WAGO 221-412 2 pole lever wire connector

WAGO 221-412 Lever Connectors - 2 Pole Lever Nuts, 32A 450V

$1.99 NZD
Save 10% at 5+
Skip to product information
WAGO 221-412 2 pole lever wire connector
  • WAGO 221-412 2 pole lever wire connector
  • WAGO 221-412 2 pole lever connector top down view
  • WAGO 221-412 connector joining two wires with lever open
  • WAGO 221-412 dimensions 18.6 x 13.2 x 8.3 mm
WAGO 221-412 Lever Connectors - 2 Pole Lever Nuts, 32A 450V
SKU: WAGO-221-2P

WAGO 221-412 Lever Connectors - 2 Pole Lever Nuts, 32A 450V

$1.99 NZD
6 bought this month
Dispatch: Within 24 hours 7-day dispatch, excluding public holidays

NZ Post: 1-2 days urban · 2-4 days rural

Shipping from $5.99 urban / $9.99 rural.

Buy more, pay less Prices shown are per unit. Add enough of this item and the lower rate applies on its own at checkout. There is no code to enter and you do not need to buy a pack. Choosing a tier here just sets the quantity for you. Larger quantities go out in the same bag, so packing, handling and postage cost us less per unit. We pass that saving straight on to you, so you can buy more for less.

Easy 30-day returns · 12-month warranty

Free Urban delivery on orders over $66
Urban $66 Rural $88

The WAGO 221-412 is a compact reusable lever connector for joining two copper conductors. Lift each orange lever, insert the stripped conductor fully, then close the lever. The clear housing makes the conductor position easy to inspect, and the connection can be reopened when wiring changes.

Specifications

ModelWAGO 221-412
Connection points2
Rated current32 A
Rated voltage450 V
Rated impulse voltage4 kV
Temperature classT85, max 85°C ambient
Solid or stranded copper0.2 to 4 mm²
Fine-stranded copper0.14 to 4 mm²
Conductor rangeAWG 24 to 12
Strip length11 mm
Dimensions18.30 x 13.00 x 8.15 mm
Approximate weight1.71 g

Datasheets

Full technical datasheet PDF

What's in the box

1×
WAGO 221-412 two-conductor lever connector

Sold individually, so add the quantity your project needs.

Great for

Lighting and fixture wiring
Joining stranded flex to solid copper wire
LED and sign connections
Repairs, extensions and prototyping

Wiring & getting started

  1. Isolate power

    Disconnect and verify power is off before handling conductors.

  2. Strip the conductor

    Remove 11 mm of insulation without nicking the copper.

  3. Lift and insert

    Raise the lever fully and push the conductor all the way into the port.

  4. Close and check

    Lower the lever, inspect the conductor through the housing, then gently tug-check the connection.

Note: Use copper conductors only. Mains installation must follow New Zealand wiring rules and be completed or checked by a suitably qualified person.

Frequently Asked Questions

Answers to the questions buyers ask most.

Are these genuine WAGO?
Yes. These are genuine WAGO 221-412 COMPACT splicing connectors from WAGO Kontakttechnik (Minden, Germany), not a lookalike. WAGO lists the 221-412 as a 2-conductor splicing connector with operating levers, suitable for all conductor types up to 4 mm², with a transparent housing and a T85 temperature rating. The levers are stamped WAGO 221 and the body is marked cULus, AWG 24-12, 0.14/0.2-4mm², 450V/32A.
What is the difference between the 221-412, 221-413 and 221-415?
Only the number of ports. The 221-412 joins two wires, the 221-413 joins three and the 221-415 joins five. Wire range, current rating and lever action are identical across all three, so pick whichever matches the number of conductors in the joint.
Can I reuse them?
Yes. Lift a lever to release a wire and re-clamp it as often as you like, which makes them handy for testing and temporary joins.
What wire can they take?
Solid and stranded from 0.2-4mm² (roughly 24-12 AWG), and fine-stranded from 0.14mm², with or without a ferrule. You can put a stranded flex in one side and solid house wire in the other.
Are they safe for mains wiring?
They are rated 32A at 450V for solid and stranded conductors and the body carries cULus approval markings. Mains work still needs to follow NZ wiring rules and be done or checked by a registered electrician.

Have a Question About This Product?

Send it through and we will get back to you by email.

Why Buy from NZN

Useful parts, fair prices and someone local to help.

I'm Lukas, an engineering student and maker based in Te Awamutu. NZN grew out of a CNC build that dragged on for months because every missing cable, bolt or electronic part meant another overseas order. I started the shop so Kiwi makers can spend more time building and less time waiting for the next parcel.

More about NZN Electronics

  • Stocked here in New Zealand

    Orders are picked and packed in Te Awamutu and dispatched within 24 hours every day, excluding public holidays. NZ Post target delivery is 1-2 days urban and 2-4 days rural.

  • Fair prices, clearly shown

    Prices are kept competitive and quantity discounts are shown upfront. Free delivery starts at $66 for urban addresses and $88 for rural addresses.

  • 30-day returns and 12-month warranty

    Get in touch if something is not right and we will help sort it.

  • Practical product support

    Ask a product question and get help from a real person in New Zealand who knows the range.

You may also like