Clearance 600pc NZN metal film resistor kit, closed case with stress-whitened lid edge beside the hinge

Metal Film Resistor Kit - 600pc, 30 Values, Damaged Case - Clearance

$7.99 NZD $11.99 NZD
Skip to product information
Clearance 600pc NZN metal film resistor kit, closed case with stress-whitened lid edge beside the hinge
  • Clearance 600pc NZN metal film resistor kit, closed case with stress-whitened lid edge beside the hinge
  • Close-up of the crazed, whitened lid edge next to the hinge clip on the clearance resistor kit case
  • Metal film resistors sorted by value from 10 ohm to 1M
  • Metal film resistor dimensions, 1/4W axial through-hole
Metal Film Resistor Kit - 600pc, 30 Values, Damaged Case - Clearance
SKU: NZE-RES-MF-600-CL

Metal Film Resistor Kit - 600pc, 30 Values, Damaged Case - Clearance

$7.99 NZD $11.99 NZD Save 33%
Order before 7:30am for same-day dispatch 7-day dispatch, excluding public holidays

NZ Post: 1-2 days urban · 2-4 days rural

Shipping from $5.99 urban / $9.99 rural.

Easy 30-day returns · 12-month warranty

Free Urban delivery on orders over $66
Urban $66 Rural $88

Clearance - damaged case, 1 only. The clear storage case on this kit is damaged: the lid edge beside the hinge is stress-whitened and crazed, and one corner is slightly pushed in. The photos show this exact kit. The 600 resistors inside are new and undamaged, still on their labelled paper tapes, and carry our normal 12 month warranty. If you would rather have a perfect case, the standard 600pc resistor kit is $11.99.

A 600-piece 1/4W metal film resistor kit with 30 values from 10Ω to 1M, 20 of each, at ±1% tolerance. Every value sits on its own paper tape with the value printed on it, and the printed card in the lid lists the full range, so you can find the one you need quickly. Ideal bench stock for Arduino, ESP32 and general electronics work.

Specifications

TypeMetal film, axial through-hole
Values30 (10Ω to 1M)
Total pieces600 (20 per value)
Power rating1/4W (0.25W)
Tolerance±1%
Case conditionLid edge crazed and whitened, one corner dented (see photos)

Values in the kit

Ohms (12)10, 22, 47, 100, 150, 200, 220, 270, 330, 470, 510, 680
Kilo-ohms (17)1K, 2K, 2.2K, 3.3K, 4.7K, 5.1K, 6.8K, 10K, 20K, 47K, 51K, 68K, 100K, 220K, 300K, 470K, 680K
Mega-ohm (1)1M

Datasheets

Full technical datasheet PDF

What's in the box

600×
Metal film resistors, 30 values on labelled tapes

Supplied in the clear storage case shown, with its damaged lid edge and corner.

Great for

LED current limiting and pull-up or pull-down resistors
Voltage dividers for Arduino and ESP32 inputs
Breadboard prototyping and circuit repair

Wiring & getting started

  1. Find the value

    Each tape has its value printed on it, for example 220R or 3.3K. Off the tape, read the 5-band colour code or check with a multimeter.

  2. Check the power

    Each resistor is rated 1/4W. Work out V x I across the resistor and keep it well under 0.25W.

  3. Fit it either way round

    Resistors have no polarity. Bend the leads to your breadboard or PCB hole spacing and solder or plug in.

Frequently Asked Questions

Answers to the questions buyers ask most.

Why is this kit on clearance?
Its clear storage case is damaged. The lid edge beside the hinge is stress-whitened and crazed, and one corner is slightly pushed in, as shown in the photos of this exact kit. The resistors inside are new and undamaged.
Is there any warranty on a clearance item?
Yes. The resistors carry the same 12 month warranty as the rest of our range. The case damage shown in the photos is the reason for the discount, so it is not covered as a fault.
What values are in the kit?
30 values, 20 of each: 10, 22, 47, 100, 150, 200, 220, 270, 330, 470, 510 and 680 ohms; 1K, 2K, 2.2K, 3.3K, 4.7K, 5.1K, 6.8K, 10K, 20K, 47K, 51K, 68K, 100K, 220K, 300K, 470K and 680K; and 1M.
What power rating and tolerance are they?
1/4W (0.25W) with ±1% tolerance. Keep the power in each resistor well under 0.25W.
Will they fit a breadboard?
Yes. They are axial through-hole resistors with standard leads, so they plug into a breadboard and suit hand-soldered PCBs and protoboard. They are not for surface-mount work.

Have a Question About This Product?

Send it through and we will get back to you by email.

Why Buy from NZN

Useful parts, fair prices and someone local to help.

I'm Lukas, an engineering student and maker based in Te Awamutu. NZN grew out of a CNC build that dragged on for months because every missing cable, bolt or electronic part meant another overseas order. I started the shop so Kiwi makers can spend more time building and less time waiting for the next parcel.

More about NZN Electronics

  • Stocked here in New Zealand

    Orders are picked and packed in Te Awamutu and dispatched within 24 hours every day, excluding public holidays. NZ Post target delivery is 1-2 days urban and 2-4 days rural. In Te Awamutu and Kihikihi you can choose local delivery at checkout: same day if you order before 8am, otherwise next day.

  • Fair prices, clearly shown

    Prices are kept competitive and quantity discounts are shown upfront. Free delivery starts at $66 for urban addresses and $88 for rural addresses.

  • 30-day returns and 12-month warranty

    Get in touch if something is not right and we will help sort it.

  • Practical product support

    Ask a product question and get help from a real person in New Zealand who knows the range.

You may also like