Black 22 AWG solid core hook-up wire, 10 m coil

22 AWG Solid Core Hook-Up Wire - 10 m Coil

Black
$13.49 NZD
Skip to product information
SKU: WIRE-22AWG-SOL-10M-BLK

22 AWG Solid Core Hook-Up Wire - 10 m Coil

$13.49 NZD
Colour
Availability:
Order before 12:00pm for same-day dispatch Dispatch 7 days a week, excluding public holidays

NZ Post: 1-2 days urban · 2-4 days rural

Shipping from $5.99 urban / $9.99 rural, or free pick-up in Te Awamutu.

Easy 30-day returns · 12-month warranty

Add $50.00 for Free Urban delivery ($88.00 for Rural)
Urban $50 Rural $88

Solid core hook-up wire is the stiff, single-strand wire used for breadboard jumpers and tidy point-to-point wiring. This is 22 AWG, the size that pushes straight into a breadboard or an Arduino header socket and stays there, in a 10 m coil you cut to length.

Use it to make breadboard jumpers the exact length you need, to wire stripboard and perfboard, or to run links inside a project box. It holds the shape you bend it into, so it suits wiring that stays still. A lead that flexes in use, such as one running to a hinged lid or a moving motor, needs stranded wire instead, like our 26 AWG hook-up wire. Choose black, red, white, yellow or blue.

Specifications

Length10 m, one continuous piece
Size22 AWG
ConductorSingle solid strand of tinned copper, about 0.6 mm
Outer diameterAbout 1.6 mm
InsulationPVC, marked 80°C 300V
ColoursBlack, red, white, yellow, blue
FitsBreadboards and 2.54mm header sockets
Stripper notch22 AWG or 0.6 mm
In the box1 coil, no reel

Wiring & getting started

  1. Cut and strip

    Cut the length you need and strip 6 to 8 mm from each end for a breadboard. Use the 22 AWG (0.6 mm) notch on your wire strippers. A nick in a solid conductor is where it snaps later, so if you score the metal, cut the end off and strip it again.

  2. Push it in

    Push the bare end straight down into the breadboard hole, then bend the wire flat to the board for a tidy layout. When an end gets kinked after a few uses, snip it off and strip a fresh one instead of forcing it in.

  3. Soldering

    The conductor is tinned, so solder takes to it easily. PVC insulation softens and pulls back from the joint if the iron stays on too long, so make each joint in two or three seconds.

Note: This wire is for low-voltage electronics, such as 5V, 12V and 24V projects. Do not use it for mains or fixed house wiring.

Frequently Asked Questions

Answers to the questions buyers ask most.

Is the price for one colour or a set?
One coil in the colour you choose. Each coil is a single 10 m length. For several colours, add each one to the cart.
Does it work in screw terminals and WAGO 221 lever connectors?
Yes. Solid wire clamps directly and needs no ferrule. Strip 11 mm for a WAGO 221.

Have a Question About This Product?

Send it through and we will get back to you by email.

Why Buy from NZN

Useful parts, fair prices and someone local to help.

I'm Lukas, an engineering student and maker based in Te Awamutu. NZN grew out of a CNC build that dragged on for months because every missing cable, bolt or electronic part meant another overseas order. I started the shop so Kiwi makers can spend more time building and less time waiting for the next parcel.

  • Stocked here in New Zealand

    Orders are picked and packed in Te Awamutu and dispatched within 24 hours every day, excluding public holidays. NZ Post target delivery is 1-2 days urban and 2-4 days rural. In Te Awamutu and Kihikihi you can choose local delivery at checkout: same day if you order before 8am, otherwise next day.

  • Fair prices, clearly shown

    Prices are kept competitive and quantity discounts are shown upfront. Free delivery starts at $50 for urban addresses and $88 for rural addresses.

  • 30-day returns and 12-month warranty

    Get in touch if something is not right and we will help sort it.

  • Practical product support

    Ask a product question and get help from a real person in New Zealand who knows the range.

You may also like