{"title":"Motors \u0026 Drivers","description":"\u003cp\u003eMicro servos, stepper motor kits and stepper motor drivers for robotics, CNC and 3D printer projects.\u003c\/p\u003e","products":[{"product_id":"mg90s-servo","title":"MG90S Metal Gear Micro Servo - 180° or 360° Continuous","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA compact MG90S metal gear micro servo for Arduino, ESP32, RC and robotics projects. Choose the 180 degree positional version for controlled movement, or the 360 degree continuous-rotation version for speed and direction control.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eGear train\u003c\/span\u003e\u003cstrong\u003eMetal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eVersions\u003c\/span\u003e\u003cstrong\u003e180 degree positional or 360 degree continuous\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSupply\u003c\/span\u003e\u003cstrong\u003e4.8 V to 6.0 V DC\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl\u003c\/span\u003e\u003cstrong\u003eStandard 3-wire servo signal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTypical torque\u003c\/span\u003e\u003cstrong\u003e1.8 kgf·cm at 6.0 V, 180 degree version\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003eAbout 12 g\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody size\u003c\/span\u003e\u003cstrong\u003e22.6 × 12.1 × 22.5 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting span\u003c\/span\u003e\u003cstrong\u003e27.6 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHole centres\u003c\/span\u003e\u003cstrong\u003e17.6 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting holes\u003c\/span\u003e\u003cstrong\u003e2.2 mm diameter\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLead colours\u003c\/span\u003e\u003cstrong\u003eBrown ground, red power, orange signal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/MG90S-Datasheet-v3.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the MG90S servo technical datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/MG90S-180-QuickStart.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the MG90S 180 degree servo Quick Start guide (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003e180 degree Quick Start guide\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMG90S metal gear micro servo\u003c\/strong\u003e\u003cp\u003eSupplied with a horn set and mounting screws. Horn shape and screw appearance can vary between batches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRobot joints and grippers\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRC steering and control surfaces\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003ePan and tilt mounts\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSmall drive wheels and rollers\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAnimatronics\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino and ESP32 learning projects\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConfirm the version\u003c\/strong\u003e\u003cp\u003eUse the 180 degree version when you need a commanded angle. Use the 360 degree version when you need continuous speed and direction control.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the three wires\u003c\/strong\u003e\u003cp\u003eBrown is ground, red is 4.8 V to 6.0 V power, and orange is the control signal. Join the servo and controller grounds.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStart at neutral\u003c\/strong\u003e\u003cp\u003eTest without a linkage attached. Begin near a 1.5 ms pulse, then move gradually away from neutral and check the actual response.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePower it for the real load\u003c\/strong\u003e\u003cp\u003eFor loaded operation or multiple servos, use a suitable separate regulated supply and keep a common ground with the controller.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"180 Degrees","offer_id":42666174414944,"sku":"SRV-MG90S-180","price":5.49,"currency_code":"NZD","in_stock":true},{"title":"360 Degrees","offer_id":42666174447712,"sku":"SRV-MG90S-360","price":5.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/mg90s-hero-pure-white-protected-2026-08-31.png?v=1788093653"},{"product_id":"28byj-48-stepper-motor-kit","title":"28BYJ-48 Stepper Motor + ULN2003 Driver Board Kit (5V)","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA compact 5 V geared stepper motor kit for clocks, dials, camera sliders, learning projects and light automation. The included ULN2003A driver board connects the motor to four microcontroller GPIO pins, while the keyed 5-pin plug keeps the motor connection straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor model\u003c\/span\u003e\u003cstrong\u003e28BYJ-48\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRated supply\u003c\/span\u003e\u003cstrong\u003e5 V DC\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor type\u003c\/span\u003e\u003cstrong\u003e4-phase unipolar geared stepper\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eDriver board\u003c\/span\u003e\u003cstrong\u003eULN2003A Darlington array\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl inputs\u003c\/span\u003e\u003cstrong\u003eIN1 to IN4\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eGPIO logic\u003c\/span\u003e\u003cstrong\u003e3.3 V or 5 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFull-step position count\u003c\/span\u003e\u003cstrong\u003e2048 nominal steps per output revolution\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHalf-step position count\u003c\/span\u003e\u003cstrong\u003e4096 nominal steps per output revolution\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor connector\u003c\/span\u003e\u003cstrong\u003eKeyed 5-pin plug\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/28BYJ-48-Datasheet-v3.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the 28BYJ-48 stepper motor kit technical datasheet PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/28BYJ-48-QuickStart.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the 28BYJ-48 stepper motor kit beginner Quick Start guide PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eBeginner Quick Start guide\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e28BYJ-48 5 V motor and ULN2003A driver board\u003c\/strong\u003e\u003cp\u003eThe motor includes its attached five-wire lead and keyed plug. A controller, jumper wires and power supply are required separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eClock hands and pointer dials\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSmall camera and display turntables\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomated vents and light mechanisms\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSlow robotics and model projects\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino, ESP32 and Raspberry Pi learning\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRepeatable low-speed positioning\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePlug in the motor\u003c\/strong\u003e\u003cp\u003eConnect the motor's keyed 5-pin plug to the white socket on the driver board.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the control inputs\u003c\/strong\u003e\u003cp\u003eWire IN1, IN2, IN3 and IN4 to four digital GPIO pins on your microcontroller.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSupply 5 V power\u003c\/strong\u003e\u003cp\u003ePower the driver board from 5 V and connect its ground to the microcontroller ground. Use a separate 5 V supply when the motor is under load.