{"product_id":"100mm-male-to-male-servo-lead-jr-futaba","title":"100mm Male to Male Servo Lead - JR\/Futaba Universal","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA male to male servo lead joins two connectors that both need a plug. This one is 100mm long and has the same small plug a servo has on both ends, with metal sockets inside. Each end pushes into the open receptacle end of a servo extension or Y lead, or straight onto three header pins on a receiver or servo driver board.\u003c\/p\u003e\n\u003cp class=\"nznpd__intro\"\u003eYou can use it to join two extension leads end to end, to add an extension to a Y lead, or to link a receiver to a flight controller when both have header pins. The plugs have no polarity tab, so they fit JR, Futaba and Hitec style receptacles, but they also fit either way round. Line up the colours at each join: black goes to black or brown, red to red, and white to white, orange or yellow.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eEnds\u003c\/span\u003e\u003cstrong\u003eServo plug at both ends (RC \"male\")\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePlugs into\u003c\/span\u003e\u003cstrong\u003eJR, Futaba and Hitec style receptacles, 3-pin headers\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePositions and pitch\u003c\/span\u003e\u003cstrong\u003e3 positions, 2.54mm (0.1in)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire colours\u003c\/span\u003e\u003cstrong\u003eBlack (-), red (+), white (signal)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWiring\u003c\/span\u003e\u003cstrong\u003eStraight through, same order both ends\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eLength\u003c\/span\u003e\u003cstrong\u003e100mm nominal, plug to plug\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eHousing\u003c\/span\u003e\u003cstrong\u003eUnkeyed, no polarity tab\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eContacts\u003c\/span\u003e\u003cstrong\u003eCrimped sockets with a latch window each\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eIn the box\u003c\/span\u003e\u003cstrong\u003e1 lead\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003cdetails class=\"nznpd__figbox\" open\u003e\u003csummary\u003eWiring diagram\u003cspan class=\"nznpd__codelang\"\u003eServo lead\u003c\/span\u003e\u003c\/summary\u003e\u003cfigure class=\"nznpd__fig\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/CBL-SERVO-JR-MM-100-wiring-wide.png?v=1794170470\" target=\"_blank\" rel=\"noopener\"\u003e\u003cpicture\u003e\u003csource media=\"(min-width: 600px)\" srcset=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/CBL-SERVO-JR-MM-100-wiring-wide.png?v=1794170470\" width=\"920\" height=\"680\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/CBL-SERVO-JR-MM-100-wiring.png?v=1794170470\" alt=\"The 100mm lead joins two receptacle ends, or two sets of header pins. Black goes to the negative pin, red to positive and white to signal at both ends.\" width=\"690\" height=\"860\" loading=\"lazy\"\u003e\u003c\/picture\u003e\u003c\/a\u003e\u003cfigcaption\u003eTap the drawing to open it full size.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003c\/details\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSwitch the power off\u003c\/strong\u003e\u003cp\u003eUnplug the battery or USB before you join or remove any servo lead.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eFind the signal pin on each side\u003c\/strong\u003e\u003cp\u003eOn a lead, the lightest wire is signal (white, orange or yellow), red is positive and the darkest is negative (black or brown). On a board, look for S, + and - or SIG, V+ and GND printed beside the pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePlug in the first end\u003c\/strong\u003e\u003cp\u003ePut the white wire on signal and the black wire on negative, then push until the plug sits fully home.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePlug in the other end the same way\u003c\/strong\u003e\u003cp\u003eThe wires run straight through, so the white wire must be on signal at both ends. Black on signal at one end means that plug is upside down.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck only one side feeds power\u003c\/strong\u003e\u003cp\u003eThe red wire joins the positive pins on both sides. If both sides have their own power, such as a receiver battery on one side and an ESC or flight controller BEC on the other, take the red wire out of one plug. Lift its little plastic latch with a pin, slide the wire out and tape over the bare contact.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eCheck it works\u003c\/strong\u003e\u003cp\u003ePower up and move the stick or run your test code. The servo should move as it did without the lead. If it does nothing, one plug is reversed or not pushed fully home.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":67686016516192,"sku":"CBL-SERVO-JR-MM-100","price":1.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/100mm-male-to-male-servo-lead-hero.png?v=1794171568","url":"https:\/\/www.nznelectronics.co.nz\/products\/100mm-male-to-male-servo-lead-jr-futaba","provider":"NZN Electronics","version":"1.0","type":"link"}