WAGO 221-415 5-pole lever wire connector

WAGO 221-415 Lever Connectors - 5 Pole Lever Nuts, 32A 450V

$3.99 NZD
Save 12% at 5+
Skip to product information
SKU: WAGO-221-415

WAGO 221-415 Lever Connectors - 5 Pole Lever Nuts, 32A 450V

$3.99 NZD
5.0 1 review
Availability:
Dispatch: Within 24 hours 7-day dispatch, excluding public holidays

NZ Post: 1-2 days urban · 2-4 days rural

Shipping from $5.99 urban / $9.99 rural.

Buy more, pay less Prices shown are per unit. Add enough of this item and the lower rate applies on its own at checkout. There is no code to enter and you do not need to buy a pack. Choosing a tier here just sets the quantity for you. Larger quantities go out in the same bag, so packing, handling and postage cost us less per unit. We pass that saving straight on to you, so you can buy more for less.

Easy 30-day returns · 12-month warranty

Free Urban delivery on orders over $66
Urban $66 Rural $88

Five wires into one joint, in about the time it takes to strip them. Flip the levers up, push each wire home, snap them shut - no twisting, no wire nuts, no tools. These are the real WAGO 221-415s, the connector sparkies reach for when a junction box has more wires than hands. They take solid, stranded or fine-stranded wire from 0.2-4mm², handle 32A at 450V, and open back up whenever you need to change something. The clear housing lets you see every conductor is seated properly. Sold as singles, so buy the number the job needs.


  • Real WAGO 221 series (221-415, 5-conductor)
  • No tools - lift the lever, push the wire in, close
  • Joins up to five wires in one connector
  • Solid, stranded and fine-stranded all welcome
  • Wire range 0.2-4mm² (0.14-4mm² fine-stranded)
  • Rated 32A · 450V (IEC)
  • Reusable - open it up and rewire any time
  • Clear body so you can check the wire is fully in

Specifications


TypeWAGO 221-415 COMPACT splicing connector with levers
Poles5-conductor (joins up to 5 wires)
Rated current (IEC)32A
Rated voltage (IEC)450V
StandardIEC/EN 60998-2-2 (splicing connector with levers)
Safety markings on this stockPSE · JET 20A 300V · Cu 1.6/2.0mm
Temperature ratingT85 (up to 85°C)
HousingTransparent polycarbonate, halogen-free, orange levers
RoHSCompliant
Wire (solid/stranded)0.2-4mm² (24-12 AWG)
Wire (fine-stranded)0.14-4mm² (with or without ferrule)
Strip length11mm
Dimensions30.0 × 18.6 × 8.3mm (L×W×H)
ActuationTool-free lever
ReusableYes

What's in the box


WAGO 221-415 (5-conductor) lever connector

Sold individually - add the quantity your project needs.

Great for


Lighting & downlight wiring
LED strip & sign connections
Junction box & mains splices
Multi-wire junctions & distribution
Appliance & fixture repairs
DIY, maker & prototyping wiring

How to use

  1. Strip the wire

    About 11mm of bare copper on each conductor.

  2. Lift the lever

    Flip it up and the port opens.

  3. Push in and close

    Seat the wire all the way, then press the lever back down.

  4. Check it, or change it

    The clear body shows you the wire is fully home. Need to rewire? Just lift the lever again.

Good to know: Genuine WAGO 221-415, sold individually. Mains work should always follow NZ wiring rules and be done or checked by a registered electrician. Every order is checked before it ships from our Te Awamutu stock.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous

Worked perfectly

Frequently Asked Questions

Answers to the questions buyers ask most.

Are these genuine WAGO?
Yes. These are genuine WAGO 221-415 COMPACT splicing connectors from WAGO Kontakttechnik (Minden, Germany), not a lookalike. WAGO lists the 221-415 as a 5-conductor splicing connector with operating levers, suitable for all conductor types up to 4 mm², with a transparent housing and a T85 temperature rating. The levers are stamped WAGO 221 and the housing carries the PSE / JET 20A 300V approval markings.
How many wires does it join?
Up to five. Each port has its own lever, so you can join anywhere from two to five conductors in one connector, and you can mix wire types and sizes across the ports.
Can I reuse them?
Yes. Lift a lever to release a wire and re-clamp it as often as you like, which makes them handy for testing and temporary joins.
What wire can they take?
Solid and stranded from 0.2-4mm² (roughly 24-12 AWG), and fine-stranded from 0.14mm², with or without a ferrule. Different wire types and sizes can share the same connector.
Are they safe for mains wiring?
They are rated 32A at 450V (IEC) for solid and stranded conductors and the housing carries PSE / JET 20A 300V markings. Mains work still needs to follow NZ wiring rules and be done or checked by a registered electrician.

Have a Question About This Product?

Send it through and we will get back to you by email.

Why Buy from NZN

Useful parts, fair prices and someone local to help.

I'm Lukas, an engineering student and maker based in Te Awamutu. NZN grew out of a CNC build that dragged on for months because every missing cable, bolt or electronic part meant another overseas order. I started the shop so Kiwi makers can spend more time building and less time waiting for the next parcel.

  • Stocked here in New Zealand

    Orders are picked and packed in Te Awamutu and dispatched within 24 hours every day, excluding public holidays. NZ Post target delivery is 1-2 days urban and 2-4 days rural.

  • Fair prices, clearly shown

    Prices are kept competitive and quantity discounts are shown upfront. Free delivery starts at $66 for urban addresses and $88 for rural addresses.

  • 30-day returns and 12-month warranty

    Get in touch if something is not right and we will help sort it.

  • Practical product support

    Ask a product question and get help from a real person in New Zealand who knows the range.

You may also like