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eChoose the step mode\u003c\/strong\u003e\u003cp\u003eStart with 2048 positions per output revolution for full-step control or 4096 for half-step control. These are nominal values; calibrate the finished mechanism when an exact angle matters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck the firing order\u003c\/strong\u003e\u003cp\u003eIf the motor buzzes without turning, check the library's coil sequence. With Arduino Stepper, the common constructor order is IN1, IN3, IN2, IN4.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eFull walkthrough:\u003c\/strong\u003e See the \u003ca href=\"\/blogs\/guides\/28byj-48-arduino-uln2003-guide\"\u003e28BYJ-48 Arduino wiring, code and troubleshooting guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42868336984160,"sku":"MOD-28BYJ48-ULN2003-KIT-1","price":6.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/28byj-48-uln2003-kit-hero-protected.png?v=1788852626"},{"product_id":"tower-pro-sg90-9g-micro-servo-motor-arduino-rc-nz","title":"SG90 9g Micro Servo - 90°, 180° and 360° Options","description":"\u003cdiv class=\"nznpd\"\u003e\n  \u003cp class=\"nznpd__intro\"\u003eThe SG90 is a compact 9 g servo for Arduino, RC and robotics projects. Choose 90° for a short positional arc, 180° for standard angle control, or 360° for continuous rotation. All three options use the same 3-wire connection, body and mounting pattern, and each comes with horns and screws.\u003c\/p\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__pick\"\u003e\n      \u003cdiv class=\"nznpd__pick-card\"\u003e\n        \u003ch4\u003e90° - Short positional arc\u003c\/h4\u003e\n        \u003cp\u003eMoves through a 90° arc and holds position. Its useful Arduino range is typically \u003ccode class=\"nznpd__code\"\u003ewrite(90)\u003c\/code\u003e to \u003ccode class=\"nznpd__code\"\u003ewrite(180)\u003c\/code\u003e.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"nznpd__pick-card\"\u003e\n        \u003ch4\u003e180° - Standard positional\u003c\/h4\u003e\n        \u003cp\u003eMoves to a commanded angle and holds it across a full 180° sweep. This is the version most tutorials and projects expect.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"nznpd__pick-card\"\u003e\n        \u003ch4\u003e360° - Continuous rotation\u003c\/h4\u003e\n        \u003cp\u003eTurns continuously in either direction. The signal controls speed and direction, not shaft angle, with neutral around 1500 µs.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"nznpd__subhead\"\u003eTechnical details\u003c\/div\u003e\n    \u003cdiv class=\"nznpd__specs\"\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eSG90 9 g micro servo\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRotation options\u003c\/span\u003e\u003cstrong\u003e90°, 180° or 360°\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eGear type\u003c\/span\u003e\u003cstrong\u003ePlastic\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating voltage\u003c\/span\u003e\u003cstrong\u003e4.8 to 6 V DC\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl signal\u003c\/span\u003e\u003cstrong\u003e50 Hz PWM, 3-wire\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnector\u003c\/span\u003e\u003cstrong\u003e3-pin JR \/ Futaba style\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003e90° control\u003c\/span\u003e\u003cstrong\u003eTypically 1500 to 2000 µs\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003e180° control\u003c\/span\u003e\u003cstrong\u003eTypically 500 to 2500 µs\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003e360° control\u003c\/span\u003e\u003cstrong\u003eNeutral around 1500 µs; either side sets direction and speed\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSpeed\u003c\/span\u003e\u003cstrong\u003eAbout 0.1 s per 60°\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStall torque\u003c\/span\u003e\u003cstrong\u003eAbout 1.6 kgf·cm at 4.8 V; 1.8 kgf·cm at 6 V\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCurrent\u003c\/span\u003e\u003cstrong\u003eAbout 5 to 10 mA idle, 100 to 250 mA running, up to 700 mA stalled\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody size\u003c\/span\u003e\u003cstrong\u003e23.0 × 12.0 × 22.8 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting span\u003c\/span\u003e\u003cstrong\u003e32.2 mm across the tabs\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLead length\u003c\/span\u003e\u003cstrong\u003eAbout 25 cm\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003eAbout 9 g\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire colours\u003c\/span\u003e\u003cstrong\u003eBrown GND, red V+, orange signal\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eController logic\u003c\/span\u003e\u003cstrong\u003e3.3 V or 5 V signal\u003c\/strong\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__ds\"\u003e\n      \u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/SG90-Datasheet-AllVariants-v3.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open the SG90 technical datasheet PDF in a new tab\"\u003e\n        \u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"1.8\" stroke-linecap=\"round\" stroke-linejoin=\"round\" aria-hidden=\"true\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpath d=\"M14 2v6h6\"\u003e\u003c\/path\u003e\u003cpath d=\"M12 18v-6\"\u003e\u003c\/path\u003e\u003cpath d=\"m9 15 3 3 3-3\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n        \u003cspan\u003eSG90 technical datasheet \u003cspan class=\"lo\"\u003eAll three rotation options\u003c\/span\u003e\u003c\/span\u003e\n        \u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003c\/span\u003e\n      \u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__included\"\u003e\n      \u003cspan class=\"nznpd__qty\"\u003e1×\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSG90 servo in your selected rotation option\u003c\/strong\u003e\u003cp\u003eIncludes three servo horn arms and mounting screws.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__uses\"\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eRobot arms and grippers\u003c\/strong\u003e\u003cp\u003eUse the 180° option for repeatable position control.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eSteering and control surfaces\u003c\/strong\u003e\u003cp\u003eThe 180° option suits RC and small mobile projects.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eLatches and short linkages\u003c\/strong\u003e\u003cp\u003eThe 90° option covers mechanisms that only need a short arc.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eDrive wheels and rovers\u003c\/strong\u003e\u003cp\u003eUse 360° when you need continuous forward and reverse motion.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eRotating displays and conveyors\u003c\/strong\u003e\u003cp\u003eThe 360° option controls direction and speed.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eArduino and STEM projects\u003c\/strong\u003e\u003cp\u003eA compact servo for prototypes, kits and classroom builds.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003cdiv class=\"nznpd__qs\"\u003e\n      \u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n      \u003col class=\"nznpd__steps\"\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the three wires\u003c\/strong\u003e\u003cp\u003eBrown goes to GND, red to a regulated 4.8 to 6 V supply, and orange to the controller's signal pin.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eShare the ground\u003c\/strong\u003e\u003cp\u003eIf the servo has a separate power supply, connect its ground to the Arduino, ESP32 or receiver ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eUse the right control range\u003c\/strong\u003e\u003cp\u003eFor 90°, start with \u003ccode\u003ewrite(90)\u003c\/code\u003e to \u003ccode\u003ewrite(180)\u003c\/code\u003e. For 180°, use \u003ccode\u003ewrite(0)\u003c\/code\u003e to \u003ccode\u003ewrite(180)\u003c\/code\u003e. End points vary slightly between units, so test the travel before fitting the horn to a loaded mechanism.