Clearance - final units. We have a small number of these springs and won't be restocking them. They are new and unused, and our 12 month warranty still applies.
A compression spring pushes back when you squeeze it. You put it between two parts, and when they are pressed together the spring pushes them apart again. This one is zinc-plated steel, 8 mm across the outside and 35 mm long at rest, with about 10 coils. You can use it to push a button or plunger back out, or to replace a worn spring of the same size. If you need a spring that pulls instead, see our small extension springs.
Both ends are closed: the last coil is wound down to touch the one beside it. That lets each end sit flat against a washer or a surface. The spring slides over a rod or screw up to about 6 mm thick, or sits in a hole of 9 mm or more. A spring this long and thin bows sideways if you squeeze it with nothing to guide it, so fit it over a rod or inside a hole. They are priced each, with a minimum of 2.
