300 mA maximum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eResponse frequency\u003c\/span\u003e\u003cstrong\u003e500 Hz\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody\u003c\/span\u003e\u003cstrong\u003eM12 thread, 56.7 mm long, non-flush\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing \/ face\u003c\/span\u003e\u003cstrong\u003eNickel-plated brass \/ ABS\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRating\u003c\/span\u003e\u003cstrong\u003eIP67 sensor body\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTemperature\u003c\/span\u003e\u003cstrong\u003e-30 to +65 °C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWires\u003c\/span\u003e\u003cstrong\u003eBrown +V, blue 0 V, black output\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/LJ12A3-4-ZBX-Datasheet-v1.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the LJ12A3-4-Z\/BX datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLJ12A3-4-Z\/BX sensor with attached cable\u003c\/strong\u003e\u003cp\u003eAbout 1 m of 3-core cable with bare ends, plus two M12 hex nuts and two star lock washers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eZ-axis or homing end stop on a CNC router or 3D printer\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCounting steel bolts or gear teeth going past\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eDetecting a gate, arm or carriage at the end of travel\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eFeeding a sinking (NPN) PLC input\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePower it from 6 to 36 V DC\u003c\/strong\u003e\u003cp\u003eBrown to +V and blue to 0 V. A 12 V or 24 V supply is the usual choice.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the load to +V\u003c\/strong\u003e\u003cp\u003eWire a relay coil, lamp or PLC input between the black wire and +V. When steel comes within about 4 mm, the black wire is pulled to 0 V and the load switches on.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eReading it with Arduino, ESP32 or a printer board\u003c\/strong\u003e\u003cp\u003eDo not wire the black lead straight to a 3.3 V or 5 V pin while the sensor runs from 12 or 24 V. Fit a signal diode in series (cathode to the black wire, the band end), enable the pin's pull-up, and join the board's GND to the blue wire. The pin reads LOW when metal is detected. An optocoupler input works too.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMount it\u003c\/strong\u003e\u003cp\u003ePass the barrel through a 12.5 mm hole and clamp it with a nut and star washer on each side. Leave the blue cap clear of the bracket, then set the gap to your target within 0 to 3.6 mm.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sensing range is quoted for mild steel. Aluminium, brass and stainless steel are detected at a shorter distance, and plastic, wood and glass are not detected at all.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"LEFIRCKO","offers":[{"title":"Default Title","offer_id":67684747673696,"sku":"SEN-LJ12A3-4-NPN-NO","price":5.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-lj12a3-4-zbx-npn-proximity-sensor-kit-hero.png?v=1792636764"}],"url":"https:\/\/www.nznelectronics.co.nz\/collections\/inductive-proximity-sensors.oembed","provider":"NZN Electronics","version":"1.0","type":"link"}