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSet neutral on the 360° option\u003c\/strong\u003e\u003cp\u003e\u003ccode\u003ewrite(90)\u003c\/code\u003e or about 1500 µs should stop it. If it creeps, adjust the neutral value slightly until the shaft stays still.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eAllow enough current\u003c\/strong\u003e\u003cp\u003eOne unloaded servo can be tested from a development board's 5 V pin. For a loaded servo or several servos, use a separate regulated supply with a common ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n      \u003c\/ol\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\r\n","brand":"NZN Electronics","offers":[{"title":"90°","offer_id":42998800285792,"sku":"SRV-SG90-9G-90","price":4.49,"currency_code":"NZD","in_stock":true},{"title":"180°","offer_id":42755664380000,"sku":"SRV-SG90-9G-180","price":4.49,"currency_code":"NZD","in_stock":true},{"title":"360°","offer_id":42783975932000,"sku":"SRV-SG90-9G-360","price":4.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/SG90-Servo-Hero.png?v=1785116450"},{"product_id":"tmc2209-stepper-motor-driver-module-silent-uart-3d-printer-cnc","title":"TMC2209 Silent Stepper Motor Driver Module with Heatsink","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA compact black V985 TMC2209 module for quieter bipolar stepper control in 3D printers, CNC machines and motion projects. It supports conventional STEP\/DIR control or UART configuration, works with 3.3 V or 5 V logic, and includes a blue aluminium heatsink for the reverse-side thermal area.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eController\u003c\/span\u003e\u003cstrong\u003eTMC2209-LA\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard\u003c\/span\u003e\u003cstrong\u003eBlack V985 module\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor supply\u003c\/span\u003e\u003cstrong\u003e5.5 V to 38 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLogic supply\u003c\/span\u003e\u003cstrong\u003e3.3 V or 5 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl modes\u003c\/span\u003e\u003cstrong\u003eSTEP\/DIR or UART\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaximum output\u003c\/span\u003e\u003cstrong\u003e2 A supplier maximum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRecommended current\u003c\/span\u003e\u003cstrong\u003eUp to 1.7 A with suitable cooling\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMicrostepping\u003c\/span\u003e\u003cstrong\u003eUp to 256 subdivisions\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStandalone modes\u003c\/span\u003e\u003cstrong\u003e1\/8, 1\/16, 1\/32 or 1\/64\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHeader format\u003c\/span\u003e\u003cstrong\u003e2 × 8 pins, 2.54 mm pitch\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard size\u003c\/span\u003e\u003cstrong\u003e20.50 × 15.0 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003e7.0 g with heatsink\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TMC2209-Datasheet-v3.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the TMC2209 Silent Stepper Motor Driver Module with Heatsink technical datasheet PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"quick-start-guide\" class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TMC2209-QuickStart.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the TMC2209 Silent Stepper Motor Driver Module with Heatsink quick start guide PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eQuick Start guide\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTMC2209 driver module\u003c\/strong\u003e\u003cp\u003eBlack V985 board with both header rows soldered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eBlue aluminium heatsink\u003c\/strong\u003e\u003cp\u003eSupplied loose with thermal adhesive for the reverse-side gold area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003e3D printer axis upgrades\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCNC and laser motion\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eQuiet robotics\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLinear stages and automation\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSwitch off every supply\u003c\/strong\u003e\u003cp\u003eDisconnect motor power, logic power and USB before inserting the module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMatch every pin label\u003c\/strong\u003e\u003cp\u003eConfirm VM, GND, VIO, DIR, STEP and EN against the carrier board. Do not rely on the board outline alone.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFit the heatsink correctly\u003c\/strong\u003e\u003cp\u003eRemove the blue protective film and place the flat adhesive base on the large gold thermal area on the reverse of the board.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eChoose the control mode\u003c\/strong\u003e\u003cp\u003eSet the carrier-board jumpers and firmware for STEP\/DIR or UART operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStart conservatively\u003c\/strong\u003e\u003cp\u003eConnect one winding to M1A\/M1B and the other to M2A\/M2B, begin at low current, and test with a short slow move.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Never connect or disconnect motor windings while VM is powered. The 2 A figure is a supplier-stated maximum, not a continuous no-cooling target. Actual current capability depends on heatsink contact, airflow and the assembled machine.\u003c\/p\u003e\n\u003c\/div\u003e\n\r\n","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42898512642144,"sku":"MOD-TMC2209","price":7.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-tmc2209-hero-component-side.png?v=1787916377"},{"product_id":"agfrc-c02cls-micro-servo-2-2g-coreless-digital-1s-0-11kg-cm","title":"AGFRC C02CLS Micro Servo – 2.2g Coreless Digital (1S, 0.11kg·cm)","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:system-ui,-apple-system,BlinkMacSystemFont,\"Segoe UI\",Roboto,Helvetica,Arial,sans-serif;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__highlights{list-style:none;padding:0;margin:24px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:36px}\n.nznpd__highlights li{display:flex;gap:11px;align-items:flex-start;font-size:14px;color:var(--ink);line-height:1.5;padding:12px 0;border-bottom:1px solid var(--line)}\n.nznpd__highlights li::before{content:\"\\25B8\";flex:0 0 auto;color:var(--o);font-size:12px;line-height:1.75}\n.nznpd__highlights li:nth-last-child(-n+2){border-bottom:none}\n.nznpd__qs{background:#FFF7EF;border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 24px;padding-bottom:10px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__dsbar{display:flex;align-items:center;gap:11px;padding:14px 16px;border-top:2px solid var(--line);background:#FFF8F1;text-decoration:none;color:var(--od);font-weight:700;font-size:14px;line-height:1.3;transition:background .16s ease}\n.nznpd__dsbar:hover{background:#FCEBD8}\n.nznpd__dsbar svg{flex:0 0 auto;color:var(--o)}\n.nznpd__dsmeta{margin-left:auto;display:flex;align-items:center;gap:8px;font-size:12px;font-weight:600;color:var(--mut);text-transform:uppercase;letter-spacing:.03em;white-space:nowrap}\n.nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px}\n.nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center}\n.nznpd__included