Volcano Variant Nozzles for 3D Printers
0.2mm / Brass
$2.00 NZD
Skip to product information
$2.00 NZD
Volcano Variant Nozzles for 3D Printers
Availability:
Tax included. Shipping from $5.99 urban / $9.99 rural — free over $66.
30-day returns on faulty items · 12-month warranty
Urban $66
Rural $88
Volcano-style replacement nozzles for high-flow, high-volume 3D printing. Available in brass, stainless steel, and hardened steel across six tip sizes — from fine 0.2mm detail up to 1.5mm ultra-high-flow. Direct drop-in for E3D Volcano and compatible hotend blocks. 1.75mm filament.
Specifications
| Thread | M6 (Volcano hotend standard) |
| Filament Diameter | 1.75mm |
| Available Tip Sizes | 0.2 / 0.3 / 0.6 / 1.0 / 1.2 / 1.5mm |
| Available Materials | Brass, Stainless Steel, Hardened Steel |
| Max Temp (Brass / Stainless) | 300°C |
| Max Temp (Hardened Steel) | 500°C+ |
Brass — Best thermal conductivity, fast heating. The go-to choice for PLA, PETG, ABS, TPU, and PA.
Stainless Steel — Food-safe and corrosion-resistant. Slightly lower thermal conductivity — may require slightly higher temperatures. Good for food-contact prints.
Hardened Steel — Essential for abrasive filaments (carbon fibre, glow-in-the-dark, metal-fill). Brass nozzles wear rapidly with these materials. Rated to 500°C+.
Stainless Steel — Food-safe and corrosion-resistant. Slightly lower thermal conductivity — may require slightly higher temperatures. Good for food-contact prints.
Hardened Steel — Essential for abrasive filaments (carbon fibre, glow-in-the-dark, metal-fill). Brass nozzles wear rapidly with these materials. Rated to 500°C+.
Compatible Hotends
E3D Volcano (all variants)
E3D V6 Volcano-compatible blocks
Phaetus Dragon / Dragonfly Volcano
Slice Mosquito Magnum
Any hotend explicitly stating Volcano M6 compatibility
High-flow conversion builds using Volcano heater blocks
Common Questions
What makes Volcano nozzles different from standard V6 nozzles?
Volcano nozzles are longer and have a larger melt zone than standard V6 nozzles, allowing significantly higher volumetric flow rates. This makes them ideal for large-format, fast, or high-layer-height printing where a standard nozzle would struggle to melt filament fast enough. They require a Volcano-length heater block — they are not interchangeable with standard V6 blocks.
Will these fit my stock Ender 3 or CR-10?
No — stock Creality printers use an MK8 nozzle. Volcano nozzles require a Volcano heater block upgrade. If you're running a stock Creality hotend, see our MK8 nozzle listings instead.
How do I change the nozzle safely?
Always swap nozzles at temperature (around 200–230°C). Hold the heater block still with pliers and unscrew the nozzle with a spanner. Tighten the new nozzle while hot and snug it against the heatbreak. Run a PID autotune after changing nozzles.
Please note: Select your required size and material from the variant selector. Not all size/material combinations may be in stock — check the variant list before ordering.