{"title":"Power \u0026 Wiring","description":"\u003cp\u003eCrimp terminals, ferrules, lever connectors, cable glands, power connectors and power modules for electrical and electronics builds.\u003c\/p\u003e","products":[{"product_id":"ip67-waterproof-buck-converter-12v-24v-to-5v-3a","title":"IP67 Waterproof DC-DC Buck Converter 12V\/24V to 5V 3A or 5A","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThis waterproof buck converter steps a 12V or 24V supply down to a stable, regulated 5V. The board is potted inside a sealed IP67 aluminium housing, so it keeps a clean 5V rail running in damp, dusty and high-vibration spots where a bare module wouldn't last, such as vehicles, boats, solar setups and 3D-printer enclosures. It comes in two ratings in the same small housing: 3A (15W), enough for a Raspberry Pi 4 with a display and webcam, or 5A (25W) for a Raspberry Pi 5 or heavier 5V loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eManufacturer model\u003c\/span\u003e\u003cstrong\u003eXWST XW-1224-5V series\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModule type\u003c\/span\u003e\u003cstrong\u003eNon-isolated step-down (buck)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInput voltage\u003c\/span\u003e\u003cstrong\u003e12-24V DC\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput voltage\u003c\/span\u003e\u003cstrong\u003e5V DC (regulated)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput current\u003c\/span\u003e\u003cstrong\u003e3A or 5A, choose above\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput power\u003c\/span\u003e\u003cstrong\u003e15W (3A) or 25W (5A)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConversion efficiency\u003c\/span\u003e\u003cstrong\u003eOver 93% (3A version)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput ripple (full load)\u003c\/span\u003e\u003cstrong\u003e140mV (3A version)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eNo-load current\u003c\/span\u003e\u003cstrong\u003e2.5mA (3A version)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eProtection\u003c\/span\u003e\u003cstrong\u003eOver-current, over-voltage, over-heat, short circuit\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWaterproof rating\u003c\/span\u003e\u003cstrong\u003eIP67 (fully potted)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing\u003c\/span\u003e\u003cstrong\u003eAluminium alloy, doubles as the heatsink\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody dimensions\u003c\/span\u003e\u003cstrong\u003e44 × 25 × 20.5mm (both versions)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting\u003c\/span\u003e\u003cstrong\u003e2 × Ø4mm holes, 51mm apart\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCable length\u003c\/span\u003e\u003cstrong\u003e13-14cm leads (3A version)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating temperature\u003c\/span\u003e\u003cstrong\u003e-40°C to +80°C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003e45g\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWarranty\u003c\/span\u003e\u003cstrong\u003e12 months\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/XWST-3A-Datasheet.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the XWST 3A datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003e3A datasheet \u003cspan class=\"lo\"\u003e· 15W\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eIP67 waterproof buck converter, 3A (15W) or 5A (25W) as selected\u003c\/strong\u003e\n\u003cp\u003eSupplied with pre-attached input and output flying leads, ready to wire in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003e3D printing - power a Raspberry Pi Klipper host from a 12\/24V PSU\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRaspberry Pi 5 projects from a 12V or 24V supply (5A version)\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCamper, caravan and boat 12V systems needing 5V\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSolar battery banks - clean 5V from a 12V or 24V supply\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino, ESP32 and microcontrollers from an existing 12V line\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomotive 12V device power and IoT nodes needing permanent 5V\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eIdentify the leads\u003c\/strong\u003e\u003cp\u003eRed is input positive, black is input ground (the input pair). Yellow is the 5V output positive, with a black output ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the input\u003c\/strong\u003e\u003cp\u003eRed and black input leads to your 12-24V supply, through an inline fuse. Mind polarity, as the input is not reverse-polarity protected.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the output\u003c\/strong\u003e\u003cp\u003eYellow and black output leads to your 5V device. Input and output share a common ground inside the module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSeal the joints\u003c\/strong\u003e\u003cp\u003eHeatshrink or use sealed crimps so the connections are as weatherproof as the converter, keeping the IP67 rating end-to-end.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Running continuously near the rated current shortens lifespan, so leave headroom and derate above 40°C ambient. For the input fuse, about 3A suits the 3A version and about 5A suits the 5A version on a 12V supply.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"XWST","offers":[{"title":"3A","offer_id":42678133751904,"sku":"XWST-BUCK-12-24-5V-3A","price":15.99,"currency_code":"NZD","in_stock":true},{"title":"5A","offer_id":50528699842656,"sku":"XWST-BUCK-12-24-5V-5A","price":18.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/xwst-ip67-buck-converter-3a-hero-pure-white-protected-2026-08-31.png?v=1788093644"},{"product_id":"wago-style-lever-wire-connectors","title":"WAGO-Style Lever Wire Connectors 2, 3 \u0026 5 Pole, 32A 450V","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__note\" style=\"margin-top:0\"\u003e\u003cstrong\u003eDiscontinued unbranded range.\u003c\/strong\u003e These WAGO-style connectors are brand new and carry our standard 12-month warranty. For genuine WAGO parts, see the \u003ca href=\"\/products\/wago-221-412-2-wire-lever-connector-32a-450v\"\u003e221-412\u003c\/a\u003e, \u003ca href=\"\/products\/wago-221-413-3-wire-lever-connector-32a-450v\"\u003e221-413\u003c\/a\u003e and \u003ca href=\"\/products\/wago-221-415-5-wire-lever-connector-32a-450v\"\u003e221-415\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp class=\"nznpd__intro\"\u003eLever nut connectors splice wires in seconds with no twisting, no wire nuts and no tools. A flip-up lever on each port clamps solid, stranded or fine-stranded wire from 0.2 to 4mm², rated 32A at 450V, and opens again whenever you need to re-wire. Pick 2 pole to join two wires, 3 pole for three or 5 pole for five. Sold individually, so buy the count your job needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eLever nut splicing connector\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePoles available\u003c\/span\u003e\u003cstrong\u003e2, 3 and 5\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCurrent rating\u003c\/span\u003e\u003cstrong\u003e32A\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eVoltage rating\u003c\/span\u003e\u003cstrong\u003e450V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire, solid and stranded\u003c\/span\u003e\u003cstrong\u003e0.2 to 4mm² (24 to 12 AWG)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire, fine stranded\u003c\/span\u003e\u003cstrong\u003e0.14 to 4mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStrip length\u003c\/span\u003e\u003cstrong\u003e11mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eActuation\u003c\/span\u003e\u003cstrong\u003eTool free lever, no crimping\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eReusable\u003c\/span\u003e\u003cstrong\u003eYes, open and re-wire any time\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing\u003c\/span\u003e\u003cstrong\u003eTransparent polycarbonate\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating temperature\u003c\/span\u003e\u003cstrong\u003eUp to 85°C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eSingle connector\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLever connector in your chosen pole count\u003c\/strong\u003e\u003cp\u003e2, 3 or 5 pole, sold individually. Add the quantity your project needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLighting and downlight wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED strip and sign connections\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eJunction box splices and branches\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAppliance and fixture repairs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCaravan, boat and 12V accessory wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBench testing and temporary joins\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the wire\u003c\/strong\u003e\u003cp\u003eTake about 11mm of insulation off each conductor.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eLift the lever\u003c\/strong\u003e\u003cp\u003eFlip the lever fully up to open the port.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eInsert and close\u003c\/strong\u003e\u003cp\u003ePush the wire all the way in, then press the lever back down to clamp it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck through the housing\u003c\/strong\u003e\u003cp\u003eThe clear body lets you confirm the copper is seated past the clamp. To re-wire, lift the lever again.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e These are unbranded WAGO-style connectors, not a WAGO product. Mains wiring in New Zealand must be carried out or certified by a registered electrician.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"2 Pole","offer_id":42669841154144,"sku":"WAGO-STYLE-2P","price":1.1,"currency_code":"NZD","in_stock":true},{"title":"3 Pole","offer_id":42669841186912,"sku":"WAGO-221-3P","price":1.99,"currency_code":"NZD","in_stock":true},{"title":"5 Pole","offer_id":43078482919520,"sku":"WAGO-STYLE-5P","price":2.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/IMG_4058_da735f49-3598-4307-a71e-7879970ec901.jpg?v=1775864754"},{"product_id":"iec320-c14-panel-mount-inlet-10a-250v","title":"IEC C14 Panel Mount Power Inlet 10A 250V","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA three-pole IEC 60320 C14 appliance inlet for fitting a removable C13 mains lead to an equipment enclosure. The current NZN stock is marked AC-04 and 10A 250V AC, with a two-hole screw flange and rear solder tabs.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnector form\u003c\/span\u003e\u003cstrong\u003eIEC 60320 C14 inlet\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMating connector\u003c\/span\u003e\u003cstrong\u003eIEC C13 female\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eNumber of poles\u003c\/span\u003e\u003cstrong\u003e3: L, N and earth\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStock marking\u003c\/span\u003e\u003cstrong\u003e10A 250V AC\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting style\u003c\/span\u003e\u003cstrong\u003eTwo-hole panel flange\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRear termination\u003c\/span\u003e\u003cstrong\u003eTabs with solder holes\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel marking\u003c\/span\u003e\u003cstrong\u003eAC-04\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody colour\u003c\/span\u003e\u003cstrong\u003eBlack\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTerminal labels\u003c\/span\u003e\u003cstrong\u003eL, N and earth\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eObserved marks\u003c\/span\u003e\u003cstrong\u003eCE and CCC\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting screws\u003c\/span\u003e\u003cstrong\u003eNot included\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePower lead\u003c\/span\u003e\u003cstrong\u003eNot included\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/IEC-C14-Panel-Inlet-Datasheet-v2.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the IEC C14 panel mount inlet datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eIEC C14 panel mount inlet\u003c\/strong\u003e\u003cp\u003eMounting screws and the C13 power lead are not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eEquipment enclosures\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e3D printer control boxes\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBench power projects\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003ePSU and amplifier housings\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eMatching inlet repairs\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConfirm the part\u003c\/strong\u003e\u003cp\u003eCheck the AC-04 and 10A 250V AC stock markings before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eDesign the enclosure\u003c\/strong\u003e\u003cp\u003eProvide secure mounting, insulation, clearances and cable strain relief appropriate to the finished equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eProtect the circuit\u003c\/strong\u003e\u003cp\u003eSelect wiring and over-current protection for the complete assembly, not from the connector marking alone.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eInspect and test\u003c\/strong\u003e\u003cp\u003eInstallation and testing must be completed by a suitably qualified person in accordance with applicable New Zealand electrical requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42686056988768,"sku":"NZE-C14-I","price":2.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-c14-panel-inlet-hero-three-quarter.png?v=1788222135"},{"product_id":"tp4056-usb-c-lithium-battery-charging-module-5v-1a-18650-protection","title":"TP4056 USB-C Lithium Battery Charging Module – 5V 1A, 18650 Protection","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA USB-C charging and protection module for one 3.7 V nominal Li-ion or LiPo cell. The HW-373 V1.0 board charges at up to a nominal 1 A and provides a protected output that follows the cell voltage.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard version\u003c\/span\u003e\u003cstrong\u003eHW-373 V1.0\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBattery\u003c\/span\u003e\u003cstrong\u003eOne 1S Li-ion or LiPo cell, 3.7 V nominal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInput\u003c\/span\u003e\u003cstrong\u003e5 V DC nominal via USB-C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCharge method\u003c\/span\u003e\u003cstrong\u003eLinear constant-current \/ constant-voltage\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eNominal charge current\u003c\/span\u003e\u003cstrong\u003e1 A as supplied, with thermal regulation\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCharge voltage\u003c\/span\u003e\u003cstrong\u003e4.2 V, +\/-1% controller value\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePrecharge\u003c\/span\u003e\u003cstrong\u003eReduced current below about 2.9 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTermination\u003c\/span\u003e\u003cstrong\u003eNear 1\/10 of the programmed charge current\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput\u003c\/span\u003e\u003cstrong\u003eProtected raw-cell voltage, not regulated 5 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eProtection stage\u003c\/span\u003e\u003cstrong\u003eDW01A controller with 8205A dual MOSFET\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eIndicators\u003c\/span\u003e\u003cstrong\u003eRed charging, blue standby or full on this board version\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eDimensions\u003c\/span\u003e\u003cstrong\u003eApprox. 