strong{display:block;font-size:15px;margin-bottom:3px}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__faqs{display:grid;gap:10px}\n.nznpd__faq{border:2px solid var(--line);border-radius:12px;background:#fff;padding:0 16px;transition:border-color .18s ease}\n.nznpd__faq[open]{border-color:#FCE0C6}\n.nznpd__faq summary{list-style:none;cursor:pointer;padding:15px 0;font-weight:700;font-size:14px;color:var(--ink);display:flex;justify-content:space-between;align-items:center;gap:12px}\n.nznpd__faq summary::-webkit-details-marker{display:none}\n.nznpd__faq summary::after{content:\"\\203A\";flex:0 0 auto;color:var(--o);font-weight:800;font-size:20px;line-height:1;display:inline-block;transform:rotate(90deg);transition:transform .22s ease}\n.nznpd__faq[open] summary::after{transform:rotate(-90deg)}\n.nznpd__faq p{padding:0 0 16px;font-size:14px}\n.nznpd__faq[open] p{animation:nznpdReveal .24s ease}\n@keyframes nznpdReveal{from{opacity:0;transform:translateY(-5px)}to{opacity:1;transform:translateY(0)}}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (prefers-reduced-motion:reduce){.nznpd__faq summary::after{transition:none}.nznpd__faq[open] p{animation:none}.nznpd__dsbar{transition:none}}\n@media (max-width:999px){.nznpd{padding-left:16px;padding-right:16px}}\n@media (max-width:749px){.nznpd{padding-left:14px;padding-right:14px}.nznpd__intro{font-size:15.5px}.nznpd__highlights{grid-template-columns:1fr;margin-top:18px}.nznpd__highlights li:nth-last-child(2){border-bottom:1px solid var(--line)}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__h{margin-bottom:16px}.nznpd__dsmeta{font-size:11px}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThe AGFRC C02CLS is an ultra-light \u003cstrong\u003e2.2g\u003c\/strong\u003e coreless digital sub-micro servo, built for small RC aircraft, helicopters and micro robotics where every gram matters. It runs on a single LiPo cell (\u003cstrong\u003e1S, 3.6–4.2V\u003c\/strong\u003e) and delivers fast, precise response from a tiny footprint. Important: this is a 1S servo, so power it from \u003cstrong\u003e3.6–4.2V\u003c\/strong\u003e, not the usual 5–6V.\u003c\/p\u003e\n\u003cul class=\"nznpd__highlights\"\u003e\n\u003cli\u003eUltra-light 2.2g sub-micro body\u003c\/li\u003e\n\u003cli\u003eCoreless motor for fast, precise response\u003c\/li\u003e\n\u003cli\u003eDigital circuit with 5µs dead band\u003c\/li\u003e\n\u003cli\u003e1S powered (3.6–4.2V), single LiPo cell\u003c\/li\u003e\n\u003cli\u003eAround 0.11kg·cm torque at 4.2V\u003c\/li\u003e\n\u003cli\u003eQuick 0.06s \/ 60° at 4.2V\u003c\/li\u003e\n\u003cli\u003e20T spline, ~120° operating travel (180° mechanical limit)\u003c\/li\u003e\n\u003cli\u003eStandard 3-wire PWM (Arduino \/ ESP32 \/ RC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eCoreless digital sub-micro servo\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003e~2.2g\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating voltage\u003c\/span\u003e\u003cstrong\u003e3.6–4.2V (1S)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTorque\u003c\/span\u003e\u003cstrong\u003e~0.11kg·cm (110g·cm) at 4.2V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSpeed\u003c\/span\u003e\u003cstrong\u003e0.06s \/ 60° at 4.2V (0.07s at 3.7V)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating travel\u003c\/span\u003e\u003cstrong\u003e~120°±10° (standard PWM, 900–2100µs)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMechanical limit angle\u003c\/span\u003e\u003cstrong\u003e180° (hard stop — do not force past this)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSpline\u003c\/span\u003e\u003cstrong\u003e20T\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eDead band\u003c\/span\u003e\u003cstrong\u003e5µs\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl\u003c\/span\u003e\u003cstrong\u003ePWM, 1520µs centre (up to 333Hz)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWiring\u003c\/span\u003e\u003cstrong\u003e3-wire: brown GND \/ red V+ \/ orange signal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eDimensions\u003c\/span\u003e\u003cstrong\u003e~16.0 × 8.2 × 14.5mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/AGFRC-C02CLS-Datasheet.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the full AGFRC C02CLS technical datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eAGFRC C02CLS coreless digital micro servo\u003c\/strong\u003e\n\u003cp\u003eSupplied with servo horn(s).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eMicro and park-flyer RC aircraft\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSmall RC helicopters\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLightweight robotics and mechanisms\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eMicro camera and sensor gimbals\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAnimatronic eyes and small props\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino and ESP32 light projects\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect power\u003c\/strong\u003e\u003cp\u003eBrown wire to GND, red wire to a 1S (3.6–4.2V) supply. Do not use 5V.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect signal\u003c\/strong\u003e\u003cp\u003eOrange wire to a PWM pin on your Arduino or ESP32 (3.3V or 5V logic are both fine).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eUse the Servo library\u003c\/strong\u003e\u003cp\u003eOn Arduino use Servo (ESP32Servo on an ESP32); writeMicroseconds() gives fine control over the ~120° operating travel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMind the end stops\u003c\/strong\u003e\u003cp\u003eStandard operating travel is ~120°, but the mechanical limit is 180°. Never hold it stalled against the hard stop, and avoid driving it with extended pulse widths that push past the 180° limit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eCommon questions\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__faqs\"\u003e\n\u003cdetails class=\"nznpd__faq\" open\u003e\n\u003csummary\u003eWhat voltage does it run on?\u003c\/summary\u003e\n\u003cp\u003eIt's a 1S servo: 3.6–4.2V. Don't feed it 5V, that's above its rating and can damage it. Use a single LiPo cell, or a buck converter set to around 4V.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eCan I power it from an Arduino's 5V pin?\u003c\/summary\u003e\n\u003cp\u003eNo, 5V exceeds its 4.2V limit. Power it from a separate 1S (3.6–4.2V) source with a common ground to your controller. The signal wire can still be 3.3V or 5V.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWill it work with Arduino and ESP32?\u003c\/summary\u003e\n\u003cp\u003eYes. It takes a standard PWM signal, use the Servo library on Arduino, or the ESP32Servo library on an ESP32.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eHow much can it move?\u003c\/summary\u003e\n\u003cp\u003eAround 0.11kg·cm of torque. Under standard PWM (900–2100µs) it sweeps ~120°±10° of operating travel. The gear train's hard mechanical stop is 180° — don't drive it past that with extended pulse widths, and don't hold it stalled against the stop.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eHow is it wired?\u003c\/summary\u003e\n\u003cp\u003eStandard 3-wire servo lead: brown is ground, red is positive (the middle wire), and orange is the signal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e This is a 1S servo, always power it from 3.6–4.2V, never 5–6V. Every servo is checked before it ships from our Te Awamutu stock.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42899189203040,"sku":"SRV-AGFRC-C02CLS","price":18.