{"product_id":"futaba-servo-pigtail-lead-100mm-male","title":"100mm Futaba-Style Servo Pigtail Lead - Male Plug, 22 AWG","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eA short 100 mm servo lead with a Futaba-style male plug on one end and bare wire tips on the other. Use it to replace a damaged plug on a servo, ESC or sensor, or to make your own lead for a receiver or servo header. Solder or splice the free end to your device and the plug fits a standard 3-pin servo connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003ePlug\u003c\/span\u003e\u003cstrong\u003eFutaba-style male, 3-position keyed housing\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFits\u003c\/span\u003e\u003cstrong\u003e3-pin 2.54 mm servo headers and Futaba-style sockets\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eNominal length\u003c\/span\u003e\u003cstrong\u003e100 mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eWire colours\u003c\/span\u003e\u003cstrong\u003eWhite signal, red positive, black negative\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eCable form\u003c\/span\u003e\u003cstrong\u003eFlat 3-wire ribbon, 22 AWG supplier-listed\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eFree end\u003c\/span\u003e\u003cstrong\u003eShort bare stranded tips, ready to solder\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__included\"\u003e\n\u003cdiv class=\"nznpd__qty\"\u003e1 x\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e100 mm Futaba-style servo pigtail lead\u003c\/strong\u003e\u003cp\u003eOne male plug with a 100 mm flat white, red and black lead and bare tips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eReplacing a broken servo plug\u003c\/strong\u003e\u003cp\u003eCut off a cracked or damaged plug and solder this lead on in its place.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eESCs, sensors and lights\u003c\/strong\u003e\u003cp\u003eGive a bare-wired device a plug that fits a receiver channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003e\n\u003cstrong\u003eArduino and ESP32 servo headers\u003c\/strong\u003e\u003cp\u003eConnect your own wiring to the 3-pin servo rows on boards like the \u003ca href=\"https:\/\/www.nznelectronics.co.nz\/products\/nano-io-expansion-shield-v3-0-servo-sensor-breakout-board-arduino-nano-compatible-blue\"\u003eNano IO expansion shield\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePower off first\u003c\/strong\u003e\u003cp\u003eDisconnect the battery or supply before cutting or soldering any lead.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eMatch the colours\u003c\/strong\u003e\u003cp\u003eJoin white to the signal wire, red to positive and black to negative (ground) on your device. Check your device's own wire colours, as some use orange, red and brown instead.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSolder and insulate\u003c\/strong\u003e\u003cp\u003eSolder each joint and cover it with heat-shrink so no bare copper is left showing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePlug in the right way round\u003c\/strong\u003e\u003cp\u003eOn a receiver or servo header, black goes to the negative or ground pin, usually the outer edge. Check the markings before powering up.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003c\/div\u003e\n","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":67617189658720,"sku":"CBL-SERVO-PIG-FUT-100","price":3.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/01-100mm-futaba-servo-pigtail-hero.png?v=1791086481","url":"https:\/\/www.nznelectronics.co.nz\/products\/futaba-servo-pigtail-lead-100mm-male","provider":"NZN Electronics","version":"1.0","type":"link"}