28 x 17 x 5.6 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\" id=\"quick-start-guide\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TP4056-USBC-Datasheet-Rev2.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the TP4056 USB-C module technical datasheet PDF\"\u003e\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TP4056-USBC-QuickStart-Rev2.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the TP4056 USB-C module quick start guide PDF\"\u003e\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\u003cspan\u003eQuick Start guide\u003c\/span\u003e\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1x\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTP4056 USB-C charger and protection module\u003c\/strong\u003e\u003cp\u003eOne module per unit ordered.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRechargeable 1S lithium projects\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eProtected 18650 holders and portable builds\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino and ESP32 battery-powered projects\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAdding USB-C charging to a suitable enclosure\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConfirm the cell\u003c\/strong\u003e\u003cp\u003eUse one healthy 4.2 V Li-ion or LiPo cell whose charging specification permits the board's nominal 1 A current.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck the pad order\u003c\/strong\u003e\u003cp\u003eWith the component side up and USB-C at the left, the right-edge pads are OUT+, B+, B-, OUT- from top to bottom.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the battery\u003c\/strong\u003e\u003cp\u003eWith USB unplugged, connect battery positive to B+ and negative to B-. Reverse polarity is not protected.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eRun a first-power-up test\u003c\/strong\u003e\u003cp\u003eLeave the project disconnected, apply 5 V by USB-C, and check for a red charging indicator or blue standby indicator.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect the load\u003c\/strong\u003e\u003cp\u003eUse OUT+ and OUT-. The output follows the cell voltage and is not a regulated 5 V rail.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This board has no separate load-sharing stage. A running load can delay or prevent normal charge termination, so switch the project off while charging when reliable termination matters. Never charge a damaged lithium cell or leave charging unattended.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42880243826784,"sku":"PWR-TP4056-USBC","price":1.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/TypeCTP4056ProductHero.png?v=1781687938"},{"product_id":"18650-battery-holder-solder-pins-1-2-slot","title":"18650 Battery Holder Case with Solder Pins – 1 \u0026 2 Slot, PCB Mount (ABS)","description":"\u003cstyle\u003e.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6} .nznpd,.nznpd *{box-sizing:border-box} .nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65} .nznpd strong{color:var(--ink)} .nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6;max-width:none} .nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px} .nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45} .nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center} .nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px} .nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)} .nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px} .nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px} .nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center} .nznpd__steps strong{display:block;font-size:14px} .nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45} .nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)} .nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px} .nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)} .nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden} .nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px} .nznpd__spec:nth-child(odd){background:var(--soft)} .nznpd__spec span{color:var(--mut)} .nznpd__spec strong{font-weight:700} .nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px} .nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center} .nznpd__included strong{display:block;font-size:15px;margin-bottom:3px} .nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px} .nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4} .nznpd__faqs{display:grid;gap:10px} .nznpd__faq{border:2px solid var(--line);border-radius:12px;background:#fff;padding:0 16px;transition:border-color .18s ease} .nznpd__faq[open]{border-color:#FCE0C6} .nznpd__faq summary{list-style:none;cursor:pointer;padding:15px 0;font-weight:700;font-size:14px;color:var(--ink);display:flex;justify-content:space-between;align-items:center;gap:12px} .nznpd__faq summary::-webkit-details-marker{display:none} .nznpd__faq summary::after{content:\"\\203A\";flex:0 0 auto;color:var(--o);font-weight:800;font-size:20px;line-height:1;display:inline-block;transform:rotate(90deg);transition:transform .22s ease} .nznpd__faq[open] summary::after{transform:rotate(-90deg)} .nznpd__faq p{padding:0 0 16px;font-size:14px} .nznpd__faq[open] p{animation:nznpdReveal .24s ease} @keyframes nznpdReveal{from{opacity:0;transform:translateY(-5px)}to{opacity:1;transform:translateY(0)}} .nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55} @media (prefers-reduced-motion:reduce){.nznpd__faq summary::after{transition:none}.nznpd__faq[open] p{animation:none}} @media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}}\u003c\/style\u003e\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eKeep your 18650 cells organised and project-ready. These rugged \u003cstrong\u003eABS battery holders\u003c\/strong\u003e use \u003cstrong\u003ebare solder pins\u003c\/strong\u003e that mount straight onto a PCB or perfboard — no wire leads to trim back — so they're ideal for clean, permanent DIY builds. The \u003cstrong\u003e1-slot\u003c\/strong\u003e brings out 2 pins for a single cell (3.7V). The \u003cstrong\u003e2-slot\u003c\/strong\u003e gives you 4 independent pins, so you can wire its two cells in \u003cstrong\u003eparallel\u003c\/strong\u003e (3.7V, double the capacity) or in \u003cstrong\u003eseries\u003c\/strong\u003e (7.4V). Bare pins only — solder your own wires if you need flying leads.\u003c\/p\u003e\n\u003cbr\u003e\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eBare solder pins for direct PCB \/ perfboard mounting\u003c\/li\u003e\n\u003cli\u003e1-slot: 2 pins · 2-slot: 4 independent pins\u003c\/li\u003e\n\u003cli\u003eWire the 2-slot in parallel (3.7V) or series (7.4V)\u003c\/li\u003e\n\u003cli\u003eTough ABS shell resists knocks, dust \u0026amp; moisture\u003c\/li\u003e\n\u003cli\u003eNickel-plated springs grip flat- \u0026amp; button-top cells\u003c\/li\u003e\n\u003cli\u003eSnap-fit cells in and out — no tools needed\u003c\/li\u003e\n\u003cli\u003eFits standard 18650 Li-ion (3.7V) cells\u003c\/li\u003e\n\u003cli\u003eStackable footprint for tidy multi-cell packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaterial\u003c\/span\u003e\u003cstrong\u003eABS plastic, nickel-plated springs\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBattery type\u003c\/span\u003e\u003cstrong\u003e18650 Li-ion (3.7V)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCell fit\u003c\/span\u003e\u003cstrong\u003eFlat top \u0026amp; button top\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConfigurations\u003c\/span\u003e\u003cstrong\u003e1 Slot (single) \/ 2 Slot (dual)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSolder pins\u003c\/span\u003e\u003cstrong\u003e1 Slot = 2 pins \/ 2 Slot = 4 independent pins\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003e2-slot wiring\u003c\/span\u003e\u003cstrong\u003eParallel 3.7V (2× capacity) or Series 7.4V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection\u003c\/span\u003e\u003cstrong\u003eBare solder pins (no leads)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting\u003c\/span\u003e\u003cstrong\u003ePCB \/ perfboard\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003e1-slot size\u003c\/span\u003e\u003cstrong\u003e~78 × 20 × 19mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003e2-slot size\u003c\/span\u003e\u003cstrong\u003e~78 × 41 × 19mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eColour\u003c\/span\u003e\u003cstrong\u003eBlack\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e18650 battery holder (your chosen slot count)\u003c\/strong\u003e\u003cp\u003eBare-pin holder only — no wire leads or batteries included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eDIY power banks \u0026amp; USB chargers\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED \u0026amp; lighting projects\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRC, robotics \u0026amp; automation packs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSolar \u0026amp; battery storage builds\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eArduino \/ ESP32 power supplies\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBattery testing \u0026amp; spare-cell storage\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eGetting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eInsert your cell\u003c\/strong\u003e\u003cp\u003eSnap an 18650 into the holder — the sprung contact takes flat-top or button-top cells.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMount and solder\u003c\/strong\u003e\u003cp\u003ePush the bare pins through your PCB or perfboard and solder underneath, or solder wires straight to the pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eChoose your wiring (2-slot)\u003c\/strong\u003e\u003cp\u003eJoin the two + pins and two − pins for parallel (3.7V, 2× capacity), or link one cell's − to the other's + for series (7.4V).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePower your build\u003c\/strong\u003e\u003cp\u003eConnect to your circuit, charger or BMS and you're ready to go.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eCommon questions\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__faqs\"\u003e\n\u003cdetails class=\"nznpd__faq\" open\u003e\u003csummary\u003eDo these come with wire leads?\u003c\/summary\u003e\u003cp\u003eNo. These are the bare solder-pin type, designed to mount straight onto a PCB or perfboard. If you need flying leads, just solder your own wires to the pins.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eHow do I wire the 2-slot — series or parallel?\u003c\/summary\u003e\u003cp\u003eThe 2-slot brings out 4 independent solder pins. Join the two + pins and the two − pins for parallel (3.7V with double the capacity), or link one cell's − to the other's + for series (7.4V). It's molded \"PARALLEL\" to show the default cell orientation, but the independent pins let you do either.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eDo they hold protected (button-top) cells?\u003c\/summary\u003e\u003cp\u003eYes. The sprung contacts take both flat-top and slightly longer protected button-top 18650 cells.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eWhat's the difference between the 1-slot and 2-slot?\u003c\/summary\u003e\u003cp\u003eThe 1-slot holds a single 18650 and brings out 2 pins. The 2-slot holds two cells with 4 independent pins, so you can wire them in parallel (3.7V) or series (7.4V). Choose your configuration at checkout.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails class=\"nznpd__faq\"\u003e\u003csummary\u003eAre batteries included?\u003c\/summary\u003e\u003cp\u003eNo, the holders are sold on their own so you can use the 18650 cells you already have.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e These are the bare-pin version — no wire leads included. Every order is checked before it ships from our Te Awamutu stock.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"1 Slot","offer_id":42882002288736,"sku":"BH-18650-1S","price":2.99,"currency_code":"NZD","in_stock":true},{"title":"2 Slot","offer_id":42882002321504,"sku":"BH-18650-2S","price":3.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/Overall_Slot_Product_Hero.jpg?v=1781739622"},{"product_id":"solder-seal-heat-shrink-wire-connectors-waterproof-solder-butt-splice-terminals","title":"Solder Seal Heat Shrink Wire Connectors – Waterproof Solder Butt Splice Terminals","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6;max-width:72ch}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__sizes{border:2px solid var(--line);border-radius:12px;overflow:hidden;font-size:14px}\n.nznpd__sizes .r{display:grid;grid-template-columns:1.1fr 1fr 1fr;gap:12px;padding:11px 16px;align-items:center}\n.nznpd__sizes .r:nth-child(odd){background:var(--soft)}\n.nznpd__sizes .r--head{background:var(--ink) !important;color:#fff;font-weight:700;font-size:12px;letter-spacing:.04em;text-transform:uppercase}\n.nznpd__sizes .sw{display:inline-flex;align-items:center;gap:8px;font-weight:700;color:var(--ink)}\n.nznpd__sizes .dot{width:13px;height:13px;border-radius:999px;border:1px solid #cfd6de;flex:0 0 auto}\n.nznpd__tiers{display:grid;grid-template-columns:repeat(4,1fr);gap:10px}\n.nznpd__tier{border:2px solid var(--line);border-radius:12px;background:var(--soft);padding:14px;text-align:center}\n.nznpd__tier strong{display:block;font-size:15px;color:var(--ink)}\n.nznpd__tier span{font-size:12px;color:var(--mut)}\n.nznpd__tier b{display:block;margin-top:6px;font-size:13px;font-weight:800;color:var(--o)}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__sizes .r{grid-template-columns:1fr;gap:3px}.nznpd__sizes .r--head{display:none}.nznpd__tiers{grid-template-columns:repeat(2,1fr)}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eSolder and seal a wire join in one step, with no soldering iron, no separate heat-shrink and no electrical tape. Each connector has a \u003cstrong\u003elow-temperature solder ring\u003c\/strong\u003e in the centre and \u003cstrong\u003eadhesive-lined heat-shrink\u003c\/strong\u003e at both ends. Slide it over your wires, hit it with a heat gun, and the solder bonds the conductors while the tubing shrinks into a tidy, \u003cstrong\u003ewaterproof\u003c\/strong\u003e joint. Choose your wire size by colour below. Sold individually with a \u003cstrong\u003e10-piece minimum\u003c\/strong\u003e, and the more you buy, the less you pay per connector.