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/AGFRC2gServoProductHero.png?v=1782387317"},{"product_id":"a4988-stepper-motor-driver-module-with-heatsink-2a-bipolar-microstepping-stepstick-3d-printer-cnc-compatible-red","title":"A4988 Stepper Motor Driver Module with Heatsink – 2A Bipolar Microstepping StepStick, 3D Printer \/ CNC Compatible (Red)","description":"\u003cstyle\u003e.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6} .nznpd,.nznpd *{box-sizing:border-box} .nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65} .nznpd strong{color:var(--ink)} .nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6;max-width:none} .nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px} .nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45} .nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center} .nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px} .nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)} .nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px} .nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px} .nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center} .nznpd__steps strong{display:block;font-size:14px} .nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45} .nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)} .nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px} .nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)} .nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden} .nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px} .nznpd__spec:nth-child(odd){background:var(--soft)} .nznpd__spec span{color:var(--mut)} .nznpd__spec strong{font-weight:700} .nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px} .nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center} .nznpd__included strong{display:block;font-size:15px;margin-bottom:3px} .nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px} .nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4} .nznpd__faqs{display:grid;gap:10px} .nznpd__faq{border:2px solid var(--line);border-radius:12px;background:#fff;padding:0 16px;transition:border-color .18s ease} .nznpd__faq[open]{border-color:#FCE0C6} .nznpd__faq summary{list-style:none;cursor:pointer;padding:15px 0;font-weight:700;font-size:14px;color:var(--ink);display:flex;justify-content:space-between;align-items:center;gap:12px} .nznpd__faq summary::-webkit-details-marker{display:none} .nznpd__faq summary::after{content:\"\\203A\";flex:0 0 auto;color:var(--o);font-weight:800;font-size:20px;line-height:1;display:inline-block;transform:rotate(90deg);transition:transform .22s ease} .nznpd__faq[open] summary::after{transform:rotate(-90deg)} .nznpd__faq p{padding:0 0 16px;font-size:14px} .nznpd__faq[open] p{animation:nznpdReveal .24s ease} @keyframes nznpdReveal{from{opacity:0;transform:translateY(-5px)}to{opacity:1;transform:translateY(0)}} .nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55} @media (prefers-reduced-motion:reduce){.nznpd__faq summary::after{transition:none}.nznpd__faq[open] p{animation:none}} @media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}}\u003c\/style\u003e\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThe A4988 is a complete microstepping driver for bipolar stepper motors, built around the Allegro A4988 chip on the standard StepStick footprint used by RAMPS, CNC shields and most 3D printer controllers. A simple STEP and DIR interface handles motion, an onboard trimpot sets the current limit, and five resolution modes take you from full step down to smooth 1\/16 microstepping. Each board ships with a self-adhesive heatsink and pre-soldered headers, ready to drop in.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eDrives one bipolar stepper (NEMA 17, NEMA 14 and similar)\u003c\/li\u003e\n\u003cli\u003eUp to 2A per phase with the heatsink fitted and airflow\u003c\/li\u003e\n\u003cli\u003eFull, 1\/2, 1\/4, 1\/8 and 1\/16 microstepping via MS1\/MS2\/MS3\u003c\/li\u003e\n\u003cli\u003eSimple STEP \/ DIR control from any microcontroller\u003c\/li\u003e\n\u003cli\u003eAdjustable current limit through the onboard trimpot (VREF)\u003c\/li\u003e\n\u003cli\u003e8-35V motor supply, 3-5.5V logic supply\u003c\/li\u003e\n\u003cli\u003eBuilt-in over-temperature, over-current and short protection\u003c\/li\u003e\n\u003cli\u003eHeatsink and pre-soldered headers included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eDriver IC\u003c\/span\u003e\u003cstrong\u003eAllegro A4988 DMOS microstepping driver\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor type\u003c\/span\u003e\u003cstrong\u003eBipolar stepper (4-wire)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor supply (VMOT)\u003c\/span\u003e\u003cstrong\u003e8-35V DC\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLogic supply (VDD)\u003c\/span\u003e\u003cstrong\u003e3-5.5V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMax current per phase\u003c\/span\u003e\u003cstrong\u003e1A continuous without extra cooling, up to 2A with the heatsink and airflow\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMicrostep modes\u003c\/span\u003e\u003cstrong\u003eFull, 1\/2, 1\/4, 1\/8, 1\/16 step\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl interface\u003c\/span\u003e\u003cstrong\u003eSTEP and DIR logic inputs\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCurrent limit\u003c\/span\u003e\u003cstrong\u003eAdjustable via onboard trimpot (VREF)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eProtections\u003c\/span\u003e\u003cstrong\u003eOver-temperature, over-current, short-to-ground and under-voltage lockout\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard size\u003c\/span\u003e\u003cstrong\u003e15.5 x 20.5mm (standard StepStick footprint)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHeaders\u003c\/span\u003e\u003cstrong\u003ePre-soldered, breadboard and socket friendly\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCooling\u003c\/span\u003e\u003cstrong\u003eSelf-adhesive heatsink included\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePCB colour\u003c\/span\u003e\u003cstrong\u003eRed\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1x\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eA4988 Stepper Driver + Heatsink\u003c\/strong\u003e\u003cp\u003eOne A4988 driver module with pre-soldered headers and one self-adhesive aluminium heatsink. Stepper motor and controller board sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRAMPS 1.4 and 3D printer control boards\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCNC shields and GRBL machines\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino and Raspberry Pi stepper projects\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCamera sliders and motorised rigs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRobotics and automation builds\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eReplacing a failed or noisy driver\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eGetting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eWire the power and motor\u003c\/strong\u003e\u003cp\u003eConnect your motor supply (8-35V) to VMOT\/GND and your stepper's two coils to 1A\/1B and 2A\/2B. Always fit the 100uF bypass capacitor recommended for your supply.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect logic and control\u003c\/strong\u003e\u003cp\u003eFeed VDD\/GND from your 5V logic and drive STEP and DIR from your microcontroller or control board. Set MS1\/MS2\/MS3 to pick the microstep resolution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSet the current limit\u003c\/strong\u003e\u003cp\u003eMeasure VREF at the trimpot and adjust it to match your motor's rated current before running under load. This is the single most important step for cool, reliable operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStick on the heatsink\u003c\/strong\u003e\u003cp\u003ePeel and press the included heatsink onto the A4988 chip so it can run harder without thermal shutdown.