This yellow adapter joins a 4 mm male bullet to a 5 mm male bullet. The narrow end has a 4 mm socket and the wide end has a 5 mm socket, so you can plug together two leads with different bullet sizes without cutting a connector off. Both males push straight in and nothing is crimped onto the adapter, so the joint comes apart again whenever you need it to.
Specifications
Datasheets
Great for
Wiring & getting started
- Check the bullet sizes with power off
The 4 mm male goes in the narrow end and the 5 mm male in the wide end. If you're not sure which is which, a 4 mm bullet is the same thickness as a 4 mm drill bit.
- Push both males fully in
Push each male in until its collar reaches the sleeve. It takes a firm push, because the sockets are made to grip.
- Check the joint
Give each lead a light tug and neither should pull out. A multimeter on continuity should beep from one lead to the other.
