Clearance - final units. We have a small number of these springs and won't be restocking them. They are new and unused, and our 12 month warranty still applies.
An extension spring pulls two parts back together. You hook a loop over a pin or screw at each end, and when the parts move apart the spring pulls them back. These are small zinc-plated steel springs with a closed round loop at each end. You can use one to pull a latch back to its rest position, or to replace a worn return spring of the same size. If you need a spring that pushes instead, see the 8 x 35 mm compression spring.
There are five sizes. The first number is the outside diameter of the coils and the second is the length of the coiled body, not counting the loops. The loops add about 6 to 7 mm at each end on the 7 mm and 8 mm springs and about 3 mm on the 4 mm spring, so measure the coiled body of your old spring and match that. The 4 x 73 mm is long and thin, and its loops are small. They take a pin or screw up to about 2 mm thick. They are steel, so a magnet picks them up. They are priced each, with a minimum of 2.
Specifications
Note: A spring pulled too far stays stretched. You will see gaps between the coils when it is relaxed, and it no longer pulls back as hard. If the job needs a long pull, choose a longer spring instead of stretching a short one hard.