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eSolder + seal + insulate in a single step\u003c\/li\u003e\n\u003cli\u003eNo soldering iron needed, just a heat gun\u003c\/li\u003e\n\u003cli\u003eWaterproof, dust-proof adhesive-lined seal\u003c\/li\u003e\n\u003cli\u003eLow-temp solder ring melts at ~138°C\u003c\/li\u003e\n\u003cli\u003eClear sleeve lets you see the solder flow\u003c\/li\u003e\n\u003cli\u003e7 colour-coded sizes from 26 to 8 AWG\u003c\/li\u003e\n\u003cli\u003eBuy more, pay less with automatic bulk pricing\u003c\/li\u003e\n\u003cli\u003eStocked and dispatched fast from NZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eChoose your size by colour\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__sizes\"\u003e\n\u003cdiv class=\"r r--head\"\u003e\n\u003cspan\u003eColour\u003c\/span\u003e\u003cspan\u003eWire range (AWG)\u003c\/span\u003e\u003cspan\u003eWire range (mm²)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#fff\"\u003e\u003c\/span\u003eWhite\u003c\/span\u003e\u003cspan\u003e24 - 26 AWG\u003c\/span\u003e\u003cspan\u003e0.25 - 0.34 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#E53935\"\u003e\u003c\/span\u003eRed\u003c\/span\u003e\u003cspan\u003e18 - 22 AWG\u003c\/span\u003e\u003cspan\u003e0.5 - 1.5 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#43A047\"\u003e\u003c\/span\u003eGreen\u003c\/span\u003e\u003cspan\u003e16 - 18 AWG\u003c\/span\u003e\u003cspan\u003e0.75 - 1.5 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#1E88E5\"\u003e\u003c\/span\u003eBlue\u003c\/span\u003e\u003cspan\u003e14 - 16 AWG\u003c\/span\u003e\u003cspan\u003e1.5 - 2.5 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#8E24AA\"\u003e\u003c\/span\u003ePurple\u003c\/span\u003e\u003cspan\u003e12 - 14 AWG\u003c\/span\u003e\u003cspan\u003e2.5 - 4.0 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#FDD835\"\u003e\u003c\/span\u003eYellow\u003c\/span\u003e\u003cspan\u003e10 - 12 AWG\u003c\/span\u003e\u003cspan\u003e4.0 - 6.0 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"r\"\u003e\n\u003cspan class=\"sw\"\u003e\u003cspan class=\"dot\" style=\"background:#FB8C00\"\u003e\u003c\/span\u003eOrange\u003c\/span\u003e\u003cspan\u003e8 - 10 AWG\u003c\/span\u003e\u003cspan\u003e6.0 - 10 mm²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eBuy more, pay less\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__tiers\"\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e10+\u003c\/strong\u003e\u003cspan\u003eminimum order\u003c\/span\u003e\u003cb\u003eBase price\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e25+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 15%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e50+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 30%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e100+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 45%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eSolder seal heat-shrink butt connector\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSolder ring\u003c\/span\u003e\u003cstrong\u003eLow-temp lead-free alloy, flows ~138°C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation\u003c\/span\u003e\u003cstrong\u003eAdhesive-lined polyolefin heat-shrink\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSealing\u003c\/span\u003e\u003cstrong\u003eWaterproof \u0026amp; dust-proof (IP67-rated join)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eActivation\u003c\/span\u003e\u003cstrong\u003eHeat gun ~250-300°C (hot air)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire range\u003c\/span\u003e\u003cstrong\u003e26-8 AWG \/ 0.25-10 mm² (by colour)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating temp\u003c\/span\u003e\u003cstrong\u003e-45°C to +125°C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSleeve\u003c\/span\u003e\u003cstrong\u003eClear, so you can see the solder flow\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eIndividual connectors, 10-piece minimum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/SOLDER-SEAL-Datasheet-v2.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the Solder Seal Heat Shrink Wire Connectors – Waterproof Solder Butt Splice Terminals technical datasheet PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003ca id=\"quick-start-guide\" class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/SOLDER-SEAL-QuickStart.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the Solder Seal Heat Shrink Wire Connectors – Waterproof Solder Butt Splice Terminals quick start guide PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eQuick Start guide\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomotive \u0026amp; 12V wiring repairs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBoat, trailer \u0026amp; caravan wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED strips, lighting \u0026amp; accessories\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBattery, inverter \u0026amp; solar cable up to 10 mm²\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSpeaker, audio \u0026amp; signal wires\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAny splice where you can't reach with an iron\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to use them\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip \u0026amp; overlap\u003c\/strong\u003e\u003cp\u003eStrip ~8mm off each wire and twist or overlap the bare strands together in the centre.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSlide the connector on\u003c\/strong\u003e\u003cp\u003eCentre the solder ring directly over the join so the bare wires sit inside it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eApply heat\u003c\/strong\u003e\u003cp\u003ePlay a heat gun evenly around the connector. The solder ring melts and flows into the wires first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSeal it\u003c\/strong\u003e\u003cp\u003eKeep heating until the coloured bands and tubing shrink fully and a little adhesive weeps from the ends. That is your waterproof seal. Let it cool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e Use a proper hot-air heat gun for the best seal and rotate it around the connector so the whole joint heats evenly. Stocked and dispatched fast from our Te Awamutu base, at overseas prices without the overseas wait.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"White (24-26 AWG)","offer_id":42889068150880,"sku":"SSC-WHT","price":0.38,"currency_code":"NZD","in_stock":true},{"title":"Red (18-22 AWG)","offer_id":42889068183648,"sku":"SSC-RED","price":0.43,"currency_code":"NZD","in_stock":true},{"title":"Green (16-18 AWG)","offer_id":42889068216416,"sku":"SSC-GRN","price":0.47,"currency_code":"NZD","in_stock":true},{"title":"Blue (14-16 AWG)","offer_id":42889068249184,"sku":"SSC-BLU","price":0.48,"currency_code":"NZD","in_stock":true},{"title":"Purple (12-14 AWG)","offer_id":43060898857056,"sku":"SSC-PUR","price":0.72,"currency_code":"NZD","in_stock":true},{"title":"Yellow (10-12 AWG)","offer_id":42889068281952,"sku":"SSC-YEL","price":0.5,"currency_code":"NZD","in_stock":true},{"title":"Orange (8-10 AWG)","offer_id":43060898889824,"sku":"SSC-ORG","price":0.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/SolderTerminalWireProductHero.png?v=1781848950"},{"product_id":"insulated-bootlace-ferrules-wire-end-cord-terminals-0-75-4mm-12-20-awg","title":"Insulated Bootlace Ferrules – Wire End Cord Terminals (0.5–6mm² \/ 10–22 AWG)","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6;padding:0 5%;box-sizing:border-box}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"✓\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 24px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__tbl{width:100%;border-collapse:collapse;border:2px solid var(--line);border-radius:12px;overflow:hidden;font-size:14px}\n.nznpd__tbl th,.nznpd__tbl td{padding:10px 12px;text-align:left;border-bottom:1px solid var(--line)}\n.nznpd__tbl th{background:var(--soft);font-weight:800;color:var(--ink);font-size:12px;text-transform:uppercase;letter-spacing:.04em}\n.nznpd__tbl tr:nth-child(even) td{background:var(--soft)}\n.nznpd__tbl td:first-child{font-weight:700;color:var(--ink)}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__tbl{font-size:12.5px}.nznpd__tbl th,.nznpd__tbl td{padding:8px}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eInsulated bootlace ferrules (cord-end terminals) crimp onto the stripped end of stranded wire to give a clean, solid pin that won't fray, splay or work loose. They're the professional way to land stranded cable into screw terminals — DIN-rail blocks, circuit breakers, contactors, terminal strips and lever connectors all hold a ferrule far more reliably than bare strands.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eStops stranded wire fraying \u0026amp; stray strands\u003c\/li\u003e\n\u003cli\u003eSolid, secure crimp for reliable terminations\u003c\/li\u003e\n\u003cli\u003eColour-coded insulated collar by wire size\u003c\/li\u003e\n\u003cli\u003eElectro-tinned copper barrel\u003c\/li\u003e\n\u003cli\u003eFits screw terminals, DIN blocks, breakers \u0026amp; contactors\u003c\/li\u003e\n\u003cli\u003eDIN 46228-4 sizing, 10–22 AWG range\u003c\/li\u003e\n\u003cli\u003eSold per piece — buy only the sizes you need\u003c\/li\u003e\n\u003cli\u003eTidier, safer, more professional panel wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSizes \u0026amp; dimensions\u003c\/h3\u003e\n\u003ctable class=\"nznpd__tbl\"\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eWire\u003c\/th\u003e\n\u003cth\u003eAWG\u003c\/th\u003e\n\u003cth\u003ePin length\u003c\/th\u003e\n\u003cth\u003eOverall length\u003c\/th\u003e\n\u003cth\u003eCollar Ø\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE0508\u003c\/td\u003e\n\u003ctd\u003e0.5mm²\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003ctd\u003e14.0mm\u003c\/td\u003e\n\u003ctd\u003e2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE7508\u003c\/td\u003e\n\u003ctd\u003e0.75mm²\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003ctd\u003e14.4mm\u003c\/td\u003e\n\u003ctd\u003e2.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE1008\u003c\/td\u003e\n\u003ctd\u003e1.0mm²\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003ctd\u003e14.4mm\u003c\/td\u003e\n\u003ctd\u003e3.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE1508\u003c\/td\u003e\n\u003ctd\u003e1.5mm²\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003ctd\u003e14.4mm\u003c\/td\u003e\n\u003ctd\u003e3.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE2508\u003c\/td\u003e\n\u003ctd\u003e2.5mm²\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e8.0mm\u003c\/td\u003e\n\u003ctd\u003e15.6mm\u003c\/td\u003e\n\u003ctd\u003e4.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE4009\u003c\/td\u003e\n\u003ctd\u003e4.0mm²\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e9.0mm\u003c\/td\u003e\n\u003ctd\u003e16.5mm\u003c\/td\u003e\n\u003ctd\u003e4.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE6012\u003c\/td\u003e\n\u003ctd\u003e6.0mm²\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e12.0mm\u003c\/td\u003e\n\u003ctd\u003e20.4mm\u003c\/td\u003e\n\u003ctd\u003e6.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eControl panels \u0026amp; DIN-rail wiring\u003c\/li\u003e\n\u003cli\u003eBreakers, contactors \u0026amp; terminal blocks\u003c\/li\u003e\n\u003cli\u003e3D printer, CNC \u0026amp; automation builds\u003c\/li\u003e\n\u003cli\u003eAutomotive, marine \u0026amp; 12\/24V systems\u003c\/li\u003e\n\u003cli\u003eAudio, lighting \u0026amp; power distribution\u003c\/li\u003e\n\u003cli\u003eAny stranded-to-screw-terminal connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e Ferrules are crimped on with a ferrule (bootlace) crimp tool — a normal terminal crimper won't do it. Sold individually with a \u003cstrong\u003eminimum order of 5 pieces\u003c\/strong\u003e; mix sizes to suit your job. Choose the ferrule that matches your wire's mm²\/AWG.\u003c\/p\u003e\n\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/FERRULE-QuickStart.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the ferrule Quick Start guide (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eQuick start guide - crimp sizes and colour codes\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"0.5mm² · 22 AWG (E0508)","offer_id":42892281315424,"sku":"FER-E0508","price":0.14,"currency_code":"NZD","in_stock":true},{"title":"0.75mm² · 20 AWG (E7508)","offer_id":42892279119968,"sku":"FER-E7508","price":0.15,"currency_code":"NZD","in_stock":true},{"title":"1.0mm² · 18 AWG (E1008)","offer_id":42892279152736,"sku":"FER-E1008","price":0.16,"currency_code":"NZD","in_stock":true},{"title":"1.5mm² · 16 AWG (E1508)","offer_id":42892279185504,"sku":"FER-E1508","price":0.18,"currency_code":"NZD","in_stock":true},{"title":"2.5mm² · 14 AWG (E2508)","offer_id":42963346161760,"sku":"FER-E2508","price":0.18,"currency_code":"NZD","in_stock":true},{"title":"4.0mm² · 12 AWG (E4009)","offer_id":42892279218272,"sku":"FER-E4009","price":0.25,"currency_code":"NZD","in_stock":true},{"title":"6.0mm² · 10 AWG (E6012)","offer_id":42966565060704,"sku":"FER-E6012","price":0.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/Bootlace_Ferrule_Hero.png?v=1784527877"},{"product_id":"insulated-bullet-connectors-fully-insulated-female-bullet-terminals","title":"Insulated Bullet Connectors – Fully Insulated Female Bullet Terminals","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__tiers{display:grid;grid-template-columns:repeat(4,1fr);gap:10px}\n.nznpd__tier{border:2px solid var(--line);border-radius:12px;background:var(--soft);padding:14px;text-align:center}\n.nznpd__tier strong{display:block;font-size:15px;color:var(--ink)}\n.nznpd__tier span{font-size:12px;color:var(--mut)}\n.nznpd__tier b{display:block;margin-top:6px;font-size:13px;font-weight:800;color:var(--o)}\n.nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px}\n.nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center;font-size:13px}\n.nznpd__included strong{display:block;font-size:15px;margin-bottom:3px}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd__faqs{display:grid;gap:10px}\n.nznpd__faq{border:2px solid var(--line);border-radius:12px;background:#fff;padding:0 16px;transition:border-color .18s ease}\n.nznpd__faq[open]{border-color:#FCE0C6}\n.nznpd__faq summary{list-style:none;cursor:pointer;padding:15px 0;font-weight:700;font-size:14px;color:var(--ink);display:flex;justify-content:space-between;align-items:center;gap:12px}\n.nznpd__faq summary::-webkit-details-marker{display:none}\n.nznpd__faq summary::after{content:\"\\203A\";flex:0 0 auto;color:var(--o);font-weight:800;font-size:20px;line-height:1;display:inline-block;transform:rotate(90deg);transition:transform .22s ease}\n.nznpd__faq[open] summary::after{transform:rotate(-90deg)}\n.nznpd__faq p{padding:0 0 16px;font-size:14px}\n.nznpd__faq[open] p{animation:nznpdReveal .24s ease}\n@keyframes nznpdReveal{from{opacity:0;transform:translateY(-5px)}to{opacity:1;transform:translateY(0)}}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (prefers-reduced-motion:reduce){.nznpd__faq summary::after{transition:none}.nznpd__faq[open] p{animation:none}}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__tiers{grid-template-columns:repeat(2,1fr)}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eFully-insulated \u003cstrong\u003efemale bullet connectors\u003c\/strong\u003e — the socket half of a quick-disconnect bullet pair. Strip your wire, slide it into the barrel and crimp, and you have a clean, insulated push-on terminal that mates with a matching \u003cstrong\u003emale bullet plug\u003c\/strong\u003e. The tough colour-coded PVC sleeve fully covers the crimp for a safe, vibration-proof join you can pull apart and reconnect whenever you need. Ideal for \u003cstrong\u003eautomotive, marine, trailer and 12V wiring\u003c\/strong\u003e. This is the \u003cstrong\u003eYellow\u003c\/strong\u003e heavy-gauge size with a \u003cstrong\u003e4mm bullet socket\u003c\/strong\u003e — more colours\/sizes coming soon.