MK8 Variant 3D Printer Nozzles – Brass & Hardened Steel
Brass / 0.2mm
$2.64 NZD
Skip to product information
$2.64 NZD
MK8 Variant 3D Printer Nozzles – Brass & Hardened Steel
Availability:
Tax included. Shipping from $5.99 urban / $9.99 rural — free over $66.
30-day returns on faulty items · 12-month warranty
Urban $66
Rural $88
Standard 6mm-head MK8 replacement nozzles available in brass and hardened steel — covering sizes from 0.2mm fine detail up to 1.5mm high-flow. A direct drop-in for Ender 3, CR-10, and all MK8-threaded hotends. Compatible with both 1.75mm and 3mm filament.
General Specifications
| Head Diameter | 6mm (standard MK8) |
| Body | 13mm × 6mm |
| Thread | M6 |
| Filament Compatibility | 1.75mm & 3mm |
| Available Materials | Brass, Hardened Steel |
Material Specifications
| Brass — Max Temp | 300°C |
| Brass — Compatible Filaments | PLA, ABS, PA, TPU |
| Brass — Available Sizes | 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.5mm |
| Hardened Steel — Max Temp | 400°C |
| Hardened Steel — Compatible Filaments | PLA, PETG, ABS, PA, TPU + abrasive filaments |
| Hardened Steel — Available Sizes | 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.5mm |
Brass — Best thermal conductivity, fast heating, most versatile. The standard choice for PLA, ABS, TPU, and PA.
Hardened Steel — Required for abrasive filaments (carbon fibre, glow-in-the-dark, metal-fill, wood-fill). Brass wears rapidly with these materials — hardened steel is the correct choice. Rated to 400°C.
Hardened Steel — Required for abrasive filaments (carbon fibre, glow-in-the-dark, metal-fill, wood-fill). Brass wears rapidly with these materials — hardened steel is the correct choice. Rated to 400°C.
Compatible Printers
Creality Ender 3, Ender 3 V2, Ender 3 S1
Creality Ender 5, CR-10 & CR-10S series
Artillery Sidewinder & Genius series
Anycubic Mega series
All standard MK8-threaded hotends
Any printer with an M6-threaded MK8-style hotend
Common Questions
How is this different from the MakerBot MK8 Variant listing?
This listing uses the standard 6mm hex head found on modern MK8 nozzles and requires a standard 6mm spanner. The MakerBot MK8 Variant listing uses an older 8mm hex head design. Both are fully MK8-thread compatible — the difference is just the head size and available size range.
How do I swap the nozzle safely?
Always change nozzles while the hotend is hot (around 200–230°C). Hold the heater block firmly, unscrew the old nozzle, and thread in the new one. Tighten snugly while hot — do not over-tighten cold, as this can crack the heater block.
Please note: Select your required material and tip size from the variant selector. Not all size/material combinations may be in stock — check the variant list before ordering.