MakerBot MK8 Variant Nozzles For 3D Printers
Brass / 0.2mm
Sale price
$2.00 NZD
Regular price
$2.64 NZD
Skip to product information
$2.00 NZD
$2.64 NZD
Save 24%
MakerBot MK8 Variant Nozzles For 3D Printers
Availability:
Gone once out of stock
Tax included. Shipping from $5.99 urban / $9.99 rural — free over $66.
30-day returns on faulty items · 12-month warranty
Urban $66
Rural $88
MK8-compatible replacement nozzles with a wider 8mm head — available in brass, stainless steel, and hardened steel, across a broader range of tip sizes than most suppliers carry. Includes uncommon sizes like 0.3mm, 0.35mm, 0.45mm, and 0.7mm. Suits Ender 3, CR-10, and all MK8-threaded hotends. Compatible with both 1.75mm and 3mm filament.
Specifications
| Head Diameter | 8mm (wider than standard 6mm MK8) |
| Body | 13mm × 6mm |
| Thread Diameter | M6 |
| Filament Compatibility | 1.75mm & 3mm |
| Available Materials | Brass, Stainless Steel, Hardened Steel |
Material Specifications
| Brass — Max Temp | 300°C |
| Brass — Compatible Filaments | PLA, ABS, PA, TPU |
| Brass — Available Sizes | 0.2 / 0.25 / 0.3 / 0.35 / 0.45 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0mm |
| Stainless Steel — Max Temp | 300°C |
| Stainless Steel — Compatible Filaments | PLA, ABS, PA, TPU (food-safe) |
| Stainless Steel — Available Sizes | 0.3 / 0.4 / 0.5 / 0.8mm |
| Hardened Steel — Max Temp | 400°C |
| Hardened Steel — Compatible Filaments | PLA, PETG, ABS, PA, TPU + abrasive filaments |
| Hardened Steel — Available Sizes | 0.3 / 0.6 / 0.8 / 0.9mm |
Brass — Best thermal conductivity, fast heating, most versatile. Use for all standard filaments.
Stainless Steel — Food-safe and corrosion resistant. Slightly lower thermal conductivity — may need higher temps. Good for food-contact prints.
Hardened Steel — Required for abrasive filaments (carbon fibre, glow-in-the-dark, metal-fill). Brass wears rapidly with these — hardened steel is the correct choice.
Stainless Steel — Food-safe and corrosion resistant. Slightly lower thermal conductivity — may need higher temps. Good for food-contact prints.
Hardened Steel — Required for abrasive filaments (carbon fibre, glow-in-the-dark, metal-fill). Brass wears rapidly with these — hardened steel is the correct choice.
Compatible Printers
Creality Ender 3, Ender 3 V2, Ender 3 S1
Creality Ender 5, CR-10 & CR-10S series
Artillery Sidewinder & Genius series
Anycubic Mega series
All MK8-variant hotends & extruders
Any printer with an M6-threaded MK8-style hotend
Common Questions
What makes these "MK8 variant" nozzles different from standard MK8?
These nozzles have a wider 8mm hex head compared to the standard 6mm found on most modern MK8 nozzles. The thread and fitment are fully MK8 compatible — the wider head just requires a different spanner size (8mm vs 6mm) for installation. Functionally, they print identically.
How do I swap the nozzle safely?
Always change nozzles while the hotend is hot (around 200–230°C). Hold the heater block firmly, unscrew the old nozzle, and install the new one. Tighten snugly while hot — over-tightening cold can crack the heater block.
Do these support 3mm filament?
Yes — unlike many modern nozzles which are 1.75mm only, these are compatible with both 1.75mm and 3mm filament, making them useful for older printer setups running 3mm.
Please note: Select your required material and tip size from the variant selector. Not all size/material combinations are available — check the variant list for current stock.