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eFully-insulated PVC sleeve — no exposed metal once crimped\u003c\/li\u003e\n\u003cli\u003eColour-coded to wire gauge for quick sizing\u003c\/li\u003e\n\u003cli\u003eTin-plated copper barrel for a low-resistance crimp\u003c\/li\u003e\n\u003cli\u003ePush-on \/ pull-off quick disconnect\u003c\/li\u003e\n\u003cli\u003eMates with standard 4mm male bullet connectors\u003c\/li\u003e\n\u003cli\u003eVibration-resistant, tidy automotive-grade join\u003c\/li\u003e\n\u003cli\u003eBuy more, pay less — automatic bulk pricing\u003c\/li\u003e\n\u003cli\u003eStocked and dispatched fast from NZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eBuy more, pay less\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__tiers\"\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e10+\u003c\/strong\u003e\u003cspan\u003eminimum order\u003c\/span\u003e\u003cb\u003eBase price\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e25+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 14%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e50+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 24%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e100+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 36%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eFully-insulated female bullet connector (socket)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBullet size\u003c\/span\u003e\u003cstrong\u003e4.0 mm female socket\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire size (this listing)\u003c\/span\u003e\u003cstrong\u003eYellow — 4.0–6.0 mm² \/ 12–10 AWG\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTerminal\u003c\/span\u003e\u003cstrong\u003eTin-plated copper\/brass barrel\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation\u003c\/span\u003e\u003cstrong\u003eColour-coded PVC sleeve, fully insulated\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection\u003c\/span\u003e\u003cstrong\u003eCrimp (insulated-terminal crimp tool)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMates with\u003c\/span\u003e\u003cstrong\u003eMatching 4mm male bullet connector\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eVoltage rating\u003c\/span\u003e\u003cstrong\u003eUp to 600V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eIndividual connectors, 10-piece minimum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat you'll receive\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e10+\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLoose insulated female bullet connectors (Yellow)\u003c\/strong\u003e\n\u003cp\u003eSold per piece with a 10-connector minimum — set the exact quantity you need at checkout. Bulk discounts apply automatically at 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomotive \u0026amp; 12V wiring repairs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBoat, trailer \u0026amp; caravan looms\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRC, hobby \u0026amp; battery leads\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSpeaker \u0026amp; accessory connections\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eQuick-disconnect joins you may separate later\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eHeavy-gauge (10–12 AWG) power runs\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to crimp them\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the wire\u003c\/strong\u003e\u003cp\u003eStrip roughly 6–8mm of insulation to expose clean, twisted strands.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eInsert into the barrel\u003c\/strong\u003e\u003cp\u003eSlide the bare wire fully into the connector's metal barrel, up to the insulation sleeve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp\u003c\/strong\u003e\u003cp\u003eSqueeze the insulated barrel with a crimping tool until firm, then tug the wire gently to confirm it's locked in.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect\u003c\/strong\u003e\u003cp\u003ePush the female bullet onto a matching male bullet. It grips firmly and pulls apart cleanly whenever you need to disconnect.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eCommon questions\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__faqs\"\u003e\n\u003cdetails class=\"nznpd__faq\" open\u003e\n\u003csummary\u003eAre these male or female?\u003c\/summary\u003e\n\u003cp\u003eThese are the \u003cstrong\u003efemale\u003c\/strong\u003e (socket) half — the end you push a matching male bullet connector into. Bullet connectors work as a male + female pair, so pick up the matching 4mm male size to complete a join.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWhich colour\/size do I choose?\u003c\/summary\u003e\n\u003cp\u003eBullet connectors are colour-coded by wire gauge: Red 16–22 AWG, Blue 14–16 AWG, Yellow 10–12 AWG. This listing is the \u003cstrong\u003eYellow\u003c\/strong\u003e heavy-gauge size (4.0–6.0 mm², 4mm bullet). More colours\/sizes are coming soon.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eDo I need a special tool?\u003c\/summary\u003e\n\u003cp\u003eA basic insulated-terminal crimping tool gives the strongest, tidiest result. Combination pliers can work in a pinch, but a proper crimper is far more reliable for a connection that won't pull loose.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWhy is there a 10-piece minimum?\u003c\/summary\u003e\n\u003cp\u003eThese are small, low-cost parts, so we sell them in a minimum of 10 to keep per-connector pricing low and shipping worthwhile. Mix the quantity to suit your job — the price per connector drops automatically as you pass 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eAre they fully insulated?\u003c\/summary\u003e\n\u003cp\u003eYes. The PVC sleeve covers the entire barrel and crimp, so once crimped there's no exposed metal — safer against shorts and vibration in automotive and marine looms.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e match the connector size to your wire gauge for the best crimp, and pair each female bullet with a matching male to complete the join. Stocked and dispatched fast from our Te Awamutu base — overseas prices, without the overseas wait.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Yellow (10–12 AWG)","offer_id":42926656815200,"sku":"BC-FEM-YEL","price":0.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/insulated-bullet-connector-yellow.png?v=1783584269"},{"product_id":"insulated-ring-connectors-red-m4-ring-crimp-terminals","title":"Insulated Ring Connectors – Red M4 Ring Crimp Terminals","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__tiers{display:grid;grid-template-columns:repeat(4,1fr);gap:10px}\n.nznpd__tier{border:2px solid var(--line);border-radius:12px;background:var(--soft);padding:14px;text-align:center}\n.nznpd__tier strong{display:block;font-size:15px;color:var(--ink)}\n.nznpd__tier span{font-size:12px;color:var(--mut)}\n.nznpd__tier b{display:block;margin-top:6px;font-size:13px;font-weight:800;color:var(--o)}\n.nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px}\n.nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center;font-size:13px}\n.nznpd__included strong{display:block;font-size:15px;margin-bottom:3px}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd__faqs{display:grid;gap:10px}\n.nznpd__faq{border:2px solid var(--line);border-radius:12px;background:#fff;padding:0 16px;transition:border-color .18s ease}\n.nznpd__faq[open]{border-color:#FCE0C6}\n.nznpd__faq summary{list-style:none;cursor:pointer;padding:15px 0;font-weight:700;font-size:14px;color:var(--ink);display:flex;justify-content:space-between;align-items:center;gap:12px}\n.nznpd__faq summary::-webkit-details-marker{display:none}\n.nznpd__faq summary::after{content:\"\\203A\";flex:0 0 auto;color:var(--o);font-weight:800;font-size:20px;line-height:1;display:inline-block;transform:rotate(90deg);transition:transform .22s ease}\n.nznpd__faq[open] summary::after{transform:rotate(-90deg)}\n.nznpd__faq p{padding:0 0 16px;font-size:14px}\n.nznpd__faq[open] p{animation:nznpdReveal .24s ease}\n@keyframes nznpdReveal{from{opacity:0;transform:translateY(-5px)}to{opacity:1;transform:translateY(0)}}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (prefers-reduced-motion:reduce){.nznpd__faq summary::after{transition:none}.nznpd__faq[open] p{animation:none}}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__tiers{grid-template-columns:repeat(2,1fr)}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eFully-insulated \u003cstrong\u003ered ring terminals\u003c\/strong\u003e — crimp one onto your wire, then slide the \u003cstrong\u003e4mm (M4) ring\u003c\/strong\u003e over a stud, screw or terminal post and bolt it down for a secure, permanent connection that won't pull off. The tough red PVC sleeve fully covers the crimp barrel, and the tin-plated ring gives a low-resistance, corrosion-resistant contact. The \u003cstrong\u003ered\u003c\/strong\u003e colour codes it for \u003cstrong\u003e0.5–1.5 mm² \/ 22–16 AWG\u003c\/strong\u003e wire. Perfect for \u003cstrong\u003ebattery terminals, earth\/ground points and 12V wiring\u003c\/strong\u003e — more colours\/stud sizes coming soon.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eFully-insulated PVC sleeve — no exposed metal once crimped\u003c\/li\u003e\n\u003cli\u003e4mm (M4) ring bolts onto studs, screws \u0026amp; posts\u003c\/li\u003e\n\u003cli\u003eTin-plated copper barrel for a low-resistance crimp\u003c\/li\u003e\n\u003cli\u003eColour-coded red for 22–16 AWG wire\u003c\/li\u003e\n\u003cli\u003ePermanent, vibration-proof bolt-on connection\u003c\/li\u003e\n\u003cli\u003eIdeal for battery, earth \u0026amp; ground terminals\u003c\/li\u003e\n\u003cli\u003eBuy more, pay less — automatic bulk pricing\u003c\/li\u003e\n\u003cli\u003eStocked and dispatched fast from NZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eBuy more, pay less\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__tiers\"\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e10+\u003c\/strong\u003e\u003cspan\u003eminimum order\u003c\/span\u003e\u003cb\u003eBase price\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e25+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 15%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e50+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 30%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e100+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 50%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eFully-insulated ring crimp terminal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRing stud hole\u003c\/span\u003e\u003cstrong\u003e4.0 mm (fits M4 studs \u0026amp; screws)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire size\u003c\/span\u003e\u003cstrong\u003eRed — 0.5–1.5 mm² \/ 22–16 AWG\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTerminal\u003c\/span\u003e\u003cstrong\u003eTin-plated copper\/brass ring\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation\u003c\/span\u003e\u003cstrong\u003eRed PVC sleeve, fully insulated\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection\u003c\/span\u003e\u003cstrong\u003eCrimp (insulated-terminal crimp tool)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eVoltage rating\u003c\/span\u003e\u003cstrong\u003eUp to 600V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eIndividual connectors, 10-piece minimum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat you'll receive\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e10+\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLoose insulated ring terminals (Red, 4mm \/ M4)\u003c\/strong\u003e\n\u003cp\u003eSold per piece with a 10-connector minimum — set the exact quantity you need at checkout. Bulk discounts apply automatically at 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBattery terminals \u0026amp; earth\/ground points\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomotive \u0026amp; 12V wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAppliance, motor \u0026amp; equipment terminals\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eDistribution blocks \u0026amp; bus bars\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eScrew-down terminal posts\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAny bolt-on wire connection\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to crimp them\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the wire\u003c\/strong\u003e\u003cp\u003eStrip roughly 5–6mm of insulation to expose clean, twisted strands.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eInsert into the barrel\u003c\/strong\u003e\u003cp\u003eSlide the bare wire fully into the connector's metal barrel, up to the insulation sleeve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp\u003c\/strong\u003e\u003cp\u003eSqueeze the insulated barrel with a crimping tool until firm, then tug the wire gently to confirm it's locked in.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eBolt it down\u003c\/strong\u003e\u003cp\u003eSlip the 4mm ring over your M4 stud, screw or post and tighten the nut or screw for a solid, permanent connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eCommon questions\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__faqs\"\u003e\n\u003cdetails class=\"nznpd__faq\" open\u003e\n\u003csummary\u003eWhat size stud or screw does it fit?\u003c\/summary\u003e\n\u003cp\u003eThe ring has a \u003cstrong\u003e4.0 mm hole\u003c\/strong\u003e, so it slides onto an \u003cstrong\u003eM4\u003c\/strong\u003e stud, bolt or screw (or anything up to ~4mm shank). Match the ring hole to the post you're bolting to.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWhich colour\/size do I choose?\u003c\/summary\u003e\n\u003cp\u003eRing terminals are colour-coded by wire gauge: Red 22–16 AWG (0.5–1.5 mm²), Blue 16–14 AWG, Yellow 12–10 AWG. This listing is the \u003cstrong\u003eRed\u003c\/strong\u003e size with a \u003cstrong\u003e4mm (M4)\u003c\/strong\u003e ring. More colours and stud sizes are coming soon.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eDo I need a special tool?\u003c\/summary\u003e\n\u003cp\u003eA basic insulated-terminal crimping tool gives the strongest, tidiest result. Combination pliers can work in a pinch, but a proper crimper is far more reliable for a connection that won't pull loose.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWhy is there a 10-piece minimum?\u003c\/summary\u003e\n\u003cp\u003eThese are small, low-cost parts, so we sell them in a minimum of 10 to keep per-connector pricing low and shipping worthwhile. Mix the quantity to suit your job — the price per connector drops automatically as you pass 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eAre they fully insulated?\u003c\/summary\u003e\n\u003cp\u003eYes. The red PVC sleeve covers the entire barrel and crimp, so once crimped there's no exposed metal on the wire side — safer against shorts and vibration in automotive and marine wiring.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e match the connector colour to your wire gauge and the ring hole to your stud size for the best fit. Stocked and dispatched fast from our Te Awamutu base — overseas prices, without the overseas wait.