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eCommon questions\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__faqs\"\u003e\n\u003cdetails class=\"nznpd__faq\" open\u003e\u003csummary\u003eDoes it come with a heatsink?\u003c\/summary\u003e\u003cp\u003eYes. Every board ships with a self-adhesive aluminium heatsink and pre-soldered headers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eHow much current can it really handle?\u003c\/summary\u003e\u003cp\u003eAbout 1A per phase with no extra cooling, and up to 2A per phase with the heatsink fitted and some airflow. Always set the VREF current limit to your motor, not the maximum.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eIs it compatible with RAMPS and CNC shields?\u003c\/summary\u003e\u003cp\u003eYes. It uses the standard StepStick pin layout, so it drops straight into RAMPS 1.4, CNC shields, and most 3D printer and GRBL control boards.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eWhat is the difference between the A4988 and DRV8825?\u003c\/summary\u003e\u003cp\u003eThe A4988 does up to 1\/16 microstepping and around 1-2A per phase, while the DRV8825 pushes higher voltage and current with up to 1\/32 microstepping. The A4988 is the classic, well-supported choice for most 3D printers and light-to-medium steppers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eCan it run a unipolar motor like the 28BYJ-48?\u003c\/summary\u003e\u003cp\u003eNo. The A4988 is for bipolar (4-wire) steppers such as NEMA 17. Small unipolar motors like the 28BYJ-48 use a different driver such as the ULN2003.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eDo I need a capacitor across the motor supply?\u003c\/summary\u003e\u003cp\u003eYes, it is strongly recommended. Fit an electrolytic capacitor (typically 100uF) across VMOT and GND to protect the driver from voltage spikes when the motor moves.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e Set the VREF current limit before running your motor under load, and never connect or disconnect a stepper while the driver is powered, as this can destroy the board. Every driver is checked before it ships from our Te Awamutu stock.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42962418139232,"sku":"A4988-DRV-HS","price":4.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/A4988-Hero.png?v=1784342463"},{"product_id":"sg92r-micro-servo-9g-arduino-rc-nz","title":"SG92R Micro Servo 9g | Carbon Fibre Gears, 90° Travel | Arduino RC","description":"\u003cdiv class=\"nznpd\"\u003e\n  \u003cp class=\"nznpd__intro\"\u003eThe SG92R is a 9.2 g positional servo for robot arms, steering, pan and tilt rigs, and other small mechanisms. It shares the SG90's body, mounting holes and 3-wire connection, but uses carbon-fibre reinforced nylon gears and produces about 2.2 to 2.5 kgf·cm of stall torque at 4.8 V. Its useful travel is a 90° arc, controlled with the Arduino Servo library.\u003c\/p\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__pick\"\u003e\n      \u003cdiv class=\"nznpd__pick-card\"\u003e\n        \u003ch4\u003eSG92R: Reinforced positional servo\u003c\/h4\u003e\n        \u003cp\u003eChoose the SG92R when a small mechanism needs the SG90 footprint with reinforced gears and more torque. It holds a commanded position across a 90° arc.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"nznpd__pick-card\"\u003e\n        \u003ch4\u003eSG90: Standard plastic-gear servo\u003c\/h4\u003e\n        \u003cp\u003eThe SG90 suits lighter or occasional work and is available in 90°, 180° and 360° versions. \u003ca href=\"\/products\/tower-pro-sg90-9g-micro-servo-motor-arduino-rc-nz\"\u003eView the SG90 options\u003c\/a\u003e.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"nznpd__pick-card\"\u003e\n        \u003ch4\u003eMG90S: Metal-gear servo\u003c\/h4\u003e\n        \u003cp\u003eChoose the MG90S when your project specifically requires metal gears. It is available in 180° positional and 360° continuous versions. \u003ca href=\"\/products\/mg90s-servo\"\u003eView the MG90S options\u003c\/a\u003e.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"nznpd__subhead\"\u003eTechnical details\u003c\/div\u003e\n    \u003cdiv class=\"nznpd__specs\"\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eSG92R micro servo\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eServo type\u003c\/span\u003e\u003cstrong\u003ePositional\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTravel\u003c\/span\u003e\u003cstrong\u003e90° total\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating voltage\u003c\/span\u003e\u003cstrong\u003e4.8 to 6 V DC\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl signal\u003c\/span\u003e\u003cstrong\u003e50 Hz pulse-width modulation, 3-wire\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnector\u003c\/span\u003e\u003cstrong\u003e3-pin JR \/ Futaba style\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eArduino command range\u003c\/span\u003e\u003cstrong\u003eUsually \u003ccode class=\"nznpd__code\"\u003ewrite(90)\u003c\/code\u003e to \u003ccode class=\"nznpd__code\"\u003ewrite(180)\u003c\/code\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSpeed\u003c\/span\u003e\u003cstrong\u003eAbout 0.1 s per 60°\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStall torque\u003c\/span\u003e\u003cstrong\u003eAbout 2.2 to 2.5 kgf·cm at 4.8 V\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eGear material\u003c\/span\u003e\u003cstrong\u003eCarbon-fibre reinforced nylon, not metal\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody size\u003c\/span\u003e\u003cstrong\u003e23.0 × 12.0 × 22.8 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting span\u003c\/span\u003e\u003cstrong\u003e32.2 mm across the tabs\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003eAbout 9.2 g\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire colours\u003c\/span\u003e\u003cstrong\u003eBrown GND, red V+, orange signal\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLead length\u003c\/span\u003e\u003cstrong\u003eAbout 25 cm\u003c\/strong\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__included\"\u003e\n      \u003cspan class=\"nznpd__qty\"\u003e1×\u003c\/span\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eSG92R micro servo\u003c\/strong\u003e\u003cp\u003eIncludes 3 servo horn arms and mounting screws.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__uses\"\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eRobot arms and grippers\u003c\/strong\u003e\u003cp\u003ePosition small linkages with more torque than the standard SG90.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003ePan and tilt rigs\u003c\/strong\u003e\u003cp\u003eControl a camera or sensor through a short repeatable arc.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eSteering and control surfaces\u003c\/strong\u003e\u003cp\u003eUse the reinforced gear train in small RC and mobile projects.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eWalking robots\u003c\/strong\u003e\u003cp\u003eDrive compact joints where plastic SG90 gears wear too quickly.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eLatches and levers\u003c\/strong\u003e\u003cp\u003eHold a repeatable position without continuous rotation.\u003c\/p\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eArduino and STEM projects\u003c\/strong\u003e\u003cp\u003eBuild compact mechanisms with standard servo control.