Three wires, one connector, about five seconds of work. Flip the levers up, push each stripped wire in, snap them shut and the joint is done - no twisting, no wire nuts, no tools. These are the real WAGO 221-413s, the same connector sparkies use in downlight cans and junction boxes every day. They'll take solid, stranded or fine-stranded wire from 0.2-4mm², handle 32A at 450V, and you can pop them open and rewire them as many times as you like. The clear housing means you can actually see the copper is seated where it should be. Sold as singles, so grab the number the job needs.
- Real WAGO 221 series (221-413, 3-conductor)
- No tools - lift the lever, push the wire in, close
- Joins two or three wires in one connector
- Solid, stranded and fine-stranded all welcome
- Wire range 0.2-4mm² (0.14-4mm² fine-stranded)
- Rated 32A · 450V (IEC)
- Reusable - open it up and rewire any time
- Clear body so you can check the wire is fully in
Specifications
What's in the box
Sold individually - add the quantity your project needs.
Great for
How to use
- Strip the wire
About 11mm of bare copper on each conductor.
- Lift the lever
Flip it up and the port opens.
- Push in and close
Seat the wire all the way, then press the lever back down.
- Check it, or change it
The clear body shows you the wire is fully home. Need to rewire? Just lift the lever again.
Good to know: Genuine WAGO 221-413, sold individually. Mains work should always follow NZ wiring rules and be done or checked by a registered electrician. Every order is checked before it ships from our Te Awamutu stock.