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Red · M4 (16–22 AWG)","offer_id":42927011790944,"sku":"RT-RED-M4","price":0.29,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/insulated-ring-connector-red-4mm.png?v=1783591023"},{"product_id":"jst-xh-2-5mm-4-pin-male-header-vertical-smd-pcb-connector","title":"JST-XH 2.5mm 4-Pin Male Header – Vertical SMD PCB Connector","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__tiers{display:grid;grid-template-columns:repeat(4,1fr);gap:10px}\n.nznpd__tier{border:2px solid var(--line);border-radius:12px;background:var(--soft);padding:14px;text-align:center}\n.nznpd__tier strong{display:block;font-size:15px;color:var(--ink)}\n.nznpd__tier span{font-size:12px;color:var(--mut)}\n.nznpd__tier b{display:block;margin-top:6px;font-size:13px;font-weight:800;color:var(--o)}\n.nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px}\n.nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center;font-size:13px}\n.nznpd__included strong{display:block;font-size:15px;margin-bottom:3px}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd__faqs{display:grid;gap:10px}\n.nznpd__faq{border:2px solid var(--line);border-radius:12px;background:#fff;padding:0 16px;transition:border-color .18s ease}\n.nznpd__faq[open]{border-color:#FCE0C6}\n.nznpd__faq summary{list-style:none;cursor:pointer;padding:15px 0;font-weight:700;font-size:14px;color:var(--ink);display:flex;justify-content:space-between;align-items:center;gap:12px}\n.nznpd__faq summary::-webkit-details-marker{display:none}\n.nznpd__faq summary::after{content:\"\\203A\";flex:0 0 auto;color:var(--o);font-weight:800;font-size:20px;line-height:1;display:inline-block;transform:rotate(90deg);transition:transform .22s ease}\n.nznpd__faq[open] summary::after{transform:rotate(-90deg)}\n.nznpd__faq p{padding:0 0 16px;font-size:14px}\n.nznpd__faq[open] p{animation:nznpdReveal .24s ease}\n@keyframes nznpdReveal{from{opacity:0;transform:translateY(-5px)}to{opacity:1;transform:translateY(0)}}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (prefers-reduced-motion:reduce){.nznpd__faq summary::after{transition:none}.nznpd__faq[open] p{animation:none}}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__tiers{grid-template-columns:repeat(2,1fr)}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA \u003cstrong\u003eJST-XH 2.5mm 4-pin male header\u003c\/strong\u003e (wafer\/post) for your PCB — the board-mount side of a JST-XH connector pair. It's a \u003cstrong\u003estraight, vertical top-entry\u003c\/strong\u003e header with \u003cstrong\u003eSMD surface-mount\u003c\/strong\u003e tabs: it solders flat onto your board and the matching wired \u003cstrong\u003eJST-XH female housing plugs in from directly above\u003c\/strong\u003e. The \u003cstrong\u003e2.5mm pitch\u003c\/strong\u003e JST-XH system is one of the most common connectors in hobby electronics — you'll know it as the \u003cstrong\u003eRC LiPo balance-lead\u003c\/strong\u003e connector — single-row, polarised so it only goes in one way, with a positive click. Ideal for \u003cstrong\u003ebattery packs, sensors, modules and signal leads\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eGenuine 2.5mm JST-XH pitch — fits standard XH housings\u003c\/li\u003e\n\u003cli\u003eStraight \/ vertical top-entry orientation\u003c\/li\u003e\n\u003cli\u003eSMD surface-mount — solders flat to the board\u003c\/li\u003e\n\u003cli\u003ePolarised shroud — connects one way only\u003c\/li\u003e\n\u003cli\u003e4-pin, single row\u003c\/li\u003e\n\u003cli\u003eThe classic RC LiPo balance-lead connector\u003c\/li\u003e\n\u003cli\u003eBuy more, pay less — automatic bulk pricing\u003c\/li\u003e\n\u003cli\u003eStocked \u0026amp; dispatched fast from NZ — no overseas wait\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eBuy more, pay less\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__tiers\"\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e10+\u003c\/strong\u003e\u003cspan\u003eminimum order\u003c\/span\u003e\u003cb\u003eBase price\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e25+\u003c\/strong\u003e\u003cspan\u003eheaders\u003c\/span\u003e\u003cb\u003eSave 15%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e50+\u003c\/strong\u003e\u003cspan\u003eheaders\u003c\/span\u003e\u003cb\u003eSave 25%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e100+\u003c\/strong\u003e\u003cspan\u003eheaders\u003c\/span\u003e\u003cb\u003eSave 38%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSeries\u003c\/span\u003e\u003cstrong\u003eJST-XH compatible, 2.5 mm pitch\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePositions\u003c\/span\u003e\u003cstrong\u003e4-pin, single row\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eGender\u003c\/span\u003e\u003cstrong\u003eMale header (pins) — board-mount side\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOrientation\u003c\/span\u003e\u003cstrong\u003eStraight \/ vertical, top-entry\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting\u003c\/span\u003e\u003cstrong\u003eSMD surface-mount\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRating\u003c\/span\u003e\u003cstrong\u003e~3A per contact, ~250V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMates with\u003c\/span\u003e\u003cstrong\u003eJST-XH 2.5mm 4-pin female housing (sold separately)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eIndividual headers, 10-piece minimum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat you'll receive\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e10+\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLoose JST-XH 2.5mm 4-pin male headers (vertical SMD)\u003c\/strong\u003e\n\u003cp\u003eSold per piece with a 10-header minimum — set the exact quantity you need at checkout. Bulk discounts apply automatically at 25, 50 and 100 pieces. Mating wired housings and crimp terminals are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRC LiPo balance-lead connections\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBattery pack \u0026amp; BMS wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSensor \u0026amp; module signal leads\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCustom PCBs \u0026amp; breakout boards\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRobotics, drones \u0026amp; RC electronics\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eReplacing damaged JST-XH headers\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to fit it\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePosition on the pads\u003c\/strong\u003e\u003cp\u003ePlace the header on your PCB's SMD footprint, lining the shroud opening up with the board edge \/ your layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eTack one pad\u003c\/strong\u003e\u003cp\u003eSolder one corner tab first, then check it sits flat and square before doing the rest.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSolder the contacts\u003c\/strong\u003e\u003cp\u003eReflow or hand-solder each SMD tab and pin. Keep joints clean and bridge-free.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePlug in\u003c\/strong\u003e\u003cp\u003ePush the matching JST-XH female housing straight down onto the header until it clicks. It only fits one way.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eCommon questions\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__faqs\"\u003e\n\u003cdetails class=\"nznpd__faq\" open\u003e\n\u003csummary\u003eIs this the plug or the board part?\u003c\/summary\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eboard-mount male header\u003c\/strong\u003e (the pinned wafer that solders to your PCB). The mating part is the wired \u003cstrong\u003eJST-XH female housing\u003c\/strong\u003e with crimp contacts, which is a separate item.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWhat pitch is it — will it fit my housing?\u003c\/summary\u003e\n\u003cp\u003eIt's \u003cstrong\u003e2.5mm pitch (JST-XH)\u003c\/strong\u003e — the same connector used on RC LiPo balance leads. It mates with any standard 2.5mm JST-XH 4-pin housing. Don't confuse it with 2.0mm JST-PH or 1.25mm JST-GH — the pitch must match.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eIs it straight or right-angle?\u003c\/summary\u003e\n\u003cp\u003eIt's a \u003cstrong\u003estraight \/ vertical, top-entry\u003c\/strong\u003e header — the housing plugs in perpendicular to the board (from directly above), not from the side.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eIs it through-hole or SMD?\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eSMD (surface-mount)\u003c\/strong\u003e — it solders onto pads on the board surface rather than through drilled holes.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"nznpd__faq\"\u003e\n\u003csummary\u003eWhy is there a 10-piece minimum?\u003c\/summary\u003e\n\u003cp\u003eThese are small, low-cost parts, so we sell them in a minimum of 10 to keep per-header pricing low and shipping worthwhile. The price per header drops automatically as you pass 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e match the pitch (2.5mm XH) and pin count to your housing, and remember this is the board-side header only — grab the matching wired housing to complete the connector. Stocked and dispatched fast from our Te Awamutu base — overseas prices, without the overseas wait.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"4-Pin · XH 2.5mm","offer_id":42927258533984,"sku":"JST-XH-4P-M","price":0.49,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/jst-ph-4pin-male-hero.png?v=1783592284"},{"product_id":"wago-221-415-lever-connectors-5-pole-lever-nuts-32a-450v","title":"WAGO 221-415 Lever Connectors - 5 Pole Lever Nuts, 32A 450V","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThe WAGO 221-415 is a lever connector that joins up to five wires in one small clear block. Lift a lever, push the stripped wire in and close the lever to clamp it. You don't need any tools, and you can open it again later if the wiring changes. It takes solid, stranded and fine-stranded copper wire from 0.14 to 4 mm², so you can join flexible cable to solid house wire in the same connector. Any ports you don't need can be left empty. The clear housing lets you check that each wire is fully inserted. Sold individually, with quantity discounts when you buy more. Full manufacturer data is on \u003ca href=\"https:\/\/www.wago.com\/global\/installation-terminal-blocks-and-connectors\/splicing-connector-with-levers\/p\/221-415\" target=\"_blank\" rel=\"noopener nofollow\"\u003eWAGO's 221-415 product page\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eWAGO 221-415\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection points\u003c\/span\u003e\u003cstrong\u003e5\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRating (IEC)\u003c\/span\u003e\u003cstrong\u003e32A, 450V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRating (UL 486C)\u003c\/span\u003e\u003cstrong\u003e20A, 600V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSolid or stranded wire\u003c\/span\u003e\u003cstrong\u003e0.2 to 4 mm² (24 to 12 AWG)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFine-stranded wire\u003c\/span\u003e\u003cstrong\u003e0.14 to 4 mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStrip length\u003c\/span\u003e\u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMax operating temperature\u003c\/span\u003e\u003cstrong\u003e85°C (T85)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing\u003c\/span\u003e\u003cstrong\u003eClear polycarbonate, orange levers\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSize\u003c\/span\u003e\u003cstrong\u003e30 x 18.6 x 8.4 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003e4 g\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eReusable\u003c\/span\u003e\u003cstrong\u003eYes, lift the lever to release\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/221-415-5-Pole-Lever-Connector-Datasheet-v1.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the 221-415 technical datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWAGO 221-415 5-way lever connector\u003c\/strong\u003e\u003cp\u003eSold individually, so add the number your job needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLighting and downlight wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eJunction boxes with several wires\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSplitting one supply to several outputs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED strip and sign wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAppliance and fixture repairs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eTest benches and temporary joins\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eTurn the power off\u003c\/strong\u003e\u003cp\u003eIsolate the circuit and check it is dead before handling the wires.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the wire\u003c\/strong\u003e\u003cp\u003eRemove 11 mm of insulation without nicking the copper.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eLift, insert and close\u003c\/strong\u003e\u003cp\u003eRaise the lever fully, push the wire all the way in, then press the lever back down.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck it\u003c\/strong\u003e\u003cp\u003eLook through the housing to make sure the copper is fully in, then give the wire a gentle tug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Use copper wire only. Mains wiring must follow New Zealand electrical rules and be done or checked by a licensed electrician.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WAGO","offers":[{"title":"Default Title","offer_id":42982428541024,"sku":"WAGO-221-415","price":3.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/wago-221-415-hero.png?v=1790664306"},{"product_id":"wago-221-413-lever-connectors-3-pole-lever-nuts-32a-450v","title":"WAGO 221-413 Lever Connectors - 3 Pole Lever Nuts, 32A 450V","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThe WAGO 221-413 is a lever connector that joins up to three wires in one small clear block. Lift a lever, push the stripped wire in and close the lever to clamp it. You don't need any tools, and you can open it again later if the wiring changes. It takes solid, stranded and fine-stranded copper wire from 0.14 to 4 mm², so you can join flexible cable to solid house wire in the same connector. Any ports you don't need can be left empty. The clear housing lets you check that each wire is fully inserted. Sold individually, with quantity discounts when you buy more. Full manufacturer data is on \u003ca href=\"https:\/\/www.wago.com\/global\/installation-terminal-blocks-and-connectors\/splicing-connector-with-levers\/p\/221-413\" target=\"_blank\" rel=\"noopener nofollow\"\u003eWAGO's 221-413 product page\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eWAGO 221-413\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection points\u003c\/span\u003e\u003cstrong\u003e3\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRating (IEC)\u003c\/span\u003e\u003cstrong\u003e32A, 450V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRating (UL 486C)\u003c\/span\u003e\u003cstrong\u003e20A, 600V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSolid or stranded wire\u003c\/span\u003e\u003cstrong\u003e0.2 to 4 mm² (24 to 12 AWG)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFine-stranded wire\u003c\/span\u003e\u003cstrong\u003e0.14 to 4 mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStrip length\u003c\/span\u003e\u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMax operating temperature\u003c\/span\u003e\u003cstrong\u003e85°C (T85)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing\u003c\/span\u003e\u003cstrong\u003eClear polycarbonate, orange levers\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSize\u003c\/span\u003e\u003cstrong\u003e18.8 x 18.6 x 8.4 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWeight\u003c\/span\u003e\u003cstrong\u003e2.5 g\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eReusable\u003c\/span\u003e\u003cstrong\u003eYes, lift the lever to release\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/221-413-3-Pole-Lever-Connector-Datasheet-v1.