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003cdiv class=\"nznpd__qs\"\u003e\n      \u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n      \u003col class=\"nznpd__steps\"\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the 3 wires\u003c\/strong\u003e\u003cp\u003eBrown goes to GND, red to a regulated 4.8 to 6 V supply, and orange to the controller's signal pin.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eShare the ground\u003c\/strong\u003e\u003cp\u003eIf the servo has a separate supply, connect its ground to the Arduino, ESP32 or receiver ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStart inside the useful range\u003c\/strong\u003e\u003cp\u003eUse \u003ccode\u003ewrite(90)\u003c\/code\u003e to \u003ccode\u003ewrite(180)\u003c\/code\u003e as the starting range. Test the end points without a load and stop if the servo buzzes against a mechanical limit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFit the horn after testing\u003c\/strong\u003e\u003cp\u003eMove the servo near the middle of its useful range before attaching the horn, then check that the linkage can travel without binding.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eAllow enough current\u003c\/strong\u003e\u003cp\u003eOne unloaded servo can be tested from a development board's 5 V pin. For a loaded servo or several servos, use a separate regulated supply with a common ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n      \u003c\/ol\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\r\n","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42999009509472,"sku":"SRV-SG92R-9G-90","price":4.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/SG92R-Servo-Hero_e701972c-af0e-4dda-9693-e68de85220f8.jpg?v=1785142540"},{"product_id":"atd5833-stepper-motor-driver-module-heatsink","title":"ATD5833 Stepper Motor Driver Module with Heatsink","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA compact ATD5833 module for low-noise bipolar stepper control in 3D printers, CNC machines and motion projects. It supports conventional STEP\/DIR control or UART configuration, works with 3.3 V or 5 V logic, and includes a blue aluminium heatsink for the reverse-side thermal area.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eController\u003c\/span\u003e\u003cstrong\u003eATD5833\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor type\u003c\/span\u003e\u003cstrong\u003e2-phase bipolar stepper\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor supply\u003c\/span\u003e\u003cstrong\u003e5 V to 36 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLogic supply\u003c\/span\u003e\u003cstrong\u003e3.3 V or 5 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl modes\u003c\/span\u003e\u003cstrong\u003eSTEP\/DIR or UART\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaximum output\u003c\/span\u003e\u003cstrong\u003e2.5 A peak\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRecommended current\u003c\/span\u003e\u003cstrong\u003eUp to 2 A with suitable cooling\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMicrostepping\u003c\/span\u003e\u003cstrong\u003eUp to 256 subdivisions\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStandalone selection\u003c\/span\u003e\u003cstrong\u003eFull, 1\/2, 1\/4 or 1\/16 step\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHeader format\u003c\/span\u003e\u003cstrong\u003e2 × 8 pins, 2.54 mm pitch\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard size\u003c\/span\u003e\u003cstrong\u003e20.50 × 15.0 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003e7.0 g with heatsink\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/ATD5833-Datasheet-v3.pdf?v=1787993546\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the ATD5833 technical datasheet PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/ATD5833-QuickStart_a3138b81-77de-4856-930d-5365069c2f9e.pdf?v=1787994020\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the ATD5833 quick start guide PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eQuick Start guide\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eATD5833 driver module\u003c\/strong\u003e\u003cp\u003eBlack board with both header rows soldered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eBlue aluminium heatsink\u003c\/strong\u003e\u003cp\u003eSupplied loose with a thermal adhesive pad for the reverse-side gold area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003e3D printer stepper control\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCNC and laser motion\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRobotics\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCompact automation projects\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSwitch off every supply\u003c\/strong\u003e\u003cp\u003eDisconnect motor power, logic power and USB before inserting or wiring the module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMatch every pin label\u003c\/strong\u003e\u003cp\u003eConfirm VM, GND, VIO, DIR, STEP and EN against the carrier board. Do not rely on the board outline alone.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the motor phases\u003c\/strong\u003e\u003cp\u003eConnect one winding to M1A and M1B, and the other winding to M2A and M2B.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFit the heatsink correctly\u003c\/strong\u003e\u003cp\u003eRemove the protective film and place the flat adhesive base on the large gold thermal area on the reverse of the board.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eChoose the control mode\u003c\/strong\u003e\u003cp\u003eSet the carrier-board jumpers and firmware for standalone STEP\/DIR or UART operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStart conservatively\u003c\/strong\u003e\u003cp\u003eBegin at a low current setting, make a short slow move, then check motor direction and driver temperature.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Never connect or disconnect motor windings while VM is powered. The 2.5 A figure is a supplier-stated peak maximum, not a continuous no-cooling target. Actual current capability depends on heatsink contact, airflow and the assembled machine.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":43107742974048,"sku":"MOD-ATD5833","price":7.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-atd5833-hero-component-side_b044a489-4cdd-4ed0-8b95-e2f75c1a516b.png?v=1787991522"},{"product_id":"tmc2208-stepper-motor-driver-module-heatsink","title":"TMC2208 Stepper Motor Driver Module with Heatsink","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA compact TMC2208 module for quiet bipolar stepper control in 3D printers, CNC machines and motion projects. It supports conventional STEP\/DIR control or UART configuration, works with 3.3 V or 5 V logic, and includes a blue aluminium heatsink for the reverse-side thermal area.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eController\u003c\/span\u003e\u003cstrong\u003eTMC2208-LA\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor type\u003c\/span\u003e\u003cstrong\u003e2-phase bipolar stepper\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMotor supply\u003c\/span\u003e\u003cstrong\u003e5 V to 36 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLogic supply\u003c\/span\u003e\u003cstrong\u003e3.3 V or 5 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eControl modes\u003c\/span\u003e\u003cstrong\u003eSTEP\/DIR or UART\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaximum output\u003c\/span\u003e\u003cstrong\u003e1.4 A\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRecommended current\u003c\/span\u003e\u003cstrong\u003eUp to 1.2 A with suitable cooling\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMicrostep interpolation\u003c\/span\u003e\u003cstrong\u003eUp to 256 microsteps\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStandalone selection\u003c\/span\u003e\u003cstrong\u003e1\/2, 1\/4, 1\/8 or 1\/16 step\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHeader format\u003c\/span\u003e\u003cstrong\u003e2 × 8 pins, 2.54 mm pitch\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard size\u003c\/span\u003e\u003cstrong\u003e20.5 × 15.0 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003eApprox. 