{"product_id":"mt3608-usb-c-boost-converter-module","title":"MT3608 USB-C Adjustable Boost Converter Module, 2-24V Step Up","description":"\u003cdiv class=\"nznpd\"\u003e\n\u003cdiv class=\"nznpd__lead\"\u003e\n\u003cp class=\"nznpd__intro\"\u003eAn adjustable step-up converter built on the MT3608 chip, with a USB-C socket for power in. Plug it into a USB-A port or charger with a USB-A to USB-C lead and it lifts the 5V to whatever you set with the trimmer, such as 9V or 12V. You can also feed the VIN pads from a battery or other DC supply between 2V and 24V. The output is always higher than the input, so it will not lower a voltage. From a 5V supply, plan on up to about 5W at the output, which is 0.55A at 9V or 0.4A at 12V, and less from a lower-voltage battery. The 4A in the chip's datasheet is a peak switch limit inside the chip, not the current you can take from the board.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__specs\"\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConverter chip\u003c\/span\u003e\u003cstrong\u003eMT3608 step-up, 1.2MHz\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInput voltage\u003c\/span\u003e\u003cstrong\u003e5V from the USB-C socket, or 2V to 24V on the VIN pads (chip range)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput voltage\u003c\/span\u003e\u003cstrong\u003eAdjustable, always above the input, up to 28V (chip limit). We suggest 24V or less\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eOutput current\u003c\/span\u003e\u003cstrong\u003eUp to about 5W from a 5V supply (NZN limit): 0.55A at 9V, 0.4A at 12V. Less from a battery\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eSwitch current limit\u003c\/span\u003e\u003cstrong\u003e4A peak inside the chip, not an output rating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eAdjustment\u003c\/span\u003e\u003cstrong\u003eMulti-turn trimmer, counter-clockwise raises the output\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eUSB-C socket\u003c\/span\u003e\u003cstrong\u003ePower in only, 5V. Use a USB-A to USB-C lead: a USB-C only charger with a C to C lead may give nothing\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eConnections\u003c\/span\u003e\u003cstrong\u003eVIN+ and VIN-, OUT+ and OUT- solder pads\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eReverse polarity\u003c\/span\u003e\u003cstrong\u003eNot protected on the VIN pads\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eInductor\u003c\/span\u003e\u003cstrong\u003e22µH (marked 220)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eMounting\u003c\/span\u003e\u003cstrong\u003eNo mounting holes. The four corner holes are the VIN and OUT pads, so fix the board with foam tape, not metal screws\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"nznpd__spec\"\u003e\n\u003cspan\u003eBoard size\u003c\/span\u003e\u003cstrong\u003eAbout 30 x 17mm\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eDatasheets\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__ds\"\u003e\n\u003ca class=\"nznpd__dsbar\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/PWR-MT3608-USBC-Datasheet-Rev1-2.pdf?v=1794911845\" target=\"_blank\" rel=\"noopener\" aria-label=\"Download the MT3608 USB-C boost converter datasheet (PDF)\"\u003e\n\u003csvg width=\"20\" height=\"20\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M14 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8z\"\u003e\u003c\/path\u003e\u003cpolyline points=\"14 2 14 8 20 8\"\u003e\u003c\/polyline\u003e\u003c\/svg\u003e\n\u003cspan\u003eFull technical datasheet\u003c\/span\u003e\n\u003cspan class=\"nznpd__dsmeta\"\u003ePDF\u003csvg width=\"17\" height=\"17\" viewbox=\"0 0 24 24\" fill=\"none\" stroke=\"currentColor\" stroke-width=\"2\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003cpath d=\"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4\"\u003e\u003c\/path\u003e\u003cpolyline points=\"7 10 12 15 17 10\"\u003e\u003c\/polyline\u003e\u003cline x1=\"12\" y1=\"15\" x2=\"12\" y2=\"3\"\u003e\u003c\/line\u003e\u003c\/svg\u003e\u003c\/span\u003e\n\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003ch3 class=\"nznpd__h\"\u003eGreat for\u003c\/h3\u003e\n\u003cdiv class=\"nznpd__uses\"\u003e\n\u003cdiv class=\"nznpd__use\"\u003eRunning a 9V guitar pedal or other 9V device from a USB charger\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eA 12V fan or a short run of LED lights, up to about 0.4A, from USB\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eLifting one Li-ion cell (3.7V) to 5V for an Arduino or ESP32 board\u003c\/div\u003e\n\u003cdiv class=\"nznpd__use\"\u003eA small bench supply for testing a project at a set voltage\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"nznpd__block\"\u003e\n\u003cdiv class=\"nznpd__qs\"\u003e\n\u003ch3\u003eWiring \u0026amp; getting started\u003c\/h3\u003e\n\u003col class=\"nznpd__steps\"\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003ePower it\u003c\/strong\u003e\u003cp\u003ePlug a USB-A to USB-C lead into the board and a USB-A port or charger. To use a battery or other supply instead, solder it to VIN+ and VIN-, with the plus on VIN+. There is no reverse-polarity protection, so check before you connect.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eSet the voltage before the load\u003c\/strong\u003e\u003cp\u003eWith nothing on OUT+ and OUT-, put a multimeter across them. Turn the trimmer a little at a time. Counter-clockwise raises the voltage. It is a multi-turn trimmer, so if the meter just shows the input voltage, keep turning counter-clockwise, up to 20 turns. If your board moves the other way, follow the meter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cdiv\u003e\n\u003cstrong\u003eConnect your project\u003c\/strong\u003e\u003cp\u003eOnce the meter shows the voltage you want, switch off, wire your project to OUT+ and OUT-, and power up again. With the load running, the voltage should hold steady and the chip, inductor and diode should be warm, not too hot to touch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n","brand":"NZN Electronics","offers":[{"title":"Default Title","offer_id":67798240526432,"sku":"PWR-MT3608-USBC","price":2.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6127\/0112\/files\/PWR-MT3608-USBC_hero.png?v=1794903166","url":"https:\/\/www.nznelectronics.co.nz\/products\/mt3608-usb-c-boost-converter-module","provider":"NZN Electronics","version":"1.0","type":"link"}