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the 221-413 technical datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWAGO 221-413 3-way lever connector\u003c\/strong\u003e\u003cp\u003eSold individually, so add the number your job needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLighting and downlight wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eThree-way joins and branch connections\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED strip and sign wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eJoining flex to solid cable\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAppliance and fixture repairs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eTest benches and temporary joins\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eTurn the power off\u003c\/strong\u003e\u003cp\u003eIsolate the circuit and check it is dead before handling the wires.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the wire\u003c\/strong\u003e\u003cp\u003eRemove 11 mm of insulation without nicking the copper.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eLift, insert and close\u003c\/strong\u003e\u003cp\u003eRaise the lever fully, push the wire all the way in, then press the lever back down.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck it\u003c\/strong\u003e\u003cp\u003eLook through the housing to make sure the copper is fully in, then give the wire a gentle tug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Use copper wire only. Mains wiring must follow New Zealand electrical rules and be done or checked by a licensed electrician.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WAGO","offers":[{"title":"Default Title","offer_id":42984301232224,"sku":"WAGO-221-413","price":2.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/wago-221-413-hero-v2.png?v=1790664306"},{"product_id":"wago-221-412-lever-connectors-2-pole-lever-nuts-32a-450v","title":"WAGO 221-412 Lever Connectors - 2 Pole Lever Nuts, 32A 450V","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eThe WAGO 221-412 is a compact reusable lever connector for joining two copper conductors. Lift each orange lever, insert the stripped conductor fully, then close the lever. The clear housing makes the conductor position easy to inspect, and the connection can be reopened when wiring changes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eWAGO 221-412\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection points\u003c\/span\u003e\u003cstrong\u003e2\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRated current\u003c\/span\u003e\u003cstrong\u003e32 A\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRated voltage\u003c\/span\u003e\u003cstrong\u003e450 V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eRated impulse voltage\u003c\/span\u003e\u003cstrong\u003e4 kV\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTemperature class\u003c\/span\u003e\u003cstrong\u003eT85, max 85°C ambient\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSolid or stranded copper\u003c\/span\u003e\u003cstrong\u003e0.2 to 4 mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFine-stranded copper\u003c\/span\u003e\u003cstrong\u003e0.14 to 4 mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConductor range\u003c\/span\u003e\u003cstrong\u003eAWG 24 to 12\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eStrip length\u003c\/span\u003e\u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eDimensions\u003c\/span\u003e\u003cstrong\u003e18.30 x 13.00 x 8.15 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eApproximate weight\u003c\/span\u003e\u003cstrong\u003e1.71 g\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/221-412-2-Pole-Lever-Connector-Datasheet-v2.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the WAGO 221-412 technical datasheet PDF\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWAGO 221-412 two-conductor lever connector\u003c\/strong\u003e\u003cp\u003eSold individually, so add the quantity your project needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLighting and fixture wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eJoining stranded flex to solid copper wire\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED and sign connections\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRepairs, extensions and prototyping\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eIsolate power\u003c\/strong\u003e\u003cp\u003eDisconnect and verify power is off before handling conductors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the conductor\u003c\/strong\u003e\u003cp\u003eRemove 11 mm of insulation without nicking the copper.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eLift and insert\u003c\/strong\u003e\u003cp\u003eRaise the lever fully and push the conductor all the way into the port.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eClose and check\u003c\/strong\u003e\u003cp\u003eLower the lever, inspect the conductor through the housing, then gently tug-check the connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Use copper conductors only. Mains installation must follow New Zealand wiring rules and be completed or checked by a suitably qualified person.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WAGO","offers":[{"title":"Default Title","offer_id":42984307261536,"sku":"WAGO-221-2P","price":1.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/wago-221-412-hero.png?v=1784702214"},{"product_id":"m20-cable-gland-ip68-waterproof-nylon-6-12mm-cable","title":"M20 Cable Gland - IP68 Waterproof Nylon, 6-12mm Cable","description":"\u003cstyle\u003e.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6} .nznpd,.nznpd *{box-sizing:border-box} .nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65} .nznpd strong{color:var(--ink)} .nznpd a{color:var(--od);font-weight:600} .nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6;max-width:none} .nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px} .nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45} .nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center} .nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px} .nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)} .nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px} .nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px} .nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center} .nznpd__steps strong{display:block;font-size:14px} .nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45} .nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)} .nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px} .nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)} .nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden} .nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px} .nznpd__spec:nth-child(odd){background:var(--soft)} .nznpd__spec span{color:var(--mut)} .nznpd__spec strong{font-weight:700} .nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px} .nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center} .nznpd__included strong{display:block;font-size:15px;margin-bottom:3px} .nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px} .nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4} .nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55} @media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}}\u003c\/style\u003e\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eEvery sealed box eventually needs a cable going into it, and this is the fitting that lets one through without letting the weather back in. Drill a 20mm hole, push the gland through, do the lock nut up on the inside, then run your cable and tighten the dome nut. That squeezes a rubber insert down onto the cable so it seals and grips at the same time, which means the joint inside the box never takes the strain if someone pulls on the lead. It suits round cable from 6mm up to 12mm across, so it covers most flex, low voltage runs and sensor leads. Black nylon, lock nut and panel gasket in the pack, sold as singles so you buy exactly what the enclosure needs.\u003c\/p\u003e\n\u003cbr\u003e\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eM20 x 1.5 thread, drops into a 20mm panel hole\u003c\/li\u003e\n\u003cli\u003eSuits round cable 6mm to 12mm outside diameter\u003c\/li\u003e\n\u003cli\u003eRated IP68 once it is fitted and tightened properly\u003c\/li\u003e\n\u003cli\u003eLock nut and panel gasket included\u003c\/li\u003e\n\u003cli\u003eClamps the cable, so it doubles as strain relief\u003c\/li\u003e\n\u003cli\u003eNylon body, moulded CE and M20X1.5 markings\u003c\/li\u003e\n\u003cli\u003eRated -40C to +100C\u003c\/li\u003e\n\u003cli\u003e27mm across the flats, spanner or hand tight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eM20 compression cable gland with lock nut and gasket\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eThread\u003c\/span\u003e\u003cstrong\u003eM20 x 1.5mm pitch\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eThread length\u003c\/span\u003e\u003cstrong\u003e9mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePanel hole required\u003c\/span\u003e\u003cstrong\u003e20mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCable range\u003c\/span\u003e\u003cstrong\u003e6-12mm outside diameter\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eIngress protection\u003c\/span\u003e\u003cstrong\u003eIP68 when correctly fitted and tightened\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOperating temperature\u003c\/span\u003e\u003cstrong\u003e-40C to +100C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBody material\u003c\/span\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSeals\u003c\/span\u003e\u003cstrong\u003eRubber sealing insert plus separate panel gasket\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eColour\u003c\/span\u003e\u003cstrong\u003eBlack\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWrench size\u003c\/span\u003e\u003cstrong\u003e27mm across the flats (dome nut)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMarkings on this stock\u003c\/span\u003e\u003cstrong\u003eCE and M20X1.5 moulded into the body\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFixing method\u003c\/span\u003e\u003cstrong\u003eNut fixation, lock nut behind the panel\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eSingle assembled gland\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1x\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eM20 cable gland, assembled\u003c\/strong\u003e\u003cp\u003eMain body, dome nut with rubber sealing insert, panel gasket and lock nut. Sold individually - add the quantity your enclosure needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eOutdoor junction boxes \u0026amp; enclosures\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLED driver \u0026amp; power supply housings\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e3D printer \u0026amp; CNC control cabinets\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCamera, sensor \u0026amp; irrigation housings\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eCaravan, trailer \u0026amp; marine wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003ePump, solar \u0026amp; garden lighting runs\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003csection class=\"nznpd__block\"\u003e\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to fit it\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eDrill a 20mm hole\u003c\/strong\u003e\u003cp\u003eA step drill or 20mm hole saw in the enclosure wall. Deburr it so the gasket sits flat.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMount the gland\u003c\/strong\u003e\u003cp\u003eSlide the gasket onto the thread, push it through from the outside, then run the lock nut on from the inside and tighten.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eRun the cable\u003c\/strong\u003e\u003cp\u003eBack the dome nut off, feed the cable through, and leave a little slack inside the box.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSeal it up\u003c\/strong\u003e\u003cp\u003eTighten the dome nut with a 27mm spanner until the insert closes onto the cable, then give the cable a tug to check it is held.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\u003c\/section\u003e\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e the IP68 rating depends on the install - the cable needs to sit inside the 6-12mm range, the gasket needs a clean flat face to seal against, and the dome nut needs to be properly tightened. This is a mechanical cable entry rather than an electrical connector, so it carries no current or voltage rating of its own, and any mains work still needs to follow NZ wiring rules and be done or checked by a registered electrician. Every order is checked before it ships from our Te Awamutu stock.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":42991650078816,"sku":"CG-M20-BK","price":1.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/m20-cable-gland-hero.png?v=1784942054"},{"product_id":"insulated-butt-connectors-blue-crimp-butt-splice-1-5-2-5mm-16-14-awg","title":"Insulated Butt Connectors - Blue Crimp Butt Splice (1.5-2.5mm² \/ 16-14 AWG)","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__tiers{display:grid;grid-template-columns:repeat(4,1fr);gap:10px}\n.nznpd__tier{border:2px solid var(--line);border-radius:12px;background:var(--soft);padding:14px;text-align:center}\n.nznpd__tier strong{display:block;font-size:15px;color:var(--ink)}\n.nznpd__tier span{font-size:12px;color:var(--mut)}\n.nznpd__tier b{display:block;margin-top:6px;font-size:13px;font-weight:800;color:var(--o)}\n.nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px}\n.nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center;font-size:13px}\n.nznpd__included strong{display:block;font-size:15px;margin-bottom:3px}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__tiers{grid-template-columns:repeat(2,1fr)}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA \u003cstrong\u003ebutt connector\u003c\/strong\u003e joins two wires end to end in one crimp, with no twisting, no tape and no exposed copper. Push a stripped wire into each end, crimp both sides, and the tin-plated brass barrel clamps the strands while the \u003cstrong\u003ePVC sleeve\u003c\/strong\u003e covers the whole join. This is the \u003cstrong\u003eblue BV2 size\u003c\/strong\u003e, which takes \u003cstrong\u003e1.5 to 2.5 mm² wire (16 to 14 AWG)\u003c\/strong\u003e, the most common gauge in 12V automotive, trailer, marine and general low-voltage work. Sold loose by the piece so you buy the exact number your job needs.