7 g with heatsink\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TMC2208-Datasheet-v3.pdf?v=1788054040\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the TMC2208 technical datasheet PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TMC2208-QuickStart.pdf?v=1788054039\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the TMC2208 quick start guide PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eQuick Start guide\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTMC2208 driver module\u003c\/strong\u003e\u003cp\u003eBlack board with both header rows soldered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eBlue aluminium heatsink\u003c\/strong\u003e\u003cp\u003eSupplied loose with a thermal adhesive pad for the reverse-side gold area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eQuiet 3D printer motion\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCNC and laser motion\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRobotics\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCompact automation projects\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSwitch off every supply\u003c\/strong\u003e\u003cp\u003eDisconnect motor power, logic power and USB before inserting or wiring the module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMatch every pin label\u003c\/strong\u003e\u003cp\u003eConfirm VM, GND, VIO, DIR, STEP and EN against the carrier board. Do not rely on the board outline alone.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the motor phases\u003c\/strong\u003e\u003cp\u003eConnect one winding to M1A and M1B, and the other winding to M2A and M2B.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFit the heatsink correctly\u003c\/strong\u003e\u003cp\u003eRemove the protective film and place the flat adhesive base on the large gold thermal area on the reverse of the board.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eChoose the control mode\u003c\/strong\u003e\u003cp\u003eSet the carrier-board jumpers and firmware for standalone STEP\/DIR or UART operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStart conservatively\u003c\/strong\u003e\u003cp\u003eBegin at a low current setting, make a short slow move, then check motor direction and driver temperature.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Never connect or disconnect motor windings while VM is powered. The module supplier states a 1.4 A maximum and recommends no more than 1.2 A with suitable cooling. Actual current capability depends on heatsink contact, airflow and the assembled machine.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":43109155176544,"sku":"MOD-TMC2208-1PK","price":7.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-tmc2208-hero-component-side.png?v=1788052463"},{"product_id":"150mm-futaba-servo-y-cable-splitter","title":"150mm Futaba-Style Servo Y Cable - 1 to 2 Splitter","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThis 150 mm Futaba-style servo Y cable connects two compatible servo leads to one receiver or controller channel. The passive 1-to-2 harness carries the same power, ground and control signal to both branches through 22 AWG, three-conductor wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHarness type\u003c\/span\u003e\u003cstrong\u003ePassive 1-to-2 servo Y cable\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnector style\u003c\/span\u003e\u003cstrong\u003eFutaba-style, 3-position keyed housings\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnector layout\u003c\/span\u003e\u003cstrong\u003e1 plug to 2 sockets\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eNominal length\u003c\/span\u003e\u003cstrong\u003e150 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConductor size\u003c\/span\u003e\u003cstrong\u003e22 AWG, supplier-listed\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStrand construction\u003c\/span\u003e\u003cstrong\u003e60 x 0.08 mm, supplier-listed\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eVisible wire colours\u003c\/span\u003e\u003cstrong\u003eWhite, red and black\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCable form\u003c\/span\u003e\u003cstrong\u003eTwisted three-conductor branches\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSplit protection\u003c\/span\u003e\u003cstrong\u003eBlack heat-shrink sleeve\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/CBL-SERVO-Y-FUT-150-Datasheet-v1.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open the 150 mm keyed servo Y cable technical datasheet PDF in a new tab\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"1.8\" stroke-linecap=\"round\" stroke-linejoin=\"round\" aria-hidden=\"true\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpath d=\"M14 2v6h6\"\u003e\u003c\/path\u003e\u003cpath d=\"M12 18v-6\"\u003e\u003c\/path\u003e\u003cpath d=\"m9 15 3 3 3-3\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cspan\u003eServo Y cable technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1 x\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e150 mm Futaba-style servo Y cable\u003c\/strong\u003e\u003cp\u003eOne complete 1-to-2 harness with one keyed plug and two keyed sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eDual aileron or flap servos\u003c\/strong\u003e\u003cp\u003eDrive two compatible servos from the same receiver command.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eRC repairs and rewiring\u003c\/strong\u003e\u003cp\u003eReplace or tidy a short two-servo harness in an aircraft, car or boat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eRobotics projects\u003c\/strong\u003e\u003cp\u003eShare one controller signal where two compatible servos should move together.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSwitch power off\u003c\/strong\u003e\u003cp\u003eDisconnect the receiver or controller supply before fitting or removing the harness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMatch the connector orientation\u003c\/strong\u003e\u003cp\u003eAlign the keyed housings and confirm the connected leads follow the same signal, positive and ground order.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect both servo leads\u003c\/strong\u003e\u003cp\u003eSeat each lead fully. Both outputs receive the same control signal, so this cable does not provide independent control or reverse one servo.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck the combined load\u003c\/strong\u003e\u003cp\u003eAdd the peak current required by both servos and keep it within the receiver channel, BEC, wiring and power-source limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSecure the harness\u003c\/strong\u003e\u003cp\u003eLeave enough slack for movement and protect the connectors from vibration, sharp edges and linkage strain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":43161570476128,"sku":"CBL-SERVO-Y-FUT-150","price":4.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-150mm-futaba-servo-y-cable-hero.png?v=1789869319"}],"url":"https:\/\/www.nznelectronics.co.nz\/collections\/motors.oembed","provider":"NZN Electronics","version":"1.0","type":"link"}