Red 24 AWG stranded hook-up wire, 10 m coil tied with a white cable tie

24 AWG Stranded Hook-Up Wire - 10 m Coil, 6 Colours

Red
$4.99 NZD
Save 5% at 3+
Skip to product information
SKU: WIRE-24AWG-STR-10M-RED

24 AWG Stranded Hook-Up Wire - 10 m Coil, 6 Colours

$4.99 NZD
Colour
Availability:
Order before 7:30am (12pm weekends) for same-day dispatch Dispatch 7 days a week, excluding public holidays

NZ Post: 1-2 days urban · 2-4 days rural

Shipping from $5.99 urban / $9.99 rural, or free pick-up in Te Awamutu.

Buy more, pay less Prices shown are per unit. Add enough of this item and the lower rate applies on its own at checkout. There is no code to enter and you do not need to buy a pack. Choosing a tier here just sets the quantity for you. Larger quantities go out in the same bag, so packing, handling and postage cost us less per unit. We pass that saving straight on to you, so you can buy more for less.

Easy 30-day returns · 12-month warranty

Add $50.00 for Free Urban delivery ($88.00 for Rural)
Urban $50 Rural $88

Stranded hook-up wire is made of many fine strands, so it bends and flexes without snapping. This is 24 AWG in a 10 m coil you cut to length, the right weight for leads inside a project box, wiring to screw terminals and solder joints, and cables that get moved.

Choose red, black, white, blue, green or yellow. For a breadboard, solid wire is the better fit because stranded ends splay and will not push in cleanly, so use our 22 AWG solid core wire for jumpers. For a shorter, finer coil see the 26 AWG 5 m wire.

Specifications

Length10 m, one continuous piece
Size24 AWG
ConductorStranded, fine tinned strands
Outer diameterAbout 1.4 mm
InsulationPVC
ColoursRed, black, white, blue, green, yellow
EndsUnterminated
Stripper notch24 AWG
In the box1 coil, no reel

Wiring & getting started

  1. Cut and strip

    Cut the length you need and strip 6 to 8 mm. Use the 24 AWG notch on your wire strippers so no strands are cut. Twist the strands together in one direction before you use the end.

  2. Terminals and connectors

    Twist the end and put a little solder on it, or crimp on a ferrule, before it goes into a screw terminal, so no stray strands escape. Strip 11 mm for a WAGO 221 lever connector.

  3. Soldering

    The strands are tinned, so solder takes easily. PVC insulation softens and pulls back from the joint if the iron stays on too long, so keep each joint to two or three seconds.

Note: This wire is for low-voltage electronics, such as 5V, 12V and 24V projects. Do not use it for mains or fixed house wiring.

Frequently Asked Questions

Answers to the questions buyers ask most.

Is the price for one colour or a set?
One coil in the colour you choose. Each coil is a single 10 m length. For several colours, add each one to the cart.
Is this UL1007 wire?
It is made as UL1007 style wire, which means PVC insulation rated for 80°C and 300V. We have not been able to check a UL file for this coil, so we sell it as 24 AWG PVC hook-up wire for low-voltage electronics and do not claim a UL listing.
Will it go into a breadboard?
Not cleanly. Stranded ends splay out and the strands can break off inside the hole. Twist and tin the end with a little solder and it will go into a header socket. For breadboard jumpers, solid core wire is the better choice.
How much current can it carry?
It suits signal wiring and low-power leads. For anything that pulls more than about 1 A, such as a motor or a heater, use a thicker wire.
Does it work in screw terminals and WAGO 221 lever connectors?
Yes. Twist the strands and tin the end or crimp a ferrule for a screw terminal. A WAGO 221 takes the twisted end directly, stripped 11 mm.
Can I use it for mains wiring?
No. Use it only in low-voltage electronic circuits, not for fixed house wiring or direct mains connections.

Have a Question About This Product?

Send it through and we will get back to you by email.

Why Buy from NZN

Useful parts, fair prices and someone local to help.

I'm Lukas, an engineering student and maker based in Te Awamutu. NZN grew out of a CNC build that dragged on for months because every missing cable, bolt or electronic part meant another overseas order. I started the shop so Kiwi makers can spend more time building and less time waiting for the next parcel.

  • Stocked here in New Zealand

    Orders are picked and packed in Te Awamutu and dispatched within 24 hours every day, excluding public holidays. NZ Post target delivery is 1-2 days urban and 2-4 days rural. In Te Awamutu and Kihikihi you can choose local delivery at checkout: same day if you order before 8am, otherwise next day.

  • Fair prices, clearly shown

    Prices are kept competitive and quantity discounts are shown upfront. Free delivery starts at $50 for urban addresses and $88 for rural addresses.

  • 30-day returns and 12-month warranty

    Get in touch if something is not right and we will help sort it.

  • Practical product support

    Ask a product question and get help from a real person in New Zealand who knows the range.

You may also like