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003eJoins two wires end to end in a single crimp\u003c\/li\u003e\n\u003cli\u003eTin-plated brass barrel for a low-resistance join\u003c\/li\u003e\n\u003cli\u003eFully insulating PVC sleeve, no exposed metal\u003c\/li\u003e\n\u003cli\u003eColour coded blue for 1.5 to 2.5 mm² (16 to 14 AWG)\u003c\/li\u003e\n\u003cli\u003e600V insulation, rated to 75°C\u003c\/li\u003e\n\u003cli\u003eFunnel-shaped ends make the wire easy to feed in\u003c\/li\u003e\n\u003cli\u003eBuy more, pay less with automatic bulk pricing\u003c\/li\u003e\n\u003cli\u003eStocked and dispatched fast from NZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eBuy more, pay less\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__tiers\"\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e5+\u003c\/strong\u003e\u003cspan\u003eminimum order\u003c\/span\u003e\u003cb\u003eBase price\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e25+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 15%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e50+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 25%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e100+\u003c\/strong\u003e\u003cspan\u003econnectors\u003c\/span\u003e\u003cb\u003eSave 35%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eFully insulated butt splice connector (BV2)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eColour \/ size\u003c\/span\u003e\u003cstrong\u003eBlue\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire size\u003c\/span\u003e\u003cstrong\u003e1.5 to 2.5 mm² (16 to 14 AWG)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTerminal body\u003c\/span\u003e\u003cstrong\u003eBrass\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePlating\u003c\/span\u003e\u003cstrong\u003eTin\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation\u003c\/span\u003e\u003cstrong\u003ePVC sleeve, fully insulated\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation voltage\u003c\/span\u003e\u003cstrong\u003e600V\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaximum temperature\u003c\/span\u003e\u003cstrong\u003e75°C\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOverall length\u003c\/span\u003e\u003cstrong\u003eApprox. 26 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire entry bore\u003c\/span\u003e\u003cstrong\u003eApprox. 2.3 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCurrent handling\u003c\/span\u003e\u003cstrong\u003eSet by the wire you crimp, not the connector\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMarkings\u003c\/span\u003e\u003cstrong\u003ePlain blue sleeve, no printed part markings\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection\u003c\/span\u003e\u003cstrong\u003eCrimp, using an insulated terminal crimping tool\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eIndividual connectors, 5 piece minimum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat you'll receive\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e5+\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLoose blue insulated butt connectors\u003c\/strong\u003e\n\u003cp\u003eSold per piece with a 5 connector minimum, so you can set the exact quantity your job needs at checkout. Bulk discounts apply automatically at 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRepairing a cut or broken 12V wire\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eExtending a loom, sensor or light lead\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBoat, trailer and caravan wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSolar, battery and LED runs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSpeaker and accessory wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAny permanent join you don't want to solder\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to crimp them\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip both wires\u003c\/strong\u003e\u003cp\u003eRemove about 6 to 8 mm of insulation from the end of each wire and twist the strands together.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eInsert one wire into each end\u003c\/strong\u003e\u003cp\u003eFeed the bare copper in until it reaches the middle of the barrel and the wire insulation sits against the sleeve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp both ends\u003c\/strong\u003e\u003cp\u003eSqueeze each end with an insulated terminal crimping tool, using the blue jaw position.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eTug to test\u003c\/strong\u003e\u003cp\u003ePull firmly on both wires. A good crimp will not move. If a wire slides out, cut it back and redo it with a fresh connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e match the connector colour to your wire gauge for the best crimp, blue being 1.5 to 2.5 mm². These are insulated but not sealed, so for wet or exposed locations either slip adhesive lined heat shrink over the finished join or use our solder seal connectors instead. Stocked and dispatched fast from our Te Awamutu base, overseas prices without the overseas wait.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":43000223858784,"sku":"BUTT-BLU","price":0.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/insulated-butt-connector-blue.png?v=1785234416"},{"product_id":"insulated-female-spade-terminals-red-6-3mm-crimp-quick-connect-0-5-1-5mm-22-16-awg","title":"Insulated Female Spade Terminals - Red 6.3mm Crimp Quick Connect (0.5-1.5mm² \/ 22-16 AWG)","description":"\u003cstyle\u003e\n.nznpd{--o:#F57C00;--od:#E65100;--ink:#0F172A;--mut:#5b6573;--line:#E8ECF0;--soft:#F7F8FA;max-width:1120px;margin:0 auto;color:var(--ink);font-family:inherit;line-height:1.6}\n.nznpd,.nznpd *{box-sizing:border-box}\n.nznpd p{margin:0;color:var(--mut);font-size:15px;line-height:1.65}\n.nznpd strong{color:var(--ink)}\n.nznpd__intro{font-size:16px;color:var(--ink);font-weight:500;line-height:1.6}\n.nznpd__checks{list-style:none;padding:0;margin:22px 0 0;display:grid;grid-template-columns:repeat(2,1fr);column-gap:26px;row-gap:13px}\n.nznpd__checks li{display:flex;gap:11px;align-items:flex-start;font-size:15px;color:var(--ink);line-height:1.45}\n.nznpd__checks li::before{content:\"\\2713\";flex:0 0 auto;width:21px;height:21px;margin-top:1px;border-radius:999px;background:#FFF3E8;color:var(--o);font-size:12px;font-weight:900;line-height:21px;text-align:center}\n.nznpd__block{margin-top:36px;padding-top:30px;border-top:1px solid var(--line)}\n.nznpd__h{margin:0 0 28px;font-size:1.15rem;font-weight:800;letter-spacing:-.02em;color:var(--ink);display:flex;align-items:center;gap:10px}\n.nznpd__h::before{content:\"\";flex:0 0 auto;width:20px;height:3px;border-radius:2px;background:var(--o)}\n.nznpd__specs{border:2px solid var(--line);border-radius:12px;overflow:hidden}\n.nznpd__spec{display:grid;grid-template-columns:minmax(150px,.7fr) 1fr;gap:18px;padding:12px 16px;font-size:14px}\n.nznpd__spec:nth-child(odd){background:var(--soft)}\n.nznpd__spec span{color:var(--mut)}\n.nznpd__spec strong{font-weight:700}\n.nznpd__tiers{display:grid;grid-template-columns:repeat(4,1fr);gap:10px}\n.nznpd__tier{border:2px solid var(--line);border-radius:12px;background:var(--soft);padding:14px;text-align:center}\n.nznpd__tier strong{display:block;font-size:15px;color:var(--ink)}\n.nznpd__tier span{font-size:12px;color:var(--mut)}\n.nznpd__tier b{display:block;margin-top:6px;font-size:13px;font-weight:800;color:var(--o)}\n.nznpd__included{display:flex;gap:16px;align-items:center;border:2px solid var(--line);border-radius:16px;background:var(--soft);padding:18px 20px}\n.nznpd__qty{flex:0 0 auto;width:46px;height:46px;border-radius:12px;background:#FFF3E8;color:var(--o);font-weight:800;display:flex;align-items:center;justify-content:center;font-size:13px}\n.nznpd__included strong{display:block;font-size:15px;margin-bottom:3px}\n.nznpd__uses{display:grid;grid-template-columns:repeat(2,1fr);gap:10px}\n.nznpd__use{padding:13px 14px;background:var(--soft);border-left:3px solid var(--o);border-radius:0 10px 10px 0;font-size:14px;color:var(--ink);line-height:1.4}\n.nznpd__qs{background:linear-gradient(170deg,#FFF9F3,#FFF1E6);border:2px solid #FCE0C6;border-radius:16px;padding:22px}\n.nznpd__qs h3{margin:0 0 16px;font-size:12px;font-weight:800;letter-spacing:.09em;text-transform:uppercase;color:var(--od)}\n.nznpd__steps{list-style:none;counter-reset:s;padding:0;margin:0;display:grid;gap:14px}\n.nznpd__steps li{display:grid;grid-template-columns:27px 1fr;gap:12px}\n.nznpd__steps li::before{counter-increment:s;content:counter(s);width:27px;height:27px;border-radius:999px;background:#fff;border:2px solid #FCE0C6;color:var(--od);font-weight:800;font-size:13px;display:flex;align-items:center;justify-content:center}\n.nznpd__steps strong{display:block;font-size:14px}\n.nznpd__steps p{font-size:13px;margin-top:2px;line-height:1.45}\n.nznpd p.nznpd__note{margin-top:16px;background:var(--soft);border:2px solid var(--line);border-radius:12px;padding:14px 16px;font-size:13.5px;color:var(--mut);line-height:1.55}\n@media (max-width:749px){.nznpd__checks{grid-template-columns:1fr}.nznpd__uses{grid-template-columns:1fr}.nznpd__spec{grid-template-columns:1fr;gap:2px}.nznpd__tiers{grid-template-columns:repeat(2,1fr)}}\n\u003c\/style\u003e\n\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA \u003cstrong\u003efemale spade terminal\u003c\/strong\u003e is the quick-disconnect end of a wire. Crimp it on, then push it straight onto the \u003cstrong\u003e6.3 mm male blade\u003c\/strong\u003e of a switch, relay, rocker, fuse holder or battery terminal, and pull it off again whenever you need to. This is the \u003cstrong\u003ered size\u003c\/strong\u003e, which takes \u003cstrong\u003e0.5 to 1.5 mm² wire (22 to 16 AWG)\u003c\/strong\u003e, the gauge most 12V switches, LED runs, sensors and accessory circuits use. The PVC sleeve wraps the barrel and the blade, so nothing metal is left exposed once it is pushed on. Sold loose by the piece, so you buy the exact number your job needs.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"nznpd__checks\"\u003e\n\u003cli\u003ePush on and pull off, no tools once it is crimped\u003c\/li\u003e\n\u003cli\u003eFits standard 6.3 mm (1\/4 inch) male blades\u003c\/li\u003e\n\u003cli\u003eTin-plated brass body for a low-resistance contact\u003c\/li\u003e\n\u003cli\u003eFully insulating PVC sleeve over the barrel and the blade\u003c\/li\u003e\n\u003cli\u003eColour coded red for 0.5 to 1.5 mm² (22 to 16 AWG)\u003c\/li\u003e\n\u003cli\u003eFunnel-shaped wire entry makes the strands easy to feed in\u003c\/li\u003e\n\u003cli\u003eBuy more, pay less with automatic bulk pricing\u003c\/li\u003e\n\u003cli\u003eStocked and dispatched fast from NZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eBuy more, pay less\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__tiers\"\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e10+\u003c\/strong\u003e\u003cspan\u003eminimum order\u003c\/span\u003e\u003cb\u003eBase price\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e25+\u003c\/strong\u003e\u003cspan\u003eterminals\u003c\/span\u003e\u003cb\u003eSave 15%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e50+\u003c\/strong\u003e\u003cspan\u003eterminals\u003c\/span\u003e\u003cb\u003eSave 25%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__tier\"\u003e\n\u003cstrong\u003e100+\u003c\/strong\u003e\u003cspan\u003eterminals\u003c\/span\u003e\u003cb\u003eSave 35%\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eType\u003c\/span\u003e\u003cstrong\u003eFully insulated female spade terminal, quick disconnect\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eColour \/ size\u003c\/span\u003e\u003cstrong\u003eRed\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire size\u003c\/span\u003e\u003cstrong\u003e0.5 to 1.5 mm² (22 to 16 AWG)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMating blade\u003c\/span\u003e\u003cstrong\u003e6.3 x 0.8 mm (1\/4 inch) male spade, the common 250 series size\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTerminal body\u003c\/span\u003e\u003cstrong\u003eBrass\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePlating\u003c\/span\u003e\u003cstrong\u003eTin\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation\u003c\/span\u003e\u003cstrong\u003ePVC sleeve, fully insulated over the barrel and the blade\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOverall length\u003c\/span\u003e\u003cstrong\u003eApprox. 22 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCurrent handling\u003c\/span\u003e\u003cstrong\u003eSet by the wire you crimp, not the terminal\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMarkings\u003c\/span\u003e\u003cstrong\u003ePlain red sleeve, no printed part numbers or certification marks\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection\u003c\/span\u003e\u003cstrong\u003eCrimp, using an insulated terminal crimping tool\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSold as\u003c\/span\u003e\u003cstrong\u003eIndividual terminals, 10 piece minimum\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat you'll receive\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e10+\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLoose red insulated female spade terminals\u003c\/strong\u003e\n\u003cp\u003eSold per piece with a 10 terminal minimum, so you can set the exact quantity your job needs at checkout. Bulk discounts apply automatically at 25, 50 and 100 pieces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cbr\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eWiring switches, rockers and push buttons\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRelay, fuse holder and horn connections\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomotive, trailer and caravan looms\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eSpeaker and amplifier terminals\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBattery, solar and LED accessory runs\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAnything you want to be able to unplug later\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eHow to crimp them\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip the wire\u003c\/strong\u003e\u003cp\u003eTake about 5 to 6 mm of insulation off the end and twist the strands together so none stray.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFeed it into the barrel\u003c\/strong\u003e\u003cp\u003ePush the bare copper into the back of the terminal until the wire insulation sits against the sleeve and no strands poke out the side.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp the barrel\u003c\/strong\u003e\u003cp\u003eSqueeze it with an insulated terminal crimping tool, using the red jaw position.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePush it on and tug test\u003c\/strong\u003e\u003cp\u003eSlide the terminal onto the 6.3 mm male blade until it clicks home, then pull firmly on the wire. A good crimp will not move.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eGood to know:\u003c\/strong\u003e match the terminal colour to your wire gauge for the best crimp, red being 0.5 to 1.5 mm². Check the blade on your switch or relay before ordering, since 4.8 mm and 2.8 mm blades also exist and a 6.3 mm terminal will not hold on them properly. These are insulated but not sealed, so for engine bays or anywhere exposed slip adhesive lined heat shrink over the finished crimp. Stocked and dispatched fast from our Te Awamutu base, overseas prices without the overseas wait.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":43002993410144,"sku":"SPD-FEM-RED","price":0.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/insulated-female-spade-red.png?v=1785399641"},{"product_id":"insulated-bootlace-ferrules-older-colours","title":"Insulated Bootlace Ferrules - Cord End Terminals 0.5-4mm², Older Colours","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__note\" style=\"margin-top:0\"\u003e\u003cstrong\u003eEnd-of-line colour run.\u003c\/strong\u003e This is our earlier collar-colour set. The ferrules are brand new, and the size and collar colour for each option are shown below. The current range uses different collar colours.\u003c\/p\u003e\n\u003cp class=\"nznpd__intro\"\u003eInsulated bootlace ferrules, also called cord end terminals, crimp onto the stripped end of stranded wire to give a clean solid pin that will not fray, splay or work loose. They are the proper way to land stranded cable into a screw terminal, and DIN-rail blocks, breakers, contactors and terminal strips all hold a ferrule far more reliably than bare strands. Four sizes in this older colour run, sold per piece so you buy only what the job needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSizes in this older colour run\u003c\/h3\u003e\n\u003ctable class=\"nznpd__tbl\"\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eWire\u003c\/th\u003e\n\u003cth\u003eAWG\u003c\/th\u003e\n\u003cth\u003eCollar colour\u003c\/th\u003e\n\u003cth\u003eStock\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE0508\u003c\/td\u003e\n\u003ctd\u003e0.5mm²\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE1008\u003c\/td\u003e\n\u003ctd\u003e1.0mm²\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE1508\u003c\/td\u003e\n\u003ctd\u003e1.5mm²\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE4009\u003c\/td\u003e\n\u003ctd\u003e4.0mm²\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003ctd\u003e45 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSingle insulated bootlace ferrule in your chosen size\u003c\/strong\u003e\n\u003cp\u003eSold per piece with a minimum order of 5. Mix sizes freely across the order, and the bulk tiers apply to your total ferrule count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eControl panels and DIN-rail wiring\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eBreakers, contactors and terminal blocks\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e3D printer, CNC and automation builds\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAutomotive, marine and 12\/24V systems\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAudio, lighting and power distribution\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eAny stranded wire going into a screw terminal\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eCrimping \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMatch the ferrule to the wire\u003c\/strong\u003e\u003cp\u003eGo by the mm² or AWG figure of your conductor, not by the collar colour. On this run the colours are the old ones and do not line up with the colours on our current listing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eStrip to the barrel length\u003c\/strong\u003e\u003cp\u003eTake off just enough insulation that the copper fills the metal barrel and the strands stop at the far end without poking out past it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eTwist and insert\u003c\/strong\u003e\u003cp\u003eGive the strands a light twist so none splay off, then push the wire in until the insulation meets the plastic collar.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp with a ferrule tool\u003c\/strong\u003e\u003cp\u003eUse a bootlace ferrule crimper, which forms a square or hex crimp along the barrel. A standard spade or ring terminal crimper will crush the barrel flat and will not hold properly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck the pull\u003c\/strong\u003e\u003cp\u003eTug the wire firmly. A good crimp will not move. Land the finished pin in the terminal and torque the screw down onto the barrel, not onto the collar.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Treat the collar colour on this run as cosmetic and go by the size in the variant name, because these colours do not match the ones shown on our current bootlace ferrule listing. The 1.5mm² E1508 in this run also has a slightly larger collar and body than the E1508 we stock now, so check the available space first if you are landing into a tightly packed terminal block. All four sizes still take the same wire they always did.\u003c\/p\u003e\n\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/FERRULE-QuickStart.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the ferrule Quick Start guide (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eQuick start guide - crimp sizes and colour codes\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e","brand":"NZN Electronics","offers":[{"title":"0.5mm² · 22 AWG (E0508, White)","offer_id":43079793475680,"sku":"FER-E0508-CL","price":0.1,"currency_code":"NZD","in_stock":true},{"title":"1.0mm² · 18 AWG (E1008, Grey)","offer_id":43079793508448,"sku":"FER-E1008-CL","price":0.12,"currency_code":"NZD","in_stock":true},{"title":"1.5mm² · 16 AWG (E1508, Blue)","offer_id":43079793541216,"sku":"FER-E1508-CL","price":0.13,"currency_code":"NZD","in_stock":true},{"title":"4.0mm² · 12 AWG (E4009, Grey)","offer_id":43079793573984,"sku":"FER-E4009-CL","price":0.18,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/E0508_Bootlace_Ferrule_White_Clearance.png?v=1787542573"},{"product_id":"fdd1-25-250-female-spade-terminals-red","title":"FDD1.25-250 Female Spade Terminals - Red 6.35mm","description":"\u003cdiv class=\"nznpd\"\u003e\n  \u003cdiv class=\"nznpd__lead\"\u003e\n    \u003cp class=\"nznpd__intro\"\u003eThe FDD1.25-250 female spade terminal makes a removable wire connection to a 6.35 x 0.8 mm male blade tab. Its red sleeve covers the crimp barrel, with a conductor range of 0.5-1.5 mm² for small wiring and repair projects.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__specs\"\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eModel\u003c\/span\u003e\u003cstrong\u003eFDD1.25-250\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection type\u003c\/span\u003e\u003cstrong\u003eFemale spade quick disconnect\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMating male tab\u003c\/span\u003e\u003cstrong\u003e6.35 x 0.8 mm, width x thickness\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConductor cross-section\u003c\/span\u003e\u003cstrong\u003e0.5-1.5 mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOverall length\u003c\/span\u003e\u003cstrong\u003e21 mm nominal\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eReceptacle width\u003c\/span\u003e\u003cstrong\u003e7.4 mm nominal\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulation coverage\u003c\/span\u003e\u003cstrong\u003eRed sleeve over the wire barrel\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire termination\u003c\/span\u003e\u003cstrong\u003eCrimp\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePurchase unit\u003c\/span\u003e\u003cstrong\u003eOne terminal\u003c\/strong\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__ds\"\u003e\n      \u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/nzn-fdd125-250-female-spade-terminal-datasheet.pdf?v=1788935900\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the FDD1.25-250 female spade terminal datasheet (PDF)\"\u003e\n        \u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n        \u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n        \u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n      \u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__included\"\u003e\n      \u003cdiv class=\"nznpd__qty\"\u003e1×\u003c\/div\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eFDD1.25-250 red female spade terminal\u003c\/strong\u003e\u003cp\u003eSold individually. Minimum order: 5 terminals. Your selected quantity is supplied together.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__uses\"\u003e\n      \u003cdiv class=\"nznpd__use\"\u003eRemovable wire-to-tab connections\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003eReplacing a damaged female spade terminal\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003ePreparing wiring for correctly sized blade tabs\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003cdiv class=\"nznpd__qs\"\u003e\n      \u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n      \u003col class=\"nznpd__steps\"\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck the fit with power disconnected\u003c\/strong\u003e\u003cp\u003eMatch the male tab's width and thickness to 6.35 x 0.8 mm. Select wire with a conductor cross-section of 0.5-1.5 mm² and confirm its insulation fits the sleeve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePrepare the wire and crimping tool\u003c\/strong\u003e\u003cp\u003eUse a tool and die intended for insulated terminals and your wire size. Strip to the wire-barrel length without cutting strands, then insert the conductor fully.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp and inspect\u003c\/strong\u003e\u003cp\u003eCrimp the wire barrel according to the tool instructions. Check for escaped strands, damaged insulation or a distorted receptacle. Confirm that the wire is secure and the terminal seats firmly on the tab.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eProtect the exposed contact\u003c\/strong\u003e\u003cp\u003eThe metal receptacle remains uncovered. Fit suitable insulation or an enclosure where it could touch adjacent conductors or be touched during use. Disconnect power before fitting or removing the terminal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n      \u003c\/ol\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":43141334073440,"sku":"SPD-FEM-RED-FDD","price":0.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/fdd125-250-red-female-spade-terminal-hero.png?v=1788936324"},{"product_id":"blue-insulated-ring-terminal-m5-rv2-5-16-14-awg","title":"Blue Insulated Ring Terminal M5 RV2-5 - 16-14 AWG","description":"\u003cdiv class=\"nznpd\"\u003e\n  \u003cdiv class=\"nznpd__lead\"\u003e\n    \u003cp class=\"nznpd__intro\"\u003eThe blue \u003cstrong\u003eRV2-5 insulated ring terminal\u003c\/strong\u003e is a crimp-on wire terminal for \u003cstrong\u003eM5\u003c\/strong\u003e studs, screws and posts. It accepts \u003cstrong\u003e1.5-2.5 mm² \/ 16-14 AWG\u003c\/strong\u003e conductors and has a stated maximum current of \u003cstrong\u003e27 A\u003c\/strong\u003e. The copper ring and insulating sleeve make it a practical choice for tidy, removable wire-to-stud connections.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__specs\"\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eVariant\u003c\/span\u003e\u003cstrong\u003eM5 \/ RV2-5\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnection type\u003c\/span\u003e\u003cstrong\u003eInsulated ring crimp terminal\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eColour\u003c\/span\u003e\u003cstrong\u003eBlue\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eTerminal material\u003c\/span\u003e\u003cstrong\u003eCopper\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInsulating material thickness\u003c\/span\u003e\u003cstrong\u003e0.5 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire range\u003c\/span\u003e\u003cstrong\u003e1.5-2.5 mm²\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire gauge\u003c\/span\u003e\u003cstrong\u003e16-14 AWG\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMaximum current\u003c\/span\u003e\u003cstrong\u003e27 A\u003c\/strong\u003e\n\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire termination\u003c\/span\u003e\u003cstrong\u003eCrimp\u003c\/strong\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__ds\"\u003e\n      \u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/nzn-insulated-ring-terminal-m5-rv2-5-datasheet.pdf\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the RV2-5 M5 insulated ring terminal datasheet (PDF)\"\u003e\n        \u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n        \u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n        \u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n      \u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__included\"\u003e\n      \u003cdiv class=\"nznpd__qty\"\u003e1 x\u003c\/div\u003e\n      \u003cdiv\u003e\n\u003cstrong\u003eBlue insulated RV2-5 ring terminal\u003c\/strong\u003e\u003cp\u003eSold individually. Minimum order: 5 terminals. Your selected quantity is supplied together.\u003c\/p\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n    \u003cdiv class=\"nznpd__uses\"\u003e\n      \u003cdiv class=\"nznpd__use\"\u003eM5 stud, screw and post connections\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003eBattery and earth wiring\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003eControl panels and enclosures\u003c\/div\u003e\n      \u003cdiv class=\"nznpd__use\"\u003eAutomotive and project wiring\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"nznpd__block\"\u003e\n    \u003cdiv class=\"nznpd__qs\"\u003e\n      \u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n      \u003col class=\"nznpd__steps\"\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConfirm the fit with power disconnected\u003c\/strong\u003e\u003cp\u003eMatch the terminal to 1.5-2.5 mm² \/ 16-14 AWG wire and M5 fastening hardware before starting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePrepare the conductor\u003c\/strong\u003e\u003cp\u003eStrip only as much insulation as the crimp-tool instructions require. Keep the strands together and insert the conductor fully into the barrel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCrimp and inspect\u003c\/strong\u003e\u003cp\u003eUse a tool and die intended for insulated terminals and the selected wire size. Check the sleeve for damage, confirm no strands have escaped and perform a gentle tug test.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n        \u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFit the ring\u003c\/strong\u003e\u003cp\u003ePlace the ring over the M5 stud, screw or post and tighten the hardware according to the equipment instructions. Check clearance before restoring power.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n      \u003c\/ol\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003cp class=\"nznpd__note\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 27 A is the supplied maximum-current specification for this terminal variant. Actual safe current depends on the conductor, crimp quality, temperature, installation and the rest of the wiring system.\u003c\/p\u003e\n\u003c\/div\u003e\n\r\n","brand":"NZN Electronics","offers":[{"title":"M5 \/ RV2-5","offer_id":43144135901280,"sku":"RT-BLU-M5","price":0.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/rv2-5-blue-ring-terminal-hero.png?v=1789087480"}],"url":"https:\/\/www.nznelectronics.co.nz\/collections\/power-wiring.oembed","provider":"NZN Electronics","version